Colour Monitor USER GUIDE BENUTZERHANDBUCH MANUEL D'UTILISATION GUIDA UTENTE GUIA DEL USUARIO MODEL : CS788T
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
DECLARATION OF CONFORMITY LG Electronics Inc. 184 Kongdan-dong, Kumi-city Kyoungbuk, Korea We declare under The model sole our name responsibility of color monitor : or product CS788T to which this declaration relates is in standard that the conformity with the following other normative documents: EN 50082-1/1992, EN 55022/1987, EN 60555-2 and 3/1987 of the EMC Directives 92/31/EEC and 93/68/EEC.
Table of Contents Introduction ..................................................................................................1 Monitor Registration Notice.............................................................................................................2 Trademark Acknowledgments .......................................................................2 Important Precautions On Safety.......................................................................................................
Introduction Thank you for purchasing a color monitor. This monitor supports OSD, DDC1, DDC2B and DDC2AB. It will give you high resolution performance and operation in a variety of video operating modes. It is compatible with standard PC type personal computers. The 17-inch (15.9 inches viewable) flat Square Tube design is excellent for use in a Windows or desktop publishing environment, where smaller screen sizes result in images difficult to see easily. The anti-glare treatment is easy on the eyes.
Monitor Registration The model and serial numbers These numbers You as a are found on the rear of this unit. unique to this unit and not available to others. should record requested information here and retain this guide permanent record of your purchase. Staple your receipt here. are Date of Purchase : Dealer Purchased From : Dealer Address : Dealer Phone No. : Model No. : Serial No. : Notice All rights reserved.
Important This unit has Precautions been engineered and manufactured to assure your improper use can result in potential electrical shock or fire hazard. In order not to defeat the safeguards incorporated in this monitor, observe the following basic rules for its installation, use, and servicing. Also follow all warnings and instructions marked directly on your monitor. personal safety, On but Safety 1. Use only the power cord supplied with the unit.
Keep children from monitor's cabinet dropping or pushing objects into the openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this monitor. During a lightning unattended for an storm or when the monitor is to be left extended period of time, it from the wall unplug outlet. Do not the bring magnetic picture tube. devices such as magnets or motors near On Installation 1. Do not allow do not place 2.
Installation supply voltage is marked on the ID label located on the rear panel of the monitor. If your local voltage is different, do not use the monitor and contact your supplier before using the display. The Connections To connect your monitor after the video 1. Turn OFF the power to your get 3. Connect the board 4. on panel signal your PC is properly installed: computer and all its attached options. 2.
Location and Function of Controls Front View Power ON/OFF Enter Button Degauss button Power Indicator Rear View ID Label AC Power Socket D-Sub 6 Signal Cable
Control Panel Function Power Indicator Degauss Power ON/OFF button Enter Button Power ON/OFF Enter button This button is used to turn the monitor ON and OFF. Power Indicator This Indicator lights up green when the monitor operates normally. If the monitor is in DPM (Energy Saving) mode (stand-by/suspend/ power off), this indicator color changes to amber. Degauss button This button is used to image and color.
On Screen You item were using Display(OSD) introduced to the the OSD system. Listed below items that Selection and are are OSD procedure Adjustment of selection and the icons, icon names, and icon on the Menu. adjusting descriptions an of the shown Adjust Description Contrast Control Adjust the display to the contrast desired. CONTRAST 100% ADJ: SELECT: Brightness Control Used to adjust the brightness of the screen.
OSD Adjust Description Vertical Size To V adjust image height. Decreases the size of the SIZE 85% Increases the size of the screen image. ADJ: SELECT: screen image. Side Pincushion To correct the bowing in and out of the image. SIDE PINCUSHION Curves the 85% Curves the image's edges image's edges inwards. outwards.
OSD Adjust Description Moire Reduction MOIRE REDUCTION This item allows you to reduce the moire. It is normally OFF. ON OFF NOTE:The screen image may shake moire reduction function is ON. OSD ADJ: SELECT: slightly while the Switching the OFF will improve image stability and clarity at the slightly greater MOIRE expense of moire. REDUCTION H 50% V 50% OSD ADJ: SELECT: Color Select To select color temperature, 9300 K/ 6550 K and USER.
OSD Adjust Description Recall If the monitor is YES ADJ: SELECT: Language in a factory this control has no effect. Select To choose the language in which the displayed. OSD Menus are available in five language English, German, French, Spanish and control LANGUAGE DEUTSCH ESPANOL FRANCAIS operating preset mode, this control will reset the image to the factory preset mode. If the monitor is operating in a user mode, RECALL ITALIANO SELECT: ADJ: names are : Italian.
Power Management System This monitor incorporates new circuitry for lowering energy usage idle time, following the Display Power Management Signalling during (DPMS) guide lines of the Video Electronics Standards Association (VESA), and is certified as exceeding the EPA's Energy Star program for reduced power usage. For the power savings feature to operate, the monitor must be used with either a PC having power saving circuitry.
Video Memory Modes This multi-synchronous auto-scanning monitor can automatically detect and display several video modes falling within the monitor's scanning range of 30-70kHz Horizontal and 50-160Hz Vertical. In the PC area, this relates to a maximum flicker-free usable resolution of 1280x1024 at a non-interlaced refresh rate of 60Hz Vertical. For convenience, the monitor has a 45 mode memory, of which 7 modes come from the factory preset to popular video modes as described below.
A note about the video memory modes: There is a total of 45 video memory modes, generally more modes than you will use at any one time. Of these 45 modes, 7 are permanent, factory fixed modes that cannot be changed, and another 7 are set at the but may be overwritten to make more room. The remaining 31 left blank (empty).
Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range.
Why LGE'S Ultra-Contrast? 1. We adopted 43.5% Dark Tint Glass to contrast: improve Dark Tint Glass increases contrast. Transmission 2. We depends contrast without highly up-graded Sputtering coating the thickness of on with glass. brightness impairment: dielectric structure 6-layers the Anti- give Reflection effect, Anti-Static effect. 3. The lowest Reflectivity gives the best contrast.
Troubleshooting Symptom: Possible The Self causes: signal Symptom: Possible diagnostics message. cable is not connected. OUT OF FREQUENCY message appears. causes: The frequency of the sync input operating range of the monitor. HF:120.8kHZ VF:110.1HZ OPERATING is outside the FREQUENCY HF:30-70kHZ *Vertical Use the (Refer graphics board's to the manual for Symptom: Possible Frequency: 30kHz-70kHz Frequency: 50Hz-160Hz *Horizontal VF:50-160HZ utility software to change graphics board).
Service 1. Unplug qualified the monitor from the wall outlet and refer service personnel The power cord Liquid has been when servicing to : plug is damaged or frayed. spilled into the monitor. The monitor has been exposed to rain or water. The monitor does not operate normally following the operating instructions. Adjust only those controls that are covered in the operating instructions.
Input Specifications Specifications Sync signal types H. sync V.sync H. sync V. sync H/V sync N.C Type Video Separate Sync Composite Sync (N.C D P M connection) : no Power (Display MODE Management) Power LED Color H.sync V.
Specifications Picture tube 17 inch (15.9 inches Darkface, 0.28 mm viewable) FST, Non-glare, 90 degree deflection, pitch, Ultra Contrast CDT dot Sync Input Horizontal Freq. : 30kHz 70kHz (Automatic) : 50Hz Vertical Freq. 160Hz (Automatic) : Separate, Composite, TTL, Positive/Negative Input Form : 15 pin D-Sub connector Signal input - - Video Input Display Area Input Form : 12.2" : Separate, Resolution : 1280 Power Consumption: x x 9.1" / 310 RGB x 230mm Analog, 0.
