Owner's Manual

E-6
Front View
1.
Headphone
Jack
Standard
1/8
(3.5mm)
stereo
jack
for
listening
to the audio
signal
from audio
CDs.
2.
Headphone
Volume Control
Adjusts
the
headphone
sound level.
3. Disc Drawer
Accepts
a CD -ROM disc on its
tray.
4.
Busy
Indicator
The
Busy
Indicator
lights during
initialization and data-read
operations.
5.
Emergency Eject
Hole
Insert a
paper clip
here to
eject
the drawer
manually
or when there is no
power.
6.
Play/Skip
Button
When an Audio CD is in the Disc
Drawer,
pressing
this button will start
playing
audio CDs from the first track. If an audio CD is
playing
,
pressing
this
button will
skip
to the next track.
7.
Open/Close/Stop
Button
This button is
pressed
to
open
or close the CD
tray
.
If an audio CD is
playing
,
pressing
this button will
stop
it,
and
pressing
it
again
will
open
the
tray.
Back View
1.
Digital
Audio
Output
Connector
This is a
digital
audio
output
or Video CD
output
connector.
You can connect this to a
digital
audio
system
or a Video CD Board.
2.
Analog
Audio
Output
Connector
The Audio
Output
Connector connects to a sound card.
3.
Master/Slave/CSEL
Jumper
These three
jumpers
are used to set the CD -ROM Drive to either a
Master,
Slave,
or CSEL device.
4. Interface Connector
This
40-pin
connector is used to transfer data and control
signals
between the
C D -ROM Drive and
your
PC.
5. P ower-in Connector
Attach a
power
cable from the
computer
to this connector.