Owner's Manual

Operating 31
Operating
3
Advanced Operations
Recording to USB
You can record a various sound source to USB 1.
(CD, AUX, PORTABLE, Tuner, USB)
1. Connect a USB device to USB port (A) on the
unit.
2. Press FUNCTION to select a Function you want
to record.
One track/file recording - You can record to USB
after playing a track/file you want.
All tracks/files recording - You can record to USB
in full stop status.
JUKE BOX list recording - After showing the
JUKE BOX list, you can record it to USB. (Refer to
page 33)
3. Start the recording by pressing USB REC on the
remote control or
USB REC on the unit.
To stop recording, press and hold
USB
REC on the unit or USB REC on the remote
control.
Recording in MIXER ON mode
Recording is available in MIXER ON mode. If you
record in MIXER ON mode, the unit records the
mixed sound from that point when you press USB
REC.
1. Start mixing. Refer to page 22.
2. Start the recording by pressing USB REC on the
remote control or
USB REC on the unit.
To stop recording, press and hold
USB
REC on the unit or USB REC on the remote
control to stop recording. Otherwise, the
recording continues.
Pausing recording
During recording, press USB REC on the
unit or USB REC on the remote control to pause
recording. Press it again to restart recording.
(Tuner/AUX/PORTABLE and MIXER Mode only)
To select recording bit rate and
speed
1. Press and hold USB REC on the unit or
USB REC on the remote control for 3 seconds.
2. Press
C
/
V
on the remote control or
Y
/
U
on the side A of the unit to select a
bit rate.
3. Press
USB REC on the unit or USB REC on
the remote control again to set.
4. Press
C
/
V
on the remote control or
Y
/
U
on the side A of the unit to select a
desired recording speed. (AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press
USB REC on the unit or USB REC on
the remote control to finish the setting.
USB Copying
You can copy audio les in USB 2 to USB 1.
1. Connect a USB device including desired audio
files to USB port (B) and select USB 2 Function.
2. Connect another USB device to USB port (A).
3. Press
USB REC on the unit or USB REC on
the remote control.
To stop recording, press and hold
USB
REC on the unit or USB REC on the remote
control.
The making of unauthorized copies of copy-
protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal oense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights