ENGLISH OWNER’S MANUAL LED LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LED LCD MONITOR MODELS E1951S E2051S E2251S E1951T E1951C E2051T E2051C E2251T E2251C E2351T E2351TC E2251VR E2351VR E2251VQ E2351VQ www.lg.
TABLE OF CONTENTS CONTENTS ENGLISH ENG 3 ASSEMBLING AND PREPARING 21 SPECIFICATIONS 26 Preset Modes (Resolution) 3 Unpacking 27 - HDMI Video Timing 4 Parts and buttons 27 Indicator 6 Setting up the Monitor 6 - Assembling the Stand Body and Base 7 - Mounting on a table 28 PROPER POSTURE 8 - Detaching the Stand Base and the 28 Proper posture for using the Monitor.
ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card D-SUB Cable (This signal cable may be attached to this product before shipping out.) Power Cord Stand Body DVI-D Cable (In some countries, this accessory may not be provided.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator yyLighting On: Turned on yyLighting Off: Turned off (Power Button) Button ("CUSTOMIZING SETTINGS" on page 14) E1951S E2051S E2251S E2251VR E2251VQ E1951C E2051C E2251C E2351VR E2351VQ DC-IN / D-SUB 䏳㵎幑‣ HDMI DVI-D E1951T E2051T E2251T E2351T D-SUB DC-IN / 䏳㵎幑‣ E2351TC DC-IN / DVI-D D-SUB 䏳㵎幑‣ Connection panel (See p.
ASSEMBLING AND PREPARING Button 5 Description Accesses the main menus.(See p.15) Left First Button OSD LOCKED/ UNLOCKED SUPER+ RESOLUTION Use this button to enter the SUPER+ RESOLUTION menu. For more information.(See p.17) DUAL Use this button to enter the DUAL menu. For more information.(See p.18) AUTO Press the AUTO button on the MONITOR SETUP OSD menu to automatically adjust the screen.
ASSEMBLING AND PREPARING Setting up the Monitor WARNING ENGLISH ENG Assembling the Stand Body and Base 1 Place the Monitor with the screen side down on If you do not fasten the screws, the monitor yy may fall, which may result in damage to the product. a flat and cushioned surface. 4 Check the direction of the Stand Base and assemble it with the Stand Body. Using a coin, turn the screw clockwise to secure the Stand Base. 2 Attach the Stand Body from the Monitor.
ASSEMBLING AND PREPARING Mounting on a table 7 WARNING on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. When you adjust the angle, do not hold the bottom of the Monitor frame as shown on the following illustration, as it may injure your fingers. 10 cm 10 cm 10 cm 10 cm Do not touch or press the screen when adjusting the angle of the monitor. 2 Connect the AC-DC Adapter and Power Cord to a wall outlet.
ASSEMBLING AND PREPARING Using the Kensington security system ENGLISH ENG The Kensington security system connector is located at the back of the Monitor. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Detaching the Stand Base and the Stand Body 1 Place the Monitor with the screen side down on a flat and cushioned surface. Connect the Kensington security system cable between the Monitor and a table.
ASSEMBLING AND PREPARING Mounting on a wall 5 Please use a VESA standard as below. 10 cm 10 cm 784.8 mm (30.9 inch) and under yy * Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm 787.4 mm (31.0 inch) and above yy * Please use VESA standard wall mount pad and screws.
ASSEMBLING AND PREPARING CAUTION ENGLISH ENG Disconnect the power cord first before yy moving or installing the Monitor. Otherwise electric shock may occur. If you install the Monitor on a ceiling or yy slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount and yy contact a local dealer or qualified personnel. Do not over tighten the screws as this may yy cause damage to the Monitor and void your warranty.
USING THE MONITOR SET 11 USING THE MONITOR E2251VR E2351VR E2251VQ E2351VQ Your Monitor supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. HDMI DC-IN / DVI-D D-SUB 䏳㵎幑‣ D-SUB connection Transmits analog video from your PC to the Monitor. Connect the PC and the Monitor with the supplied D-sub 15 pin signal cable as shown in the following illustrations.
USING THE MONITOR SET DVI-D connection CAUTION ENGLISH ENG Transmits the digital video signal from your PC to the Monitor. Connect the PC and the Monitor set with the DVI-D cable as shown the following illustrations. E1951T E2051T E2251T E2351T E2351TC DC-IN / DVI-D D-SUB 䏳㵎幑‣ DVI OUT E2251VR E2351VR E2251VQ E2351VQ HDMI DC-IN / DVI-D DVI OUT D-SUB 䏳㵎幑‣ Connect the signal yy input cable and tighten it by turning the screws clockwise.
USING THE MONITOR SET HDMI connection 13 Self Image Setting Function Press the power button on the front panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode) E2251VR E2351VR E2251VQ E2351VQ HDMI DC-IN / DVI-D D-SUB 䏳㵎幑‣ NOTE HDMI OUT HDMI OUT NOTE When you want to use two PC in our Monitor, yy please connect the signal cable(D-SUB/ DVI-D/ HDMI) respectively in Monitor.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG Accessing The Main Menus 1 Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu. 2 Press the desired menu item. 3 Change the value of the menu item by pressing the buttons on the front of the Monitor. To return to the upper menu or set other menu items, use the up arrow ( ) button. 4 Select EXIT to leave the OSD menu. Monitor set Buttons MENU (See p.15) Sets the screen options. AUTO (See p.
CUSTOMIZING SETTINGS Customizing Settings MENU 1 Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the ◄ or ► or ▼ buttons. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.
CUSTOMIZING SETTINGS SUPER ENERGY SAVING Settings SUPER ENERGY SAVING ENGLISH ENG 1 Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu. ON 2 Press the MENU button to display the options in the OSD Menu. SUPER SAVING : 5 W/h LED SAVING : 12 W/h 3 Select SUPER ENERGY SAVING by pressing the ▼ button. OFF RESET TOTAL POWER REDUCTION: 20 W TOTAL CO2 REDUCTION: 16 g 4 Enter to SUPER ENERGY SAVING by pressing the ► button.
CUSTOMIZING SETTINGS SUPER+ RESOLUTION Settings SUPER+ RESOLUTION the MONITOR SETUP OSD menu. NORMAL 2 Press the SUPER+ RESOLUTION button to display LOW MEDIUM the options in the OSD menu. HIGH EXIT 3 Set the options by pressing ◄ or ► buttons. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. OK EXIT The available SUPER+ RESOLUTION settings are described below. Description NORMAL Select this option for everyday viewing.
CUSTOMIZING SETTINGS DUAL MONITOR Settings DUAL PACKAGE ► DUAL MONITOR ENGLISH ENG 1 Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu. 2 Press the DUAL button to display the options in the OSD menu. OFF 3 Set the options by pressing ▼ and then ◄ and ► buttons. EXTENDED CLONE 4 Select EXIT to leave the OSD menu. EXIT To return to the upper menu or set other menu items, use the up arrow ( ) button. The available DUAL MONITOR settings are described below.
TROUBLESHOOTING 19 Check the following before calling for service. No image appears Is the power cord of the display connected? yy Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? yy Press the Power button. yy If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. yy Try to turn on the PC.
TROUBLESHOOTING ENGLISH ENG Display image is incorrect The screen color is mono or abnormal. yy Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. yy Make sure the video card is properly inserted in the slot. yy Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. The screen blinks. yy Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
SPECIFICATIONS 21 E1951S E1951T E1951C Display Screen Type Sync Input Pixel Pitch Horizontal Frequency Vertical Frequency Video Input Input Form E1951S/ E1951C E1951T Signal Input E1951S/ E1951C E1951T 47.01 cm (18.51 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 47.01 cm 0.3 mm x 0.3 mm (Pixel Pitch) 30 kHz to 61 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Separate Sync.
SPECIFICATIONS E2051S E2051T ENGLISH ENG Display Sync Input E2051C Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency Input Form E2051S/ E2051C 50.805 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 50.805 cm 0.2766 mm x 0.2766 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. E2051T Separate Sync.
SPECIFICATIONS E2251S E2251T Sync Input Video Input E2251C Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency Input Form E2251S/ E2251C E2251T Signal Input E2251S/ E2251C E2251T 54.686 cm (21.53 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating. Visible diagonal size: 54.686 cm 0.248 mm x 0.248 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Separate Sync.
SPECIFICATIONS E2251VR E2251VQ ENGLISH ENG Display Sync Input Video Input Resolution Plug & Play Power Consumption Power Input Screen Type 54.686 cm (21.53 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating. Visible diagonal size: 54.686 cm Pixel Pitch 0.248 mm x 0.248 mm (Pixel Pitch) Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56 Hz to 75 Hz (D-SUB, DVI-D) 56 Hz to 61 Hz (HDMI) Input Form Separate Sync. Digital.
SPECIFICATIONS E2351T 25 E2351TC E2351VR E2351VQ Sync Input Video Input Resolution Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency E2351T/ E2351TC E2351VR/ E2351VQ Input Form E2351T/ E2351TC E2351VR/ E2351VQ Signal Input E2351T/ E2351TC E2351VR/ E2351VQ Input Form E2351T/ E2351TC E2351VR/ E2351VQ Max E2351T/ E2351TC E2351VR/ E2351VQ Plug & Play Recommend E2351T/ E2351TC 58.42 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58.42 cm 0.
SPECIFICATIONS Preset Modes (Resolution) ENGLISH ENG E1951S/ E1951T/ E1951C Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) 720 x 400 31.468 70.08 640 x 480 31.469 59.94 640 x 480 37.500 75 800 x 600 37.879 60.317 800 x 600 46.875 75 832 x 624 49.725 74.55 1024 x 768 48.363 60 1024 x 768 60.023 75.029 1366 x 768 47.712 59.790 Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) 720 x 400 31.468 70.08 640 x 480 31.
SPECIFICATIONS 27 HDMI Video Timing Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) 480P 31.50 60 576P 31.25 50 720P 37.50 50 720P 45.00 60 1080i 28.12 50 1080i 33.75 60 1080P 56.25 50 1080P 67.
PROPER POSTURE ENGLISH ENG PROPER POSTURE Proper posture for using the Monitor. Adjust the Monitor and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor to avoid it reflecting light.
LICENSES 29 LICENSES HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ENG ENGLISH Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
