Thank you for purchasing a high resolution monitor. It will give you high resolution performance and convenient reliable operation in a variety of video operating modes. Features The monitor is 19 inches (18.0 inches viewable ) intelligent, microprocessor compatible with most analog RGB (Red, Green, Blue) display standards, including IBM PC , PS/2 , Apple , Macintosh , Centris , Quadra , and Macintosh II family.
Connecting the Monitor On the back of the monitor power 1 2 cord, are plug-in connections; one for the AC signal cable from the video card. two and the other for the Power off both the monitor and PC. Connect the 15 pin VGA connector of the supplied signal cable to the output on the PC. The connectors will mate only one way. If VGA video connector you cannot attach the cable easily, turn the connector upside down and try again. When mated, tighten the thumbscrews to secure the connection.
Location and Function of Controls Front View Front Panel Controls Rear View ID Label D-Sub AC Power Socket A3 Signal Connector
Control Panel Function Front Panel Controls Power Button (DPMS) Indicator Power Button Button Contrast Brightness Buttons Control Function Button Use this button to enter or exit the on screen display. Buttons Use these buttons to choose the Button on screen Use this button to enter adjust items in a selection in the on display. screen Brightness Used to Contrast Adjust Power (DPMS) Indicator This Indicator adjust the the display brightness of the screen.
On Screen Display (OSD) Control Adjustment Making adjustments to the image size, position and operating parameters of the monitor are quick and easy with the On Screen Display Control system. A quick example is given below to familiarize you with the use of the controls. Following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen You were Display(OSD) introduced to the Selection and Adjustment procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the Menu. OSD Adjust Description H POSITION To 43.2kHz/85Hz H move POSITION 50 picture image Moves the screen Moves the screen left and right. image left. image right. U H SIZE To 43.2kHz/85Hz H adjust image width.
On Screen Display(OSD) OSD Selection and Adjust Adjustment Description TRAPEZOID 43.2kHz/85Hz To correct TRAPEZOID geometric Makes the 50 at the the screen image narrower screen image wider at top. Moves the U distortion. top. PIN BALANCE To correct the balance of both sides 43.2kHz/85Hz PIN BALANCE bowing. 50 Curvature of the sides to the right. Curvature of the sides to the left. U PARALLELOGRAM This control 43.2kHz/85Hz PARALLELOGRAM the screen adjusts image.
On Screen Display(OSD) OSD Selection and Adjust Adjustment Description H CONVERGENCE This item allows you to adjust the horizontal convergence. 43.2kHz/85Hz H CONVERGENCE The horizontal convergence control adjust the alignment of the red and 50 blue horizontal fields. U COLOR ? 9300 : To appear the display's color temperature. Slightly ? 6500 : To appear the display's color temperature. K : 43.2kHz/85Hz COLOR bluish white. Slightly reddish white.
On Screen Display(OSD) OSD Selection and Adjust Adjustment Description LANGUAGE 43.2kHz/85Hz To choose the LANGUAGE control language in which displayed. the names are OSD Menus available in 8 are languages : English, German, French, Spanish, Italian, Svenska, Suomi and Portugues. U 43.2kHz/85Hz LANGUAGE ENGLISH DEUTSCH AIS FRANC ESPAN OL ITALIANO VIDEO LEVEL This item is used to select the 43.2Hz/85Hz VIDEO LEVEL monitor's 0.7V input signal level.
The monitor has 30 memory locations for factory preset to popular video modes. Preset Modes 1 2345 VESA display modes, 5 of which are (Resolution) 640 x 480 43.269 85 VESA 800 x 600 VESA 1024 x 53.674 85 768 68.677 85 VESA 1280 x 1024 91.146 85 VESA 1600 x 1200 93.750 75 User Modes Modes 6-30 are empty and can accept new video data.
Check the following before calling for service. SELF DIAGNOSTICS message. The signal cable is not connected, or is loose. Check and secure the connection. OUT OF FREQUENCY message appears. The frequency of the signal from the video card is outside the operating range of the monitor. * Horizontal * Vertical Use the Frequency : 30-96kHz Frequency : 50-160Hz graphics board's utility software graphics board).
Specifications Picture Tube 19 inch (18.0 inches viewable) FST 90 degree deflection 0.26mm dot pitch ARAS(Anti-Reflective Anti-Static) coating, U-coating Horizontal Sync Input Vertical Freq. 50 Freq. Input Form Video Input 30 96kHz (Automatic) - 160Hz (Automatic) - Signal Input Separate TTL, Positive/Negative Composite TTL, Positive/Negative SOG (Sync On Green) 15 pin D-Sub Connector Input Form Separate, RGB Analog, 0.7Vp-p/75 ohm, Resolution(max) 1600 x Power Normal(Max.