LG Prior to installation, this airconditioning unit must be submitted for approval by the utility service which provides electricity (EN 61000-2, EN 61000-3 Norm). MODELS: CRNN-SP Series Type: Art Cool IMPORTANT ? ? Please read this owner's manual and before air conditioner. installing and carefully operating your room thoroughly Please retain this owner's manual for future reference after reading it thoroughly.
FOR YOUR RECORDS Safety Precautions .................3 Prior to Operation ..................8 Operating Instructions...........9 Prearation before Write the model and serial numbers here: Model # Serial # You find them can on a label Staple your receipt to this purchase page in the event you need to prove date of use the or to issue warranty. on the system ..........................10 How to the side of each unit. Date Purchased operation...............................
Safety Precautions Safety To prevent injury Precautions to the user or other people and property damage, the following instructions must be followed. Incorrect by operation due to ignoring following indications. the instruction will cause harm or damage. The seriousness is classified WARNING This symbol indicates the possibility of death or serious CAUTION This symbol indicates the possibility of or damage to properties only.
Safety Precautions Do not modify or Do not extend the power cable. ? install, remove, Be cautious when or unpacking and installing product. re-install the unit by yourself (customer). There is risk of fire or electric ? shock. the There is risk of fire, electric shock, explosion, or injury. ? Sharp edges could cause injury.
Safety Do not allow water to Do not store run into electric parts. gas or or use flammable combustibles near Do not It may There is risk of cause fire, failure of the product, ? There is risk of fire or the in product tightly closed space for long time. the product. ? use Precautions failure of ? Oxygen deficiency could a a occur. product. or ENGLISH electric shock.
Safety Precautions When the product is not be used for time, disconnect the power turn off the breaker. There is risk of ? unintended Take long supply plug or product damage operation. or a failure, ? or care on or to ensure that nobody could step fall onto the outdoor unit. This could result in personal injury and product damage. CAUTION Installation Always check for gas (refrigerant) leakage after installation or repair of product.
Safety Do not block the inlet Use or outlet of air flow. a not soft cloth to clean. Do use harsh solvents, ? It may cause product failure. ? Do not step on or ? detergents, and failure of personal injury product. ? There is risk of fire, electric shock, or damage to the plastic parts of the product. more A ? efficiency filter reduces the product damage. Do not drink the water Use drained from the when product. a malfunction firm stool There is risk of personal injury.
Prior to operation Prior to Preparing 1. Contact 2. Use a for installation an Operation operation specialist for installation. dedicated circuit. Usage 1. Being exposed to direct airflow for an Do not expose occupants, pets, plants to 2. Due to the other possibility of heating devices. 3. Do not use oxygen or deficiency, this air conditioner for devices, food, pets, plants, and extended period of time could be hazardous to your health. periods of time.
Operating Instructions Operating Preparation Instructions before operation How to Insert the Batteries 1. Remove the battery it by pulling cover to the according ENGLISH arrow direction. 2. Insert are new batteries installed 3. Reattach the making correctly. by sliding cover Use 2 NOTICE sure that the it back into (+) and (-) of battery position. AAA(1.5volt) batteries. use rechargeable batteries.
Operating Instructions About the remote controller The remote controller transmits the signals to the on the system system. Features of the Remote controller- Door Opened 1. START/STOP BUTTON Operation starts when this button is pressed and stops when the button is pressed again. Signal transmitter 2. OPERATION MODE SELECTION BUTTON Used to select the operation mode. 3. ROOM TEMPERATURE SETTING BUTTONS Used to select the room temperature. 4.
Operating How to use the Operation Instructions Mode Selection Button Cooling Operation Press the 1 ENGLISH Start/Stop button. respond with The unit will a 2 beep. Open the door on the remote controller. To select Cooling Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the Auto Cooling 3 on lower than the room a Healthy Dehumidification Close the door set within arrow.
Operating Instructions Auto Operation 1 Press the a 2 Start/Stop button. respond with The unit will beep. Open the door on the remote controller. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the Auto Cooling 3 The arrow. Healthy Heating Dehumidification temperature and fan speed electronic controls based on are automatically the actual room set by the temperature.
Operating Healthy Dehumidification Press the 1 Instructions Operation ENGLISH Start/Stop button. respond with The unit will a beep. Open 2 the door the remote controller. To select on Dehumidification Operation, press the Healthy Operation Mode Selection button. Each time the button is pressed, shifted in the direction of the Auto Cooling the operation mode is arrow.
Operating Instructions Heating Operation 1 Press the a 2 Start/Stop button. respond with The unit will beep. Open the door on Operation, press the remote controller. To select the Each time the button Heating Operation Mode Selection button. is pressed, the operation mode is shifted in the direction of the Auto Cooling 3 arrow. Healthy Dehumidification Close the door on Heating the remote controller. Set the temperature higher than the room temperature.
Operating Jet Cool Instructions Operation 1 Press the a 2 beep. Press the Jet Cool button to the will on 3 ENGLISH Start/Stop button. respond with The unit will speed cooling operate mode and the unit operate in super high fan speed cooling mode for 30 minutes. To cancel the Jet Cool mode, press the Jet Cool button or room temperature setting button again and the unit will operate in high fan speed on cooling the fan button speed or the mode.
Instructions Operating Additional features Mode Sleep 1. Press the Sleep To cancel the Sleep Mode, press the sleep Mode Auto button several times until the star Mode Auto button to set the time you want the unit to turn off automatically. ( programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 ) disappears from the operation display. 2. The Timer is NOTICE The Sleep Mode will be operated speed (cooling) or medium fan speed (heat pump only) for quiet sleeping.
Operating Instructions Vertical Airflow Direction Control The up/down airflow (Vertical Airflow) can adjusted by using the remote controller. be 2. Press Chaos Swing button and the louvers will up and down. Press the Chaos Swing button again to set the vertical louver at the swing ENGLISH desired airflow direction.
Operating Instructions Forced Operation when the remote Operation procedures controller can't be used. The operation will pressed. be started if the power button is If you want to button. stop operation, re-press the Room Operating Indoor FAN mode Temp. 21°C ≤ Room Healthy Temp. 24°C < Room Dehumidification High Temp.
Maintenance and Service Maintenance and Service CAUTION: Before performing any maintenance, turn off the main power to the system. ENGLISH Grille, Case, and Remote Controller Turn the system off before cleaning. To clean, wipe with a soft, dry cloth. Do not use bleach abrasives. or Power NOTICE before supply must be disconnected cleaning the indoor unit. 1.
Maintenance and Service When the air conditioner is not going to be used for a When air conditioner is not used for a going to be When the air conditioner is used long time. Operate the air conditioner circulation mode on This will again. Clean the air filter and install it in the Air (Refer to page 17) for indoor unit. 2 to 3 hours. ? long time. (Refer to page 19 for cleaning filters.) out the internal mechanisms.
Maintenance and Service Before you call for service... Troubleshooting Tips! Save ? Check the please before following points requesting repairs ? operate. ? a persists, See page peculiar ? odor. 16 Have you made a mistake in timer operation? Has the fuse blown or has the circuit breaker been has service.... If the malfunction Explanation The air conditioner does not room or money! contact your dealer.
