ENGLISH OWNER’S MANUAL Mini Hi-Fi System Please read this manual carefully before operating your set and retain it for future reference. CM9530 (CM9530, CMS9530F/W) CM9530-FB_DKENHLK_ENG.
1 2 Getting Started Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; CM9530-FB_DKENHLK_ENG.indd 3 This device is equipped with a portable battery or accumulator. Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly.
Table of Contents Table of Contents 1 Getting Started 3 Operating 2 6 6 7 7 7 7 8 10 11 Safety Information Unique Features Accessories Playable file Requirement – MP3/WMA music file requirement – Compatible USB Devices – USB device requirement Front panel Rear panel Remote control 18 18 18 2 Connecting 23 23 12 13 14 How to Affix the Ferrite Core (Optional) Connecting to speakers – Attaching the speaker light cables to the unit – Stacking the speakers – Arrange the main unit and the speakers
Table of Contents 4 Troubleshooting 33 33 Troubleshooting – General 5 Appendix 34 35 36 37 37 37 General specifications Speakers specifications Trademarks and Licenses Maintenance – Notes on Discs – Handling the Unit 5 1 2 3 4 5 CM9530-FB_DKENHLK_ENG.
Getting Started Unique Features 1 Bluetooth® Accessories Please check and identify the supplied accessories. Getting Started Listens to music stored on your bluetooth device. Portable In Listens to music from your portable device. (MP3, Notebook, etc) Remote Control (1) Batteries (2) Rubber foot (8) FM Antenna (1) Playback effects Listens to music with various sound and playback effects. USB Direct Recording Records music to your USB device.
Getting Started Playable file Requirement MP3/WMA file compatibility with this unit is limited as follows. yy Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA) Compatible USB Devices yy MP3 Player : Flash type MP3 player. yy USB Flash Drive : Devices that support USB2.0 or USB1.1. yy The USB function of this unit does not support all USB devices.
Getting Started 8 Front panel 1 Getting Started a b h c d i e j f k g l m CM9530-FB_DKENHLK_ENG.
Getting Started a Display window Remote sensor b 1/!(Power) USB REC Records to USB. d FUNCTION Selects the function and input source. Turn FUNCTION knob clockwise or counterclockwise. e LG EQ Chooses locally special equalizer. SMART DJ Selects SMART DJ mode. (For more information refer to the 20) AUTO DJ Selects the AUTO DJ mode. (For more informaion refer to the 21) USER EQ Sets sound equalizer on your own. EFFECT LEVEL Selects DJ effect level between low, middle, and high. f DJ EFFECT Press DJ EFFECT.
Getting Started Rear panel 1 Getting Started a c d b e f a Cooling fan b Speakers connector c SPEAKER LIGHTING SYSTEM d AUX IN connectors (L/R) e ANTENNA (FM) f Power cord >>Caution yy Connect the power cord to wall outlet directly if possible. Or when you use an extension cable, it is highly recommended to use an extension cable of 110 V / 15 A or 230 V / 15 A, otherwise the unit may not operate properly because of the lack of power supply.
Getting Started • • • • • • a • • • • • • d/M (Play/Pause) : 1 (Power) : Switches the unit ON or OFF. -- Starts or pauses playback. B (Open/Close) : Opens and closes the disc tray. SOUND EFFECT : Chooses sound impressions. 1 AUTO DJ : Selects the AUTO DJ mode. (For more information refer to the 21) Getting Started Remote control PRESET.FOLDER W/S : -- Searches for a folder of MP3/ WMA files. When a CD/USB containing MP3/WMA files in several folders is being played, press PRESET.
Connecting How to Affix the Ferrite Core (Optional) You must affix a ferrite core in order to reduce or eliminate electrical interference. 2 1. Pull the stopper [a] of the ferrite core to open. Connecting 2. Wind the power cord around the ferrite core once. 3. Close the ferrite core until it clicks. CM9530-FB_DKENHLK_ENG.
Connecting Connecting to speakers Connect the speaker cable plugs to the SPEAKERS connector. Make sure to connect the speaker’s plug to the corresponding speaker connector when connecting the plug. >>Caution yy Do not try to lift the speaker alone. It needs two persons to lift the speaker. Otherwise it may result in the speaker malfunction and cause personal injury and/or property damage.
Connecting Affix the Ferrite Core (Optional) Before connecting speaker’s lighting cable, you should affix ferrite core in order to reduce or eliminate electrical interference. Attaching the speaker light cables to the unit Connect the speaker’s lighting cables on the speakers to the SPEAKER LIGHTING SYSTEM jack on the unit. 2 Connecting >>Caution yy Make sure that the jacks and the speakers are matched correctly. yy Make sure to connect the cables to connectors tightly on the unit. 1.
Connecting Stacking the speakers You can stack the speakers to save space. Refer to the below. 15 Arrange the main unit and the speakers Front speaker Before stacking You have to position the unit and the speakers before connecting the speakers. Note that the illustrations below are differ from the actual unit. 2 Main unit Connecting The following illustrations show an example of the positioning which is the left side of the main unit. Stacking the speakers 1.
Connecting Optional Equipment Connection PORT. IN Connection Connect an output (earphone or line out) of portable device (MP3 or PMP etc) to the PORT. IN connector. AUX IN Connection Connect an output of auxiliary device(Camcoder, TV, Player, etc) to the AUX IN (L/R) connector. 2 Connecting If your device has only one output for audio(mono), connect it to the left (white) audio jack on the unit. Portable cable Audio cable MP3 player etc.
Connecting USB Connection Antenna Connection Connect a USB device (or MP3 player, etc.) to the USB ports on the unit. Connect the supplied FM antenna for listening to the radio. USB device Connect the FM wire antenna to the FM antenna connector. 17 Be sure to fully extend the FM wire antenna. 2 Connecting FM antenna ,,Note Removing the USB device from the unit : 1. Choose a different function/mode or press Z ENTER on the remote control or I on the unit twice in a row. 2.
Operating ,,Note Basic Operations yy The display changes in the following order. USB MP3/WMA CD Audio CD 1. Insert the disc or connect the USB device to the USB port. REPEAT TRK REPEAT TRK REPEAT TRK REPEAT *DIR REPEAT DIR - 2. Select a source by using FUNCTION. The selected source appears on the display window.
Operating ,,Note Deleting an MP3/WMA file yy Folders or files on a CD or a USB are recognized as below. *ROOT You can delete file, folder or format by pressing DELETE. This function is supported only in stop status. (USB only) : Folder : File Folder 1 Folder3 19 1. - Select the file you want to delete and press DELETE. - Select the folder you want to delete by pressing FOLDER and rotating FILE SEARCH and press DELETE. File5 File6 - Press and hold DELETE to format the USB device.
Operating Playback effect The unit supports various sound and playback effects : SMART DJ, AUTO DJ, DJ EFFECT, and JUKE BOX playback. ,,Note yy Find sound and playback effects below. Effect Description Auto effect Auto effect blends various sound effects to fit the mood automatically. It includes flanger, phaser, delay, and chorus. Cross fade It playbacks to seamlessly fade from one song into the beginning of another. Back spin It playbacks a section of music fast in reverse.
Operating DJ effect AUTO DJ playback It allows you to enjoy DJ effect such as scratch sound and several kinds of voices yourself. Auto DJ blends the end of one song into the beginning of another for seamless playback. It equalizes volume across tracks/files for uninterrupted playback. 1. Press DJ EFFECT on the unit. The display window changes each time you press DJ EFFECT as follows : OFF -> SCRATCH -> VOICE 1 -> VOICE 2 -> VOICE 3.
Operating JUKE BOX Playback (Program play) JUKE BOX function enables you to store your favourite tracks/files from any disc or USB device. Up to 100 tracks/files can be stored for each device. Making JUKE BOX list It is supported only on stop status. 1. Press and hold JUKE BOX to enter the edit mode. 3 2. Select a track/file by pressing C/V on the remote control or by turning FILE SEARCH on the unit. 3. Press JUKE BOX to save the track/file. Operating 4.
Operating 23 Using a Bluetooth® wireless technology About Bluetooth® Bluetooth® is wireless communication technology for short range connection. The available range is within 10 meters. (The sound may be interrupted when the connection interfered by the other electronic wave or you connect the bluetooth in the other rooms.) Available Devices : Mobile phone, MP3, Laptop, PDA (This units be supported the Stereo Headset.
Operating ,,Note yy The sound may be interrupted when the connection interfered by the other electronic wave. yy You cannot control the Bluetooth device with this unit. yy Pairing is limited one Bluetooth device per one unit and multi-pairing is not supported. yy Although the distance between your Bluetooth and the set is less than 10 m, there are obstacles between both, your Bluetooth device cannot be connected.
Operating 25 Install “LG Bluetooth Remote” App through “Google Android Market (Google Play Store)” 1. Tap the “Google Android Market (Google Play Store)” icon. 2. In the search bar, type in the “LG Bluetooth Remote” and search it. 3. In the search result list, find and tap “LG Bluetooth Remote” to start downloading Bluetooth app. 4. Tap an icon for installation. 5. Tap an icon for downloading. ,,Note yy Make sure that your Bluetooth device is equipped with “Google Android Market (Google Play Store)”.
Operating Radio Operations Listening to the radio 3 Presetting the Radio Stations You can preset 50 stations for FM. Before tuning, make sure to turn down the volume. 1. Select tuner(FM) function by using FUNCTION. 1. Select tuner (FM) function by using FUNCTION. The last received station is tuned in. 2. Select a radio station you want to preset by using TUNING-/+ on the remote control. 2.
Operating 27 Other Operations Using Microphone Turn off the sound temporarily 1. Connect your microphone to the MIC jack. Press MUTE@ to mute your unit. You can mute your unit, for example, to answer the telephone, the mute icon “Q” is blinked in the display window. Displaying file information (ID3 TAG) DEMO In the power off state, it demonstrates the function on display window with a demo sound and a display by pressing SPK Lighting/DEMO. To cancel the DEMO, press it again.
Operating Sound adjustment Setting the surround mode This system has a number of pre-set surround sound fields. You can select a sound mode you want by using SOUND EFFECT on the remote control. The displayed items for the Equalizer may be different depending on sound sources and effects. 3 ,,Note yy On some speakers, sound may not be heard or heard in low sound depending on the sound mode.
Operating 29 Setting the Clock Setting the Clock Manually 1. Turn the unit on. 2. Press CLOCK on the remote control. 3. Select time format by using C/V. - 12-hour format (AM and PM display) or 24-hour format (24 hour display) 4. Press SET to confirm your selection. 5. Select the hours by using C/V. 6. Press SET. 7. Select the minutes by using C/V. Setting the Clock through “LG Bluetooth Remote” App Install “LG Bluetooth Remote” app on your Android device.
Operating Sleep Timer Setting Press SLEEP repeatedly to select delay time between 10 and 180 minutes. After the delay time, the unit will be turned off. To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press SLEEP once again while “SLEEP 10” is displayed. ,,Note yy You can check the remaining time before the unit is turned off. yy Press SLEEP. The remaining time appears in the display window.
Operating To select recording bit rate and speed 1. Press USB REC on the unit or USB REC on the remote control for longer than 3 seconds. 2. Press C/V on the remote control or Y/U on the unit to select a bit rate. 3. Press USB REC on the unit or USB REC on the remote control again to select the recording speed. 4. Press C/V on the remote control or Y/U on the unit to select a desired recording speed. (AUDIO CD only) X1 SPEED - You can listen to music while recording it. 5.
Operating ,,Note yy It is not supported to record music stored on bluetooth device. yy You can check the recording percentage rate for the USB record on the display window during the recording. (MP3/WMA, CD Only) yy During recording MP3/WMA, there is no sound. yy For stable recording, the output sound level goes down on its own when you record music from CD to USB. 3 yy You can only change volume level between MIN and 10 during recording. It will be kept even after recording.
Troubleshooting 33 Troubleshooting General Problem Cause & Solution yy The power cord is not plugged in. Plug in the power cord. No Power. No sound. yy Check whether electricity failed. Check the condition by operating other electronic devices. yy Check whether you select right function. Press FUNCTION and check the selected function. yy If not, connect speaker cables correctly. Speaker cables connected correctly. yy An unplayable disc is inserted. Check the playable disc.
Appendix General specifications General Power requirements Refer to the main label. Power consumption Refer to the main label. Dimensions (W x H x D) (285 x 398 x 357) mm Net Weight (Approx.) 8.2 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Bus Power Supply USB DC 5 V 0 500 mA Inputs Auxiliary Input 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 Microphone Input 6.3 mm jack Portable Input 1.2 Vrms (3.
Appendix 35 Speakers specifications Front speaker Type 2 Way 2 speaker Impedance 6Ω Rated Input Power 420 W Max. Input power 840 W Net Dimensions (W x H x D) (263 x 445 x 357) mm Net Weight 8.6 kg Surround speaker : Built in Subwoofer Type 2 Way 2 speaker Impedance 12 Ω Rated Input Power 210 W Max. Input power 420 W Subwoofer 1 way 1 speaker Impedance 6Ω Rated Input Power 420 W Max. Input power 840 W Net Dimensions (W x H x D) (456 x 602 x 453) mm Net Weight 20.
Appendix Trademarks and Licenses Bluetooth® wireless technology is a system which allows radio contact between electronic devices within a max. range of 10 meters. Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology. The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc.
Appendix 37 Maintenance Notes on Discs Handling Discs Never stick paper or tape on the disc. Storing Discs Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean After playing, store the disc in its case.
CM9530-FB_DKENHLK_ENG.