User guide

Rotisserie

Installation & Cooking

Insert the shaft of right

plate into the shaft of

motor.

Put the shaft of left plate on the

holder of rotisserie.

Press START.

After cooking hold the rotisserie bar of both side with the handle and lift up

the left end lightly and pull out from the right end.

NOTE:

1. The rotisserie cooking is convenient for grilling of meat and poultry.

All the surface of the food will become even brown without overturning.

2. The rotisserie cooking can be used in Grill mode, Convection mode and

Speed Auto Cook mode.

3. The rotisserie bar is used for rotisserie cooking only. After rotisserie cooking

is finished remove the rotisserie bar and store with other accessories.

CAUTION

1. DO NOT USE THE ROTISSERIE WITH NO LOAD, IT WILL DAMAGE THE OVEN.

2. AFTER COOKING, THE METAL TRAY WILL BECOME EXTREMELY HOT.

3. It is recommended to remove the grease from the turntable every time before

cooking. Hot grease on the turntable may cause smoke.

To Clean ROTISSERIE &

METAL TRAY

When cooking is completed,

separate the ROTISSERIE from

the food. Take care when

handling ROTISSERIE, metal

tray and food stuff as it is very

hot. During cooking it is normal

for the ROTISSERIE & metal tray

to be stained from the food.

Simply clean the ROTISSERIE &

metal tray with a warm soapy

water and a soft cloth. If the

ROTISSERIE & metal tray

remain stained after washing,

soak utensils in hot soapy water

for a few minutes.

Do not use metal scouring

pads. They will scratch the

surface .

HANDLE