Owner's Manual

E-6
Front View
1.
Headphone
Jack
Standard 1/8"
(3.5mm)
stereo
jack
for
listening
to the audio
signal
from audio CDs.
2.
Headphone
Volume
Control
Adjusts
the
headphone
sound level.
3. Disc Drawer
Accepts
a CD-ROM disc on its
tray.
4.
Busy
Indicator
The
Busy
Indicator
lights during
initialization and data-read
operations.
5.
Emergency Eject
Hole
Insert a
paper clip
here to
eject
the drawer
manually
or when there is no
power.
6.
Play/Skip
Button
When an Audio CD is in the Disc
Drawer,
pressing
this button will start
playing
audio CDs from the first track. If an audio CD is
playing, pressing
this
button will
skip
to the next track.
7.
Open/Close/Stop
Button
This button is
pressed
to
open
or close the CD
tray.
If an audio CD is
playing, pressing
this button will
stop
it,
and
pressing
it
again
will
open
the
tray.
Back View
1.
Digital
Audio
Output
Connector
This is a
digital
audio
output
or Video CD
output
connector.
You can connect this to a
digital
audio
system
or a Video CD Board.
2.
Analog
Audio
Output
Connector
The Audio
Output
Connector connects to a sound card.
3.
Master/Slave/CSEL
Jumper
These three
jumpers
are used to set the CD-ROM Drive to either a
Master,
Slave,
or CSEL device.
4.
Interface Connector
This
40-pin
connector is used to transfer data and control
signals
between the CD-
ROM Drive and
your
PC.
5. Power-in
Connector
Attach a
power
cable from the
computer
to this connector.