Owner's Manual

E-7
Installing
the Drive
Before
installing
the
drive,
turn off the
system power.
Follow the
steps
below to
install the CD-ROM drive:
1. Remove the cover from
your computer system.
Refer to manual for the
computer
for details about
removing
the cover.
2. Insert the CD-ROM drive unit into a free 5.25-inch drive
bay.
Secure the
CD-ROM drive to the drive
bay
rails with the
mounting
screws
(supplied).
3. Connect the
4-pin power
cable and
40-pin
IDE interface cable to the back of
the CD-ROM drive.
Notes:
If there is no
spare power
cable available in the
computer, you
will have
to
purchase
a
splitter
cable of a suitable
type.
The red
edge
of the IDE cable
corresponds
to
pin
1 of the IDE interface on the
CD-ROM drive.
Please
Note:
an IDE cable is not
supplied
and
may
be
required
to be
purchased
separately.
If the
computer
is
using
a sound
card,
the drive is connected to the sound card
with an audio cable. This CD-ROM drive is
supplied
with a Creative Labs
SoundBlasterⓒ
compatible
audio
lead,
if this is not suitable for
your
sound
card,
it
maybe necessary
for
you
to
purchase
a suitable lead from
your
retailer. Refer
to the manual for the sound card for detailed information
regarding
connection.
DIGITAL
AUDIO
DGGLCSM39
12
40
SLA
R
+5
+12
GND
AUDIO
ANALOG
INTERFACE
POWER
Audio Cable
IDE cable
Red
Strip
Power Cable