OWNER’S MANUAL Mini Hi-Fi System Please read this manual carefully before operating your set and retain it for future reference. MODEL CM5760 (CM5760, CMS5760F, CMS5760W) *MFL69440615* www.lg.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste.
Table of Contents Table of Contents 1 Getting Started 2 6 6 6 7 7 8 10 12 Safety Information Unique Features Playable file Requirement – Music file requirement – Compatible USB Devices – USB device requirement Remote control Front panel Rear Panel 2 Connecting 13 13 13 Connecting to speakers – Attaching the speakers to the unit – Attaching the speaker light cables to the unit – Attaching the subwoofer to the unit Optional Equipment Connection – Antenna Connection – USB Connection – AUX IN Connect
Table of Contents 34 Wireless X-Boom Plus Connection 4 Troubleshooting 35 Troubleshooting 5 Appendix 36 37 38 38 38 38 General specifications Speaker specifications Maintenance – Handling the Unit – Notes on Discs Trademarks and Licenses 5 1 2 3 4 5
Getting Started Unique Features 1 Playable file Requirement BLUETOOTH® Getting Started Listens to music stored on your Bluetooth device. Music file requirement Portable In MP3/WMA file compatibility with this unit is limited as follows. Listens to music from your portable device. (MP3, Notebook, etc.) AUTO DJ Blends the end of one song into the beginning of another for seamless playback.
Getting Started 7 Compatible USB Devices yy MP3 Player : Flash type MP3 player. yy USB Flash Drive : Devices that support USB2.0 or USB1.1. USB device requirement yy Devices which require additional program installation when you have connected it to a computer, are not supported. yy Do not extract the USB device while in operation. yy For a large capacity USB, it may take longer than a few minute to be searched. yy To prevent data loss, back up all data.
Getting Started Remote control • • • • • • • • • • • • • • a• • • • • • • • • • • • • • 1 (Standby) : Switches the unit ON or OFF. B (Open/Close) : Opens and closes the disc tray. VOL (Volume) +/- : Adjusts speaker volume. 1 Getting Started F (Function) : Selects the function and input source. (Mute) : Mutes the sound. PRESET·FOLDER W/S : -- Searches for a folder of MP3/WMA files.
Getting Started 9 • • • • • • • • • • • • • • c• • • • • • • • • • • • • • REPEAT : Listens to your tracks/files repeatedly or randomly. 0 to 9 numerical buttons : Selects numbered tracks, files, or preset number. C/V (Skip/Search) : -- Skips fast backward or forward. -- Searches for a section within a track/file. CLOCK : Sets a clock and checks a time. TUNING -/+ : Selects the radio station. Z (Stop) : -- Stops playback or recording. -- Cancels DELETE function.
Getting Started Front panel 1 Getting Started a b c i d j e k f l g m n h o p
Getting Started 11 a Display window b KEY CHANGER ( / ) Changes the key to suit your vocal range. c 1/! (Standby/On) Switches the unit ON or OFF. d I (Stop) Stops playback or recording. e AUTO DJ Selects the AUTO DJ mode. (For more information refer to page 21) f Y (Skip/Search) -- Searches backward. -- Skips to the previous track/file. -- Selects the radio stations. g LIGHTING / MIC VOLUME -- Turns on/off the lighting effects. -- Press and hold to enter microphone adjustment mode.
Getting Started Rear Panel 1 Getting Started c a d b e a SPEAKERS terminal/cord b SPEAKER LIGHTING SYSTEM (FRONT L/R) c Power cord d AUX IN (L/R) connectors e ANTENNA (FM)
Connecting 13 Connecting to speakers Attaching the subwoofer to the unit Attaching the speakers to the unit Connect a woofer cord to the player. When connecting a woofer cord to the player, insert the connector until it clicks. To connect the cable to the unit, press each plastic finger pad to open the connection terminals on the unit. Insert the wire and release the finger pad.
Connecting Optional Equipment Connection USB Connection Connect a USB device (or MP3 player, etc.) to the USB ports on the unit. Antenna Connection 2 Connect the supplied FM antenna for listening to the radio. Connecting Connect the antenna to the antenna port on the back of the unit. Be sure to extend the FM wire antenna fully. FM antenna ,,Note Removing the USB Device from the unit. 1. Choose a different function/mode or press Z on the remote control or I on the unit twice in a row. 2.
Connecting 15 AUX IN Connection PORT. IN Connection Connect an output of auxiliary device (Camcorder, TV, Player, etc) to the AUX IN(L/R) connector. Connect an output (earphone or line out) of portable device (MP3 or PMP etc.) to the PORT. IN connector. If your device has only one output for audio(mono), connect it to the left (white) audio jack on the unit. 2 Connecting PORT.IN Red White To the audio output jacks of your component (Camcorder, TV, Player, etc.
Operating Basic Operations CD/USB Operations 1. Insert the disc by pressing B on the remote control or B EJECT on the unit Or connect the USB device to the USB port. 2. Select CD or USB function by pressing F on the remote control or F / WIRELESS BOOM on the unit. ,,Note yy The display changes in the following order.
Operating 17 Other Operations Programmed Playback The program function enables you to store your favorite files from any disc or USB device. A program can contain 20 tracks/files for each media. Possible to save a total of 60 tracks/files. 1. Press PROGRAM/MEMORY on the remote control in stop status. 2. Press C/V on the remote control or Y/U on the unit to select a track/file. 3. Press PROGRAM/MEMORY on the remote control to save and select a next track/file. 5.
Operating Searching for a folder and an MP3/WMA file 1. Press PRESET·FOLDER W/S on the remote control repeatedly until a desired file appears in the display window. 2. Press d/M on the remote control or z on the unit to play it. The first file of the folder will be played. ,,Note 3 You can delete file, folder or format by pressing DELETE on the remote control. This function is supported only in stop status. (USB only) 1. - Select the file you want to delete and press DELETE on the remote control.
Operating 19 Turn off the sound temporarily Using Microphone Press 1. Connect your microphone to the MIC jack. on the remote control to mute your sound. You can mute your unit, for example, to answer the telephone, the “MUTE” will appear in the display window. To cancel it, press on the remote control again or change the volume level. DEMO In the power off state, press USB REC / DEMO on the unit once. The unit will power on and display each function in the display window.
Operating VOICE CANCELLER KEY CHANGER You can enjoy the function while playing the music, by reducing singer vocal of music in the various source. You can adjust the key to 9 steps. (4 steps higher, 4 steps lower and the original key.) Press VOICE CANCELLER and “ON” will appear in display window. To cancel it, press VOICE CANCELLER again. The quality of the VOICE CANCELLER may be different depending on the recording conditions of music files.
Operating 21 AUTO DJ playback Auto DJ blends the end of one song into the beginning of another for seamless playback. It equalizes volume across tracks for uninterrupted playback. Press AUTO DJ on the remote control or unit repeatedly, the display changes as followings. AUTO DJ RANDOM AUTO DJ OFF AUTO DJ SEQUENTIAL Display Window Description OFF AUTO DJ OFF - RANDOM AUTO DJ RANDOM The music is played randomly on this mode. REPEAT AUTO DJ SEQUENTIAL The music is played repeatedly on this mode.
Operating Using a BLUETOOTH® wireless technology About BLUETOOTH Bluetooth is wireless communication technology for short range connection. 3 The sound may be interrupted when the connection has interference from other electronic devices or you connect a Bluetooth device from a different room. Connecting individual devices under Bluetooth wireless technology does not incur any charges.
Operating 23 3. When this unit is successfully connected with your Bluetooth device, “PAIRED” appears on the display window and change to Bluetooth device name soon. Then “BT” will appear on the display window. ,,Note yy “PAIRED” will momentarily appear on the display when you connect other devices for multi pairing yy If the device name is unavailable, “_” will be displayed. 4. Listen to music. To play a music stored on your Bluetooth device, refer to your Bluetooth device’s user guide.
Operating Using the Music Flow Bluetooth App ,,Note Only Android OS is available to use “Music Flow Bluetooth” app with this unit. About “Music Flow Bluetooth” App “Music Flow Bluetooth” app brings a suite of new features to this unit. 3 Operating To enjoy more features, you are recommended to download and install free “Music Flow Bluetooth” app. Here is introduce a few of the many features of “Music Flow Bluetooth” app.
Operating 25 Activate Bluetooth with “Music Flow Bluetooth” App “Music Flow Bluetooth” app helps to connect your Bluetooth device to this unit. 1. Tap “Music Flow Bluetooth” app icon on the home screen to open “Music Flow Bluetooth” app, and go to the main menu. 2. Tap [Menu] and select the unit you want. 3. If you want to get more information to operate, tap [Help] on the [Setting] menu. ,,Note yy “Music Flow Bluetooth ” app will be available in the software version as follow; -- Android O/S : Ver 4.0.
Operating Radio Operations Be sure that FM antenna is connected. (Refer to page 14) Listening to the radio 3 Presetting the Radio Stations You can preset 50 stations for FM. Before tuning, make sure to turn down the volume. 1. Press F on the remote control or F / WIRELESS BOOM on the unit until FM appears in the display window. 1. Press F on the remote control or F / WIRELESS BOOM on the unit until FM appears in the display window. The last received station is tuned in. 2.
Operating 27 Sound adjustment Setting the surround mode This system has a number of pre-set surround sound fields. The displayed items for the equalizer may be different depending on sound sources and effects. ,,Note yy On some speakers, sound may not be heard or heard in low sound depending on the sound mode. yy By pressing and holding REGION EQ / BASS BLAST on the unit, you can enjoy bass sound effect. You can select a desired sound mode by using SOUND EFFECT on the remote control.
Operating Advanced Operations Recording to USB You can record a various sound source to USB. (CD, USB, AUX, PORTABLE, FM) 1. Connect the USB device to the unit. 2. Select a function by pressing F on the remote control or F / WIRELESS BOOM on the unit. One track/file recording - You can record to USB after playing a track/file you want. All tracks/files recording - You can record to USB after full stop status.
Operating 29 USB copying You can copy various sound source in USB1 to USB2 on USB function. 1. Connect USB device including desired sound files to USB1 and select USB1 function. 2. Connect another USB device to USB2. 3. Start the recording by pressing USB REC on the remote control or USB REC / DEMO on the unit. 4. To stop recording, press Z on the remote control or I on the unit. yy You can check the recording percentage rate for the USB record on the display window during the recording.
Operating Setting the Clock 1. Turn the unit on. 1. Turn the unit on. 2. Press and hold CLOCK on the remote control. 2. Press and hold ALARM on the remote control. 3. Select time mode by pressing C/V on the remote control. 3. Press C/V on the remote control to change the hours and minutes and press SET on the remote control to save. - AM 12:00 (for an AM and PM display) or 0:00 (for a 24 hour display) 4. Press SET on the remote control to confirm your selection. 5.
Operating 31 Sleep Timer Setting Auto power down Press SLEEP on the remote control repeatedly to select delay time between 10 and 180 minutes. After the delay time, the unit will be turned off. This unit will turn itself off to save electricity in the case were the main unit is not connected to an external device and is not used for 20 minutes.
Operating AUTO POWER On Auto function change This unit automatically turns on by an input source : LG TV or Bluetooth This unit recognizes input signals such as Bluetooth and LG TV or connected portable device, and then changes suitable function automatically. If you try to connect your Bluetooth device, this unit turns on and connect your Bluetooth device. You can play your music. ,,Note yy Depending on the connected device, this function may not operate.
Operating 33 LG Sound Sync You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with LG TV that supports LG Sound Sync. Make sure your TV has the LG Sound Sync logo. Controllable function by LG TV’s remote control : Volume up/down, mute Refer to the TV’s instruction manual for the details of LG Sound Sync. 1. Turn on the unit by pressing 1 on the remote control or 1/! on the unit. 3.
Operating Wireless X-Boom Plus Connection The output sound of (MASTER) unit is expanded to (SLAVE) unit. It is compatible with unit that supports Wireless X-Boom Plus. 3 ,,Note Operating yy If you using the LG Sound Sync, this function is not available. If you connect the LG TV function, “NOT SUPPORT” appears in the display window. yy When Wireless X-Boom Plus is disconnected, SLAVE unit is changed to BT function. yy If the connection is failed, “FAILED” appears in the display window.
Troubleshooting 35 Troubleshooting Problem The unit does not work properly. Cause & Correction yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. yy Previous setting may not be saved when device power is shut off. yy The power cord is not plugged in. Plug in the power cord.
Appendix General specifications General Power requirements Refer to the main label on the unit. Refer to the main label on the unit. Power consumption Networked standby : 0.5 W (If all network ports are activated.) Dimensions (W x H x D) Approx. 207 mm x 282 mm x 261 mm Net Weight Approx. 3.5 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Inputs Analog audio in (AUX IN) 2.5 Vrms (1 kHz, 0 dB), 75 Ω, RCA jack (L, R) Portable in (PORT. IN) 1.4 Vrms (3.
Appendix 37 Speaker specifications Front speaker Type 2 Way 2 Speaker Impedance 4Ω Rated Input Power 350 W Max. Input power 700 W Net Dimensions (W x H x D) Approx. 299 mm x 363 mm x 230 mm Net Weight Approx. 5 kg Subwoofer speaker Type 1 Way 1 Speaker Impedance 3Ω Rated Input Power 400 W Max. Input power 800 W Net Dimensions (W x H x D) Net Weight Approx. 309 mm x 363 mm x 270 mm Approx. 5.55 kg yy Design and specifications are subject to change without notice.
Appendix Maintenance Handling the Unit Handling Discs Never stick paper or tape on the disc. When shipping the unit Storing Discs Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
