Owner's Manual

Check the
following
before
calling
for service.
SELF DIAGNOSTICS
message.
The
signal
cable is not
connected,
or is loose. Check and secure the connection.
OUT OF FREQUENCY
message appears.
The
frequency
of the
signal
from the video card is outside the
operating range
of
the monitor.
*
Horizontal
Frequency
:
30-96kHz
*
Vertical
Frequency
:
50-160Hz
Use the
graphics
board's
utility
software to
change
the
frequency setting
(Refer
to the manual for
graphics
board).
The
power
LED
is illuminated amber.
Display power management
mode.
There is no active
signal coming
from the PC.
The
signal
cable is not fastened
securely.
Check the
computer power
and
graphics adapter configuration.
The
image
on the SCREEN is not
centered,
or too
small,
or not a
rectangle shape.
Image adjustment
not been done
yet
in
the current
operating
mode. Use the
,
and buttons to set the
image
to
your liking.
The monitor doesn't enter the
power saving
off mode
(Amber).
Computer
video
signal
is not VESA DPMS standard. Either the PC or the video
controller card is not
using
the VESA DPMS
power management
function.