ENGLISH FRANÇAIS ﺍﻟﻌﺭﺑﻳﺔ OWNER’S MANUAL Mini Hi-Fi System Please read this manual carefully before operating your set and retain it for future reference. CM4230 (CM4230, CMS4230F) CM4230-AU.DMARLLK ENG 6460.
CM4230-AU.DMARLLK ENG 6460.
Getting Started 3 Safety Information CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Table of Contents Table of Contents 1 Getting Started 3 6 6 6 6 7 7 8 10 11 Safety Information Unique Features Accesories Playable file Requirement – MP3/WMA music file requirement – Compatible USB Devices – USB device requirement Front Panel Remote Control Rear Panel 2 Connecting 12 12 12 12 13 13 Connecting to speakers – Attaching the speakers to the unit Optional Equipment Connection – AUX IN Connection – USB Connection – Listening to the sound from your external device – Antenna Connection 13
Getting Started Unique Features 1 Playable file Requirement USB Direct Recording Getting Started Records music to your USB device. AUTO DJ MP3/WMA music file requirement Blends the end of one song into the beginning of another for seamless playback. MP3/WMA file compatibility with this unit is limited as follows. USB Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) Listens to music from your USB device.
Getting Started 7 Compatible USB Devices MP3 Player : Flash type MP3 player. USB Flash Drive : Devices that support USB2.0 or USB1.1. 1 Getting Started The USB function of this unit does not support all USB devices. USB device requirement Devices which require additional program installation when you have connected it to a computer, are not supported. Do not extract the USB device while in operation. For a large capacity USB, it may take longer than a few minute to be searched.
Getting Started Front Panel 1 Getting Started CM4230-AU.DMARLLK ENG 6460.
Getting Started 9 a Disc tray Loads a disc. j BASS BLAST Reinforces the treble, bass and surround effect. b EQ Chooses sound impressions. k TST./MO. - Starts or pauses playback. - Selects Stereo/Mono. d SET/DEMO - Confirms the setting. - Demonstrates each of functions. e TIMER Uses your unit as an alarm clock. 1 l CLOCK Sets the clock and checks the time. Getting Started c Y (Skip/Search) - Searches forward. - Skips to the previous track/file. m Volume knob Adjusts volume of speaker. n FUNC.
Getting Started Remote Control 1 Getting Started • • • • • • a • • • • • • C/V (Skip/Search) : 1 (Power) : Switches the unit ON or OFF. - Skips Fast backward or Forward. B (Open/Close) : Opens and closes the disc tray. PRESET.FOLDER W/S : - Searches for a folder of MP3/ WMA files. When a CD/USB containing MP3/WMA files in several folders is being played, press PRESET.FOLDER W/S to select the folder you want to play. - Chooses a preset number for a radio station.
Getting Started 11 Rear Panel 1 Getting Started a AUX IN (L/R) connectors d SPEAKERS terminal b ANTENNA (FM/AM) c POWER IN CM4230-AU.DMARLLK ENG 6460.
2 Connecting Connecting to speakers Optional Equipment Connection Attaching the speakers to the unit AUX IN Connection Connecting To connect the cable to the unit, press each plastic finger pad to open the connection terminals on the unit. Insert the wire and release the finger pad. Connect an output of auxiliary device(Camcoder, TV, Player, etc) to the AUX IN(L/R) connector. If your device has only one output for audio(mono), connect it to the left (white) audio jack on the unit.
Connecting 13 USB Connection Antenna Connection Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. Connect the supplied FM/AM antenna for listening to the radio. Connect the FM wire antenna to the FM antenna connector. Connect the AM loop antenna to the AM antenna connector. 2 Connecting , Note Removing the USB Device from the unit. 1. Choose a different function/mode or press I(Stop) twice in a row. 2. Remove the USB device from the unit.
Operating Basic Operations Other Operations CD/USB Operations Programmed Playback 1. Insert the disc by pressing B on the remote control or R on the unit. Connect the USB device to the USB port. The program function enables you to store your favorite files from any disc or USB device. 2. Select the CD or USB function by pressing FUNCTION on the remote control or FUNC. on the unit. 1. Insert a CD or connect your USB and wait for it to be ordered. 3.
Operating 15 Turn off the sound temporarily DEMO Press MUTE@ on the remote control to mute your sound. In power off state, press SET/DEMO on the unit once. The unit will power on and display the each of functions in the display window. To cancel the DEMO function, press SET/DEMO once more. You can mute your sound, for example, to answer the telephone, the “MUTE” will appear and blink in the display window. To cancel it, press MUTE @ again or change the volume level.
Operating AUTO DJ playback Auto Power Down Auto DJ blends the end of one song into the beginning of another for seamless playback. It equalizes volume across tracks for uninterrupted playback. This unit will be off itself to save electronic consumption in the case main unit is not connected to external device and is not used for 25 minutes. So does this unit after 6 hours since Main unit has been connected to other device using analog input.
Operating Radio Operations 17 Presetting the Radio Stations You can preset 50 stations for FM/AM. Be sure that FM/AM aerial is connected. (Refer to the page 13) Listening to the radio 1. Press FUNCTION on the remote control or FUNC. on the unit until FM/AM appears in the display window. The last received station is tuned in. 2. Auto tuning : Press TUNING -/+ on the remote control or Y/U on the unit for about 2 seconds until the frequency indication starts changing, then release.
Operating Sound adjustment Setting the surround mode This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT on the remote control or EQ on the unit. The displayed items for the Equalizer may be different depending on sound sources and effects. On Display Description NATURAL You can enjoy comfortable and natural sound.
Operating Setting the Clock 1. Turn the unit on. 2. Press CLOCK. 3. Choose time mode by pressing Y/U. - AM 12:00 (for an AM and PM display) or 0:00 (for a 24 hour display) 4. Press SET/DEMO to confirm your selection. 5. Select the hours by pressing Y/U. 6. Press SET/DEMO. 7. Select the minutes by pressing Y/U. 8. Press SET/DEMO. Setting the alarm You can use the unit as an alarm clock. You have to set the clock before setting the alarm. 1. Turn the unit on. 2. Press TIMER. 3. Each of functions will blink.
Operating Advanced Operation Recording to USB You can record various sound sources to USB. 1. Connect the USB device to the unit. 2. Select a function by pressing FUNCTION on the remote control or FUNC. on the unit. One track/file recording - You can record to USB after playing a track/file you want. 3 , Note You can check the recording percentage rate for the USB record on the display window during the recording. (MP3/WMA CD Only) During recording MP3/WMA, there is no sound.
Troubleshooting 21 Troubleshooting Problem Cause & Correction The power cord is not plugged in. Plug in the power cord. No Power. No sound. Check whether electricity failed.Check the condition by operating other electronic devices. Check whether you select a right function. Press FUNC. and check the selected function. Speaker cables are not connected correctly. Connect speaker cables correctly. An unplayable disc is inserted. Insert a playable disc. No disc is inserted. Insert a disc.
Appendix Specifications General Power requirements Refer to the main label. Power consumption Refer to the main label. Dimensions (W x H x D) 202 mm x 307 mm x 315 mm Net Weight (Approx.) 2.79 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Bus Power Supply DC 5 V 0 500 mA Inputs AUX IN 2.0 Vrms (1 kHz, 0 dB), 75 Ω, RCA jack (L, R) x 1 Tuner FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.
Appendix 23 Speaker specifications Front speaker Type 2 Way 2 Speaker Impedance 4Ω Rated Input Power 65W Max. Input power 130W Net Dimensions (W x H x D) 190 mm x 310 mm x 205 mm Net Weight 2.07 kg x 2 Design and specifications are subject to change without notice. 5 Appendix CM4230-AU.DMARLLK ENG 6460.
Appendix Maintenance Handling the Unit When shipping the unit Notes on Discs Handling Discs Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Never stick paper or tape on the disc. Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
CM4230-AU.DMARLLK ENG 6460.
CM4230-AU.DMARLLK ENG 6460.
