OWNER'S MANUAL OWNER’S MANUAL DISHWASHER WASHING MACHINE Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the dishwasher is installed Please read this manual carefully before near operating correctly and safely. Leave these instructions the dishwasher your set and retain it for future reference. after installation for future reference.
CONTENTS CONTENTS.................................2 Thank you for buying a LG Dishwasher. IMPORTANT SAFETY INSTRUCTIONS Please read your owner’s manual carefully, it provides instruction on safe installation, use and maintenance. Retain it for future reference. Important safety instructions............... 3 Read all instructions before use......... 4 Save these instructions....................... 5 INSTALLATION INSTRUCTIONS Prepare cupboard opening.................
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. Your Safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol.
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before use WARNING To reduce the risk of fire, electric shock, or injury to persons when using the dishwasher, follow basic precautions, including the following: • Please read this manual carefully before using the dishwasher for the first time. • This manual contains very important notes regarding the installation, use and maintenance of your dishwasher.
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before use WARNING To reduce the risk of fire, electric shock, or injury to persons when using the dishwasher, follow basic precautions, including the following: • Do not use any kinds of solvent in your dishwasher. They may cause an explosion or fire. • Do not spray water on the appliance. It may cause the failure of electric parts or electric shock. • Do not push down or sit on the inner door when the door is opened.
IMPORTANT SAFETY INSTRUCTIONS WARNING Improper connection of the equipment-grounding conductor can result in electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician. Disposal of your old appliance 1.
INSTALLATION INSTRUCTIONS WARNING ••A qualified electrician/plumber or competent person should carry out any electrical/ plumbing work required to install this appliance. Prepare cupboard opening Preparation for electrical wiring CAUTION 1. This dishwasher is designed to fit the size shown as below. ••For personal safety, remove house fuse or open circuit breaker before installation. ••Do not use an extension cord or adapter plug with this appliance.
INSTALLATION INSTRUCTIONS I nstalling the dishwasher in cupboard reparing the dishwasher for P installation 1. Lay the dishwasher on its back. 1. Before sliding the dishwasher into the cupboard opening, all necessary height and balancing adjustments should be made using a spanner. 2. Adjust the legs to the required height as shown in below figure. 2. Slide the dishwasher into the cabinet, opening carefully. Make sure that the drain hose inside the cabinet is not kinked or stretched.
INSTALLATION INSTRUCTIONS Installation of drain hose 1. If the end of drain hose does not fit to the drain line, use a rubber connector(not supplied) that is resistant to heat and detergent. hen the drain hose is connected to a W separate standpipe, it is essential that an airtight connection be made. Refer to Fig.B 2. This should be available from a plumbing shop or DIY merchants. 3. There are two typical connections as shown in Figure A, B.
INSTALLATION INSTRUCTIONS Installation of water inlet hose How to level the dishwasher After installing the dishwasher, you may notice a slight sticking of the door to the dishwasher, when you open or close the door. If this does happen you need to adjust the level of the dishwasher. Connect the water supply hose to the water tap. (Fig. A) Some models consist of an inlet valve and hose. (Fig.
PARTS NAME 11. Upper Rack 12. Cutlery Basket 13. Detergent And Rinse Aid Dispenser 14. Vapor Vent Cover 15. Upper Spray Arm 16. Lower Spray Arm 17. Filter ASM 18. Lower Rack 19. Salt Container Cap 1. Control Panel 2. Door Handle 3. Front Cover 4. Lower Cover 5. Display Window 6. Power Button 7. Drain Hose 8. Inlet Hose 9. Power Cord 10. Adjustable Leg Accessory Funnel ※ The appearance and specifications may vary without notice. 11 1. MFL66281485_EN_131210.indd 11 2013.12.
FUNCTION OF CONTROL BUTTON ■ MODEL : D1451W(L,M,T,B,C,D,A,S)F(B,U) D1452W(L,M,T,B,C,D,A,S)F(B,U) D1417WFB ① ■ MODEL : D1462W(L,M,T,B,C,D,A,S)F(B,U) ① 12 1. MFL66281485_EN_131210.indd 12 2013.12.
③ ④ ⑤ ⑥ ⑨ ② ⑧ ⑩ ⑪ ⑦ SMARTDIAGNOSIS™ function is available only for the products with a SMARTDIAGNOSIS™ mark. (Refer to Page 31.) ③ ④ ⑤ ⑥ ⑨ ② ⑫ ⑧ ⑩ ⑪ ⑦ 13 1. MFL66281485_EN_131210.indd 13 2013.12.
FUNCTION OF CONTROL BUTTON ① Process Indicator • Indicates current program phase. • The Wash, Rinse and Dry lamps twinkle while each phase of washing process. • The Clean lamp turns on after all procedure is ended for 4minutes. ② Salt & Rinse Refill Indicator • Salt : Refill with special salt when the lamp turns on. • Rinse : Refill with rinse aid when the lamp turns on. ③ Half Load • In case of small load, use upper or lower rack only to save energy.
BEFORE USING FOR THE FIRST TIME Hardness setting ※ You have to check your water hardness and set the softening system level before operating your dishwasher. < Water hardness level > Step 1. Check and find water hardness level ■ Method 1 1) Check the water hardness in your area. (Your water utility company can help you with this.) 2) Set the softening system level of your dishwasher according to the water hardness level. Refer to Step 2.
BEFORE USING FOR THE FIRST TIME Step 3. Salt Filling This model has a water softener to soften hard water. Please read these notes carefully for correct operation. In order to provide satisfactory rinsing results, the dishwasher requires soft water, i.e., containing little or no lime, otherwise water stains will be left behind on the dishes and interior containers. If the tap water exceeds a certain level of hardness, it must be softened, I.e.,decalcified.
INFORMATION FOR ENERGY TEST(EN50242) 2. Upper Rack ■ Appliance loaded in accordance with standard specifications. • Capacity : 14 place settings • Standard course : Eco • Rinse Aid setting : 4 • Reference cleaner : 35g of detergent onto the inside surface of the door. • Height-adjustable Rack-U must be inserted into the uppermost position. • It is the most efficient programme in terms of its combined energy and water consumption for that type of tableware.
HOW TO USE AND OPERATE Daily use load 2. Upper Rack 1. Cutlery Basket 3. Lower Rack CAUTION ••Do not use the pot and pan with plastic handle. ••Poor washing for smudges of waterproof or long lasting lipsticks on the glass. 18 1. MFL66281485_EN_131210.indd 18 2013.12.
HOW TO USE AND OPERATE 1. Cutlery Basket For better washing performance, always load the dishwasher according to the instructions. Place forks and spoons in the cutlery basket with their handles downwards. ■ Before loading items into the dishwasher. •C lean off large particles of food, in particular insoluble items such as bones, pips etc. • I tems with burnt on food should be soaked prior to loading in the dishwasher. ■ While you load items into the dishwasher.
HOW TO USE AND OPERATE 2. Lower Rack 3. Upper Rack The lower rack is suitable for dinner plates, soup bowls, dishes, pots, pans, lids and even the grill tray. The upper rack is suitable for delicate items such as, small plates, long cutlery, cups, glasses and dishwasher safe plastic items. Plates should be positioned upright and facing the centre of the rack and pots, pans and large dishes must be turned upside down.
HOW TO USE AND OPERATE Adjusting the height of the upper rack ▲ Model : D1452W(L,M,T,B,C,D,A,S)F(B,U) D1462W(L,M,T,B,C,D,A,S)F(B,U) The height of the upper rack can be adjusted when you load glasses with long stems or tall crockery items. • Move the upper rack to the lower position Pull up the levers on either side of the rack. • Move to upper position Lift the rack upward. There is a 45mm gain in height when the upper rack is moved to the lower position.
HOW TO USE AND OPERATE 4. A dding Detergent • Detergent must be put into the detergent chamber before starting every programme. • Please follow the manufacturer’s instructions within the manual, when determining the correct amount of detergent to use. • If your dishes are moderately dirty, you may use slightly less detergent than recommended. • Chambers hold up to 50g including pre-wash chamber. • The amount of detergent required depends on the programme. Please refer to the guide table.
HOW TO USE AND OPERATE WARNING 5. Refilling ••The detergent used is a special Dishwasher detergent and like all household chemicals it should be treated as harmful and kept out of reach of children. ■ For refilling Rinse Aid Depending on the dosage setting and the number of washes, the chamber may need to be topped up, approximately once a month. The rinse aid level can be checked by two methods.
HOW TO USE AND OPERATE 6. Drying ■ To assist drying, we recommend that the door be partially opened after the cycle. The display will indicate Cd(cool dry) for a further 60 minutes after the end of the cycle time. It can be interrupted or terminated by simply opening the door. ■ The use of rinse aid is recommended for optimum drying results. ■ Select the Extra Hot option to get better drying results.
OPERATING SEQUENCE After starting, the display window shows the remaining time. The time in the display window will start to decrease minute by minute. If the door is opened during the programme a safety device ensures that the machine stops. Once the door is re-closed the programme will start from where it was interrupted. 1. Press the Power button 2. Check there is rinse aid and salt The corresponding indicator lights will illuminate if refilling is required. 3. Open the door and check the filters 8.
PROGRAMME ▶ Running time may vary according to the water temperature, water pressure and voltage. ▶ Running time doesn’t include Cool Dry - 60min. Programme WASH Pre Wash Main Wash 45℃ 60℃ Dual Spray Auto RINSE Rinse 1 Rinse 2 Heating Rinse DRY COOL DRY 70℃ The programme sequence is optimised and adapted in accordance with how dirty the dishes are. Eco 43℃ 59℃ Care 50℃ 70℃ Quick 60℃ 65℃ Dual Spray Eco This cycle washes the upper and lower racks at different spray intensities.
USER MAINTENANCE INSTRUCTIONS To prevent trouble and poor operating, it is important to check filters and spray arms at regular intervals. Keeping the dishwasher Upper Spray Arm • If you are not using the dishwasher for a long time, run a Care cycle without detergent. When the cycle is finished, clean the dishwasher according to the USER MAINTENANCE INSTRUCTIONS to remove the food debris at the bottom of the dishwasher and close the door. • Pull the upper rack forwards.
TROUBLE SHOOTING GUIDE •If a problem occurs check below to see whether this can be solved. •In the unlikely event that the problem cannot be rectified, please contact a service engineer. Before calling for service Problem Possible Causes Solution • Check the plug. No lights come on when the power is turned on. • Plug is not properly inserted into the socket. •F uses blown or circuit breaker tripped. • The electricity from the house was cut off. The machine does not start.
TROUBLE SHOOTING GUIDE Before calling for service Problem Possible Causes Solution • The drain hose is kinked. • The filter is clogged. • Motor trouble. (Washing motor or Drain motor) • Straighten hose(s). • Clean the filter. • If you can not solve the problem, call for service. The display shows IE code. •W ater is not supplied. •W ater tap is not opened. •W ater sensor has trouble. • Check the water tap. • If you can not solve the problem, call for service.
TROUBLE SHOOTING GUIDE •These are not error codes indicating a malfunction. Before calling for service Description The display shows PF code This indicates there was a power failure. This function protects the dishwasher in the event that the power goes out or the power to the unit is disrupted. When power is returned, and a button is pushed, this will display for 3 seconds and then go away. The display shows Cd code Cd means Cool-dry. This is an additional drying cycle to assist drying performance.
TROUBLE SHOOTING GUIDE NOTE SMARTDIAGNOSIS function is available only for the products with a SMARTDIAGNOSIS mark. In case of a mobile phone with static option, the smart diagnosis function might not operate. Using SMARTDIAGNOSISTM nly use this feature when instructed to do so by the call centre. O The transmission sounds similar to a fax machine, and so has no meaning except to the call centre. SMARTDIAGNOSIS™ can not be activated if the dishwasher does not power up.
SPECIFICATION D1417WFB D1451W(L,M,T,B,C,D,A,S)F D1452W(L,M,T,B,C,D,A,S)F D1462W(L,M,T,B,C,D,A,S)F D1451W(L,M,T,B,C,D,A,S)B D1452W(L,M,T,B,C,D,A,S)B D1462W(L,M,T,B,C,D,A,S)B D1451W(L,M,T,B,C,D,A,S)U D1452W(L,M,T,B,C,D,A,S)U D1462W(L,M,T,B,C,D,A,S)U Capacity 14 Place settings Weight See rating label Power Supply See rating label Power Consumption 1700 W 0.49 W (The off mode. The left-on mode) Water Feed Pressure 50 ~ 800 kPa 32 1. MFL66281485_EN_131210.indd 32 2013.12.
ﺩﻟﻴﻞ ﺍﳌﺎﻟﻚ ﻏﺴﺎﻟﺔ ﺍﻟﺼﺤﻮﻥ WASHING MACHINE OWNER’S MANUAL ﻗﺒﻞ ﺍﻟﺒﺪﺀ ﻓﻲ ﺍﻟﺘﺮﻛﻴﺐ ،ﺍﻗﺮﺃ ﻫﺬﻩ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﺑﻌﻨﺎﻳﺔ. ﺳﻴﺴﻬﻞ ﺫﻟﻚ ﻋﻤﻠﻴﺔ ﺍﻟﺘﺮﻛﻴﺐ ﻭﻳﻀﻤﻦ ﺃﻥ ﻏﺴﺎﻟﺔ ﺍﻷﻃﺒﺎﻕ ﻣﺜﺒﺘﺔ ﺑﺎﻟﺸﻜﻞ ﺍﻟﺼﺤﻴﺢ ﻭﺑﺄﻣﺎﻥ. ﻓﻲ ﺍﳌﺴﺘﻘﺒﻞ. beforeﻟﻠﺮﺟﻮﻉ ﺇﻟﻴﻬﺎ operatingﺑﻌﺪ ﺍﻟﺘﺮﻛﻴﺐ ﺍﺗﺮﻙ ﻫﺬﻩ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﺑﺎﻟﻘﺮﺏ ﻣﻦ ﺍﻟﻐﺴﺎﻟﺔ this manual carefully Please read your set and retain it for future reference.
ﺍﶈﺘﻮﻳﺎﺕ ﺍﶈﺘﻮﻳﺎﺕ٢...................................... ﺷﻜﺮﺍ ﻟﻚ ﻋﻠﻰ ﺷﺮﺍﺋﻚ ﻏﺴﺎﻟﺔ ﺃﻃﺒﺎﻕ .LG ﺗﻌﻠﻴﻤﺎﺕ ﻣﻬﻤﺔ ﻟﻠﺴﻼﻣﺔ ﻳﺮﺟﻰ ﻗﺮﺍﺀﺓ ﺩﻟﻴﻞ ﺍﳌﺎﻟﻚ ﺍﳋﺎﺹ ﺑﺎﳌﻨﺘﺞ ﺑﻌﻨﺎﻳﺔ ،ﻓﺴﺘﺠﺪ ﻓﻴﻪ ﺗﻌﻠﻴﻤﺎﺕ ﻭﺇﺭﺷﺎﺩﺍﺕ ﻣﻬﻤﺔ ﻟﻠﺴﻼﻣﺔ ﻋﻦ ﺗﺮﻛﻴﺐ ﺍﳌﻨﺘﺞ، ﻭﺍﺳﺘﺨﺪﺍﻣﻪ ﻭﺻﻴﺎﻧﺘﻪ. ﺍﺣﺘﻔﻆ ﺑﻬﺎ ﻟﻠﺮﺟﻮﻉ ﺇﻟﻴﻬﺎ ﻓﻲ ﺍﳌﺴﺘﻘﺒﻞ. ﺗﻌﻠﻴﻤﺎﺕ ﻣﻬﻤﺔ ﻟﻠﺴﻼﻣﺔ٣ ......................... ﺍﻗﺮﺃ ﻛﺎﻓﺔ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﻗﺒﻞ ﺍﻻﺳﺘﺨﺪﺍﻡ٤ ..... ﺇﺣﻔﻆ ﻫﺬﻩ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ٥ .............................. ﺗﻌﻠﻴﻤﺎﺕ ﺍﻟﺘﺮﻛﻴﺐ ﲢﻀﻴﺮ ﻣﻜﺎﻥ ﻣﻨﺎﺳﺐ ﺑﲔ ﺍﳋﺰﻥ ٧ ................
ﺗﻌﻠﻴﻤﺎﺕ ﻣﻬﻤﺔ ﻟﻠﺴﻼﻣﺔ ﺍﻗﺮﺃ ﻛﺎﻓﺔ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﻭﺍﻟﺘﻮﺿﻴﺤﺎﺕ ﺍﳋﺎﺻﺔ ﺑﻌﻤﻠﻴﺔ ﺍﻟﺘﺮﻛﻴﺐ ﻗﺒﻞ ﺍﻟﺒﺪﺀ. ﲢﺬﻳﺮ ﻟﺴﻼﻣﺘﻚ ،ﻳﺠﺐ ﺍﺗﺒﺎﻉ ﺍﳌﻌﻠﻮﻣﺎﺕ ﺍﻟﻮﺍﺭﺩﺓ ﻓﻲ ﻫﺬﺍ ﺍﻟﺪﻟﻴﻞ ﻟﺘﻘﻠﻴﻞ ﻣﺨﺎﻃﺮ ﻧﺸﻮﺏ ﺣﺮﻳﻖ ﺃﻭ ﺍﻧﻔﺠﺎﺭ ،ﺃﻭ ﺍﻟﺼﺪﻣﺔ ﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔ ،ﺃﻭ ﻟﺘﺠﻨﺐ ﺗﻠﻒ ﺍﳌﻤﺘﻠﻜﺎﺕ ،ﺃﻭ ﺇﺻﺎﺑﺔ ﺍﻷﺷﺨﺎﺹ ﺃﻭ ﺍﻟﻮﻓﺎﺓ. ﺳﻼﻣﺘﻚ ﻭﺳﻼﻣﺔ ﺍﻵﺧﺮﻳﻦ ﺃﻣﺮ ﻏﺎﻳﺔ ﻓﻲ ﺍﻷﻫﻤﻴﺔ. ﻟﻘﺪ ﻗﺪﻣﻨﺎ ﺍﻟﻌﺪﻳﺪ ﻣﻦ ﺭﺳﺎﺋﻞ ﺍﻟﺴﻼﻣﺔ ﻓﻲ ﻫﺬﺍ ﺍﻟﺪﻟﻴﻞ ﻭﻋﻠﻰ ﺍﳉﻬﺎﺯ ﺍﳋﺎﺹ ﺑﻚ. ﻗﻢ ﺑﻘﺮﺍﺀﺓ ﻭﺍﺗﺒﺎﻉ ﻛﺎﻓﺔ ﺭﺳﺎﺋﻞ ﺍﻟﺴﻼﻣﺔ. ﻫﺬﺍ ﻫﻮ ﺭﻣﺰ ﺗﻨﺒﻴﻪ ﺍﻟﺴﻼﻣﺔ.
ﺗﻌﻠﻴﻤﺎﺕ ﻣﻬﻤﺔ ﻟﻠﺴﻼﻣﺔ ﺍﻗﺮﺃ ﻛﺎﻓﺔ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﻗﺒﻞ ﺍﻻﺳﺘﺨﺪﺍﻡ ﲢﺬﻳﺮ ﻟﺘﻘﻠﻴﻞ ﺧﻄﺮ ﻧﺸﻮﺏ ﺣﺮﻳﻖ ،ﺃﻭ ﺍﻟﺘﻌﺮﺽ ﻟﺼﺪﻣﺔ ﻛﻬﺮﺑﺎﺋﻴﺔ ،ﺃﻭ ﺍﻹﺻﺎﺑﺔ ﺍﺗﺒﻊ ﺍﻻﺣﺘﻴﺎﻃﺎﺕ ﺍﻷﺳﺎﺳﻴﺔ ،ﲟﺎ ﻓﻲ ﺫﻟﻚ ﻣﺎ ﻳﻠﻲ: • • • • • • • ﻳﹸﺮﺟﻰ ﻗﺮﺍﺀﺓ ﻫﺬﺍ ﺍﻟﺪﻟﻴﻞ ﺑﻌﻨﺎﻳﺔ ﻗﺒﻞ ﺍﺳﺘﺨﺪﺍﻡ ﻏﺴﺎﻟﺔ ﺍﻟﺼﺤﻮﻥ ﻷﻭﻝ ﻣﺮﹼﺓ. ﻣﻬﻤﺔ ﺣﻮﻝ ﻛﻴﻔﻴﺔ ﻳﺤﺘﻮﻱ ﻫﺬﺍ ﺍﻟﺪﻟﻴﻞ ﻋﻠﻰ ﺗﻌﻠﻴﻤﺎﺕ ﹼ ﻏﺴﺎﻟﺔ ﺍﻟﺼﺤﻮﻥ ﻭﺗﺮﻛﻴﺒﻬﺎ ﻭﺻﻴﺎﻧﺘﻬﺎ. ﺗﺮﻛﻴﺐ ﹼ ﻳﺘﺤﻤﻞ ﺍﳌﺼﻨﻊ ﺃﻱ ﻣﺴﺆﻭﻟﻴﺔ ﻋﻦ ﺃﻱ ﻣﺸﺎﻛﻞ ﺗﻨﺘﺞ ﻻ ﹼ ﻋﻦ ﺇﻫﻤﺎﻝ ﺗﻌﻠﻴﻤﺎﺕ ﺍﻟﺴﻼﻣﺔ ﻭﺍﳊﺬﺭ ﻫﺬﻩ.
ﺗﻌﻠﻴﻤﺎﺕ ﻣﻬﻤﺔ ﻟﻠﺴﻼﻣﺔ ﺍﻗﺮﺃ ﻛﺎﻓﺔ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﻗﺒﻞ ﺍﻻﺳﺘﺨﺪﺍﻡ ﲢﺬﻳﺮ ﻟﺘﻘﻠﻴﻞ ﺧﻄﺮ ﻧﺸﻮﺏ ﺣﺮﻳﻖ ،ﺃﻭ ﺍﻟﺘﻌﺮﺽ ﻟﺼﺪﻣﺔ ﻛﻬﺮﺑﺎﺋﻴﺔ ،ﺃﻭ ﺍﻹﺻﺎﺑﺔ ﺍﺗﺒﻊ ﺍﻻﺣﺘﻴﺎﻃﺎﺕ ﺍﻷﺳﺎﺳﻴﺔ ،ﲟﺎ ﻓﻲ ﺫﻟﻚ ﻣﺎ ﻳﻠﻲ: ﻻ ﺗﺴﺘﺨﺪﻡ ﺃﻱ ﻧﻮﻉ ﻣﻦ ﺍﶈﺎﻟﻴﻞ ﻓﻲ ﻏﺴﺎﻟﺔ ﺍﻟﺼﺤﻮﻥ ﻷﻥ ﺫﻟﻚ ﻗﺪ ﻳﺘﺴﺒﺐ ﺑﺤﺪﻭﺙ ﺇﻧﻔﺠﺎﺭ ﺃﻭ ﺣﺮﻳﻖ. ﻻ ﺗﺮﺵ ﺍﳌﺎﺀ ﻋﻠﻰ ﺍﳉﻬﺎﺯ ﻣﻦ ﺍﳋﺎﺭﺝ ﻷﻥ ﺫﻟﻚ ﻳﺆﺩﻱ ﺇﻟﻰ ﺧﻠﻞ ﻓﻲ ﺍﻷﺟﺰﺍﺀ ﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔ ﻭﺣﺪﻭﺙ ﺻﺪﻣﺔ ﻛﻬﺮﺑﺎﺋﻴﺔ. ﻻ ﺗﺪﻓﻊ ﺍﻟﺒﺎﺏ ﺍﻟﺪﺍﺧﻠﻲ ﺇﻟﻰ ﺃﺳﻔﻞ ﺃﻭ ﲡﻠﺲ ﻋﻠﻴﻪ ﻷﻥ ﺫﻟﻚ ﻳﺆﺩﻱ ﺍﺧﺘﻼﻝ ﺗﻮﺍﺯﻥ ﺍﻟﺒﺎﺏ ﺃﻭ ﺧﻠﻞ ﻓﻲ ﺍﳉﻬﺎﺯ.
ﺗﻌﻠﻴﻤﺎﺕ ﻣﻬﻤﺔ ﻟﻠﺴﻼﻣﺔ ﲢﺬﻳﺮ ﻗﺪ ﻳﺆﺩﻱ ﺍﻟﺘﻮﺻﻴﻞ ﺍﻟﻐﻴﺮ ﺻﺤﻴﺢ ﺇﻟﻰ ﺍﻟﺪﺍﺭﺓ ﺍﻷﺭﺿﻴﺔ ﻗﺪ ﻳﺆﺩﻱ ﺇﻟﻰ ﺧﻄﺮ ﺣﺪﻭﺙ ﺍﻟﺼﺪﻣﺔ ﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔ ،ﺗﺄﻛﺪ ﻣﻦ ﺇﺟﺮﺍﺀ ﺍﻟﺘﻮﺻﻴﻞ ﻣﻦ ﻗﺒﻞ ﻓﻨﹼﻲ ﺃﻭ ﻛﻬﺮﺑﺎﺋﻲ ﻣﺘﺨﺼﺺ ،ﻭﻻ ﲢﺎﻭﻝ ﺗﻌﺪﻳﻞ ﻣﺘﺨﺼﺺ ﺗﻌﺪﻳﻞ ﺍﳌﺄﺧﺬ. ﻣﻘﺒﺲ ﺍﳉﻬﺎﺯ .ﻓﻲ ﺣﺎﻝ ﻋﺪﻡ ﺇﻣﻜﺎﻧﻴﺔ ﺗﺮﻛﻴﺐ ﺍﻟﻘﺎﺑﺲ ﺑﺎﳌﺄﺧﺬ ،ﺃﻃﻠﺐ ﻣﻦ ﻓﻨﻲ ﹼ ﺍﻟﺘﺨﻠﺺ ﻣﻦ ﺟﻬﺎﺯﻙ ﺍﻟﻘﺪﱘ .١ﺇﻥ ﻇﻬﻮﺭ ﺷﻌﺎﺭ ﺳﻠﺔ ﺍﳌﻬﻤﻼﺕ ﺫﺍﺕ ﺍﻟﻌﺠﻼﺕ ﻭﺍﳌﺮﺳﻮﻡ ﻋﻠﻴﻬﺎ ﺇﺷﺎﺭﺓ ﺿﺮﺏ ﻳﻌﻨﻲ ﺃ ﹼﻥ ﻫﺬﺍ ﺍﳉﻬﺎﺯ ﺧﺎﺿﻊ ﻟﻠﺘﻌﻠﻴﻤﺎﺕ ﺍﻷﻭﺭﺑﻴﺔ . EC / ٩٦ / ٢٠٠٢ .
ﺗﻌﻠﻴﻤﺎﺕ ﺍﻟﺘﺮﻛﻴﺐ ﲢﺬﻳﺮ ﻳﺠﺐ ﺇﺟﺮﺀ ﻋﻤﻠﻴﺎﺕ ﺗﻮﺻﻴﻞ ﺍﻷﻧﺎﺑﻴﺐ ﻭﺍﻟﺘﻮﺻﻴﻼﺕ ﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔ ﻣﻦ ﻗﺒﻞ ﺷﺨﺺ ﻣﺨﺘﺺ )ﻛﻬﺮﺑﺎﺋﻲ ﻭﻓﻨﻲ ﺃﻧﺎﺑﻴﺐ(. ﺍﻻﺟﺮﺍﺀﺍﺕ ﺍﻟﻼﺯﻣﺔ ﻹﺟﺮﺍﺀ ﺍﻟﺘﻤﺪﻳﺪﺍﺕ ﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔ ﲢﻀﻴﺮ ﻣﻜﺎﻥ ﻣﻨﺎﺳﺐ ﺑﲔ ﺍﳋﺰﻥ .١ﻏﺴﺎﻟﺔ ﺍﻟﺼﺤﻮﻥ ﻫﺬﻩ ﻣﺼﻤﻤﺔ ﻟﺘﺘﺴﻊ ﻓﻲ ﺍﳌﻜﺎﻥ ﺍﳌﺒﲔ ﻓﻲ ﺍﻟﺼﻮﺭﺓ ﺃﺩﻧﺎﻩ. ﺗﻨﺒﻴﻪ .٢ﺇﺧﺘﺮ ﻣﻜﺎﻧﺎ ﹰ ﻗﺮﻳﺒﺎ ﹰ ﻣﻦ ﺣﻮﺽ ﺍﻟﻐﺴﻴﻞ ﻹﺟﺮﺍﺀ ﲤﺪﻳﺪﺍﺕ ﺍﳌﻴﺎﻩ ﻭﺃﻧﺎﺑﻴﺐ ﺍﻟﺘﺼﺮﻳﻒ ﺑﺴﻬﻮﻟﺔ. • ﻳﺠﺐ ﻓﺼﻞ ﺍﻟﺪﺍﺭﺓ ﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔ ﺍﳌﻨﺰﻟﻴﺔ ﺍﻟﺘﻲ ﺳﻴﺘﻢ ﻭﺻﻞ ﺍﳉﻬﺎﺯ ﻋﻠﻴﻬﺎ ﻭﺫﻟﻚ ﻛﺈﺟﺮﺍﺀ ﺍﺣﺘﺮﺍﺯﻱ ﻟﻠﺴﻼﻣﺔ .
ﺗﻌﻠﻴﻤﺎﺕ ﺍﻟﺘﺮﻛﻴﺐ ﺗﺮﻛﻴﺐ ﻏﺴﺎﻟﺔ ﺍﻟﺼﺤﻮﻥ ﺑﲔ ﺍﳋﺰﻥ ﲢﻀﻴﺮ ﻏﺴﺎﻟﺔ ﺍﻟﺼﺤﻮﻥ ﻟﻠﺘﺮﻛﻴﺐ .١ﺿﻊ ﻏﺴﺎﻟﺔ ﺍﻟﺼﺤﻮﻥ ﻋﻠﻰ ﻇﻬﺮﻫﺎ. .٢ﺍﺿﺒﻂ ﺃﺭﺟﻞ ﺍﻟﺼﺤﻮﻥ ﻟﺘﻨﺎﺳﺐ ﺍﻻﺭﺗﻔﺎﻉ ﺍﳌﻄﻠﻮﺏ. .١ﻳﺠﺐ ﺿﺒﻂ ﺍﳌﺴﺎﺣﺔ ﻭﺍﻻﺭﺗﻔﺎﻉ ﺍﳋﺎﺹ ﺑﻐﺴﺎﻟﺔ ﺍﻟﺼﺤﻮﻥ ﺑﺎﺳﺘﺨﺪﺍﻡ ﻣﻔﺘﺎﺡ ﺍﻟﺼﻤﻮﻟﺔ. .٢ﺃﺩﺧﻞ ﻏﺴﺎﻟﺔ ﺍﻟﺼﺤﻮﻥ ﻓﻲ ﻣﻜﺎﻧﻬﺎ ﺑﻌﻨﺎﻳﺔ ﻭﺗﺄﻛﺪ ﻣﻦ ﺃﻥ ﺧﺮﻃﻮﻡ ﺍﻟﺘﺠﻔﻴﻒ ﻏﻴﺮ ﻣﻠﻮﻱ ﺃﻭ ﳑﺪﻭﺩﺓ. ﺗﻨﺒﻴﻪ ﺍﺿﺒﻂ ﺍﻟﺒﺮﻏﻰ • ﺇﺫﺍ ﻛﺎﻥ ﺍﺭﺗﻔﺎﻉ ﺍﳋﺰﺍﻥ ﺃﻗﻞ ﻣﻦ ٠٥٨ﻣﻠﻢ ،ﻻ ﺑﺪ ﻣﻦ ﻧﺰﻉ ﺍﻟﻠﻮﺣﺔ ﺍﻟﻌﻠﻴﺎ ﺑﺮﺧﻮ ﺑﺮﻏﻴﲔ) .
ﺗﻌﻠﻴﻤﺎﺕ ﺍﻟﺘﺮﻛﻴﺐ ﺗﻮﺻﻴﻞ ﺧﻂ ﺍﻟﺘﺼﺮﻳﻒ ﻋﻨﺪ ﺗﻮﺻﻴﻞ ﺧﺮﻃﻮﻡ ﺍﻟﺘﺼﺮﻳﻒ ﺍﻟﻰ ﺃﻧﺒﻮﺏ ﻗﺎﺋﻢ ﻣﺴﺘﻘﻞ ،ﻓﻤﻦ ﺍﳌﻬﻢ ﺟﺪﺍ ﺇﺟﺮﺍﺀ ﺍﻟﺘﻮﺻﻴﻞ ﺍﻟﺴﺪﻭﺩ ﻟﻠﻬﻮﺍﺀ. ﺭﺍﺟﻊ ﺍﻟﺸﻜﻞ ﺏ. ﺗﻮﺻﻴﻞ ﺳﺪﻭﺩ ﻟﻠﻬﻮﺍﺀ .٣ﻫﻨﺎﻟﻚ ﻃﺮﻳﻘﺘﲔ ﳕﻮﺫﺟﻴﺘﲔ ﻹﺟﺮﺍﺀ ﺍﻟﺘﻮﺻﻴﻞ ﻛﻤﺎ ﻫﻮ ﻣﺒﲔ ﻓﻲ ﺍﻟﺸﻜﻠﲔ ﺍ ﻭ ﺏ. ٣٠٠ﻣﻠﻢ ﻋﻠﻰ ﺍﻷﺩﻧﻰ ﻳﺠﺐ ﺗﻌﻠﻴﻖ ﺍﳋﺮﻃﻮﻡ ﺑﻄﺮﻳﻘﺔ sﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺗﺼﺮﻳﻒ ﺟﻴﺪ. ﳌﻨﻊ ﺍﻟﺜﻌﺐ ،ﻻ ﺑﺪ ﻣﻦ ﺇﺗﺒﺎﻉ ﺇﺣﺪﻯ ﺍﻟﻄﺮﻳﻘﺘﲔ ﺍﻟﺘﺎﻟﻴﺘﲔ.
ﺗﻌﻠﻴﻤﺎﺕ ﺍﻟﺘﺮﻛﻴﺐ ﺗﻮﺻﻴﻞ ﺧﺮﻃﻮﻡ ﻣﺪﺧﻞ ﺍﳌﺎﺀ ﻛﻴﻔﻴﺔ ﺿﺒﻂ ﻣﺴﺘﻮﻯ ﺍﺭﺗﻔﺎﻉ ﺍﻟﻐﺴﺎﻟﺔ ﻭﺻﻞ ﺧﺮﻃﻮﻡ ﺍﳌﺎﺀ ﺑﺎﻟﺼﻨﺒﻮﺭ) .ﺍﻟﺸﻜﻞ ﺃ( ﺗﻀﻢ ﺑﻌﺾ ﺍﻟﻄﺮﺍﺯﺍﺕ ﺻﻤﺎﻡ ﺍﳌﺪﺧﻞ ﻭﺍﳋﺮﻃﻮﻡ. )ﺍﻟﺸﻜﻞ ﺏ( ﺑﻌﺪ ﺗﻮﺻﻴﻞ ﺧﺮﻃﻮﻡ ﺍﳌﺎﺀ ﺑﺎﻟﺼﻨﺒﻮﺭ ،ﺍﻓﺘﺢ ﺍﻟﺼﻨﺒﻮﺭ ﻹﺯﺍﻟﺔ ﺍﳌﻮﺍﺩ ﺍﻟﻐﺮﻳﺒﺔ )ﺍﻟﻘﺎﺫﻭﺭﺍﺕ ،ﺍﻟﺮﻣﺎﻝ ﺃﻭ ﻧﺸﺎﺭﺓ ﺍﳋﺸﺐ( ﻣﻦ ﺧﻄﻮﻁ ﺍﳌﺎﺀ. ﺩﻉ ﺍﳌﺎﺀ ﻳﺘﺪﻓﻖ ﺩﺍﺧﻞ ﺍﻟﺪﻟﻮ ،ﻭﺍﻓﺤﺺ ﺩﺭﺟﺔ ﺣﺮﺍﺭﺓ ﺍﳌﺎﺀ. ﻭﺻﻞ ﺧﺮﻃﻮﻡ ﺍﻹﻣﺪﺍﺩ ﺑﺼﻤﺎﻡ ﻣﺪﺧﻞ ﺍﳌﺎﺀ. ﺇﺫﺍ ﺷﻌﺮﺕ ﺑﺒﻌﺾ ﺍﻟﺼﻌﻮﺑﺔ ﺧﻼﻝ ﻓﺘﺢ ﻭﺇﻏﻼﻕ ﺑﺎﺏ ﺍﻟﻐﺴﺎﻟﺔ ﻳﺠﺐ ﺿﺒﻂ ﺍﺭﺗﻔﺎﻉ ﺍﻟﻐﺴﺎﻟﺔ.
ﺃﺳﻤﺎﺀ ﺍﻷﺟﺰﺍﺀ .١ .٢ .٣ .٤ .٥ .٦ .٧ .٨ .٩ .١٠ ﻟﻮﺣﺔ ﺍﻟﺘﺤﻜﻢ ﻣﻘﺒﺾ ﺍﻟﻴﺪ ﺍﻟﻐﻄﺎﺀ ﺍﻷﻣﺎﻣﻲ ﺍﻟﻐﻄﺎﺀ ﺍﻷﺳﻔﻞ ﺯﺟﺎﺝ ﺍﻟﻌﺮﺽ ﺯﺭ ﺍﻟﻄﺎﻗﺔ )ﺍﻟﺘﺸﻐﻴﻞ( ﺧﺮﻃﻮﻡ ﺍﻟﺘﺼﺮﻳﻒ ﺧﺮﻃﻮﻡ ﺇﻣﺪﺍﺩ ﺍﳌﺎﺀ ﺳﻠﻚ ﺍﻟﻄﺎﻗﺔ ﺭﺟﻞ ﻗﺎﺑﻠﺔ ﻟﻠﺘﻌﺪﻳﻞ ﺍﳌﻠﺤﻘﺎﺕ .١١ﺍﻟﺮﻑ ﺍﻷﻋﻠﻰ .١٢ﺭﻑ ﺃﺩﻭﺍﺕ ﺍﻷﻛﻞ ﺍﻟﺼﻐﻴﺮﺓ .١٣ﺩﺭﺝ ﺳﺎﺋﻞ ﺍﻟﻐﺴﻴﻞ ﻭﺍﳌﺎﺩﺓ ﺍﳌﺴﺎﻋﺪﺓ ﻟﻠﺸﻄﻒ .١٤ﻏﻄﺎﺀ ﻓﺘﺤﺤﺔ ﺍﻟﺒﺨﺎﺭ .١٥ﺫﺭﺍﻉ ﺍﻟﺮﺵ ﺍﻟﻌﻠﻴﺎ .١٦ﺫﺭﺍﻉ ﺍﻟﺮﺵ ﺍﻟﺴﻔﻠﻰ ﻣﺠﻤﻮﻋﺔ ﺍﳌﺼﻔﺎﺓ .١٧ Accessories .١٨ﺍﻟﺮﻑ ﺍﻷﺳﻔﻞ .
ﻭﻇﺎﺋﻒ ﺃﺯﺭﺍﺭ ﺍﻟﺘﺤﻜﻢ D1451W(L,M,T,B,C,D,A,S)F(B,U) D1452W(L,M,T,B,C,D,A,S)F(B,U) D1417WFB : ﺍﳌﻮﺩﻳﻞ SMARTDIAGNOSISTM ﺗﺘﻮﺍﻓﺮ ﺧﺎﺻﻴﺔ ﻓﻘﻂ ﻓﻲ ﺍﳌﻨﺘﺠﺎﺕ ﺍﻟﺘﻲ ﲢﻤﻞ ﻋﻼﻣﺔ .SMARTDIAGNOSISTM (.٣١ )ﻳﺮﺟﻰ ﺍﻟﺮﺟﻮﻉ ﺇﻟﻰ ﺻﻔﺤﺔ D1462W(L,M,T,B,C,D,A,S)F(B,U) : ﺍﳌﻮﺩﻳﻞ ١٢ 2. MFL66281485_AR_131210.inx 12 2013.12.
١٣ 2. MFL66281485_AR_131210.inx 13 2013.12.
ﻭﻇﺎﺋﻒ ﺃﺯﺭﺍﺭ ﺍﻟﺘﺤﻜﻢ ﻣﺆﺷﺮ ﺍﳌﻌﺎﳉﺔ • ﻳﹸﺸﻴﺮ ﺇﻟﻰ ﺍﳌﺮﺣﻠﺔ ﺍﳊﺎﻟﻴﺔ ﻣﻦ ﺍﻟﺒﺮﻧﺎﻣﺞ. • ﻛﻞ ﻣﻦ » ﻏﺴﻴﻞ « ﻭ » ﺷﻄﻒ « ﻭ » ﲡﻔﻴﻒ « ﺗﻘﻮﻡ ﺑﺎﻟﻮﻣﻴﺾ ﺃﺛﻨﺎﺀ ﻛﻞ ﻣﺮﺣﻠﺔ ﻣﻦ ﻋﻤﻠﻴﺔ ﺍﻟﻐﺴﻴﻞ. • ﺗﻀﻲﺀ ﳌﺒﺔ ﺗﻨﻈﻴﻒ ﺑﻌﺪ ﺍﻧﺘﻬﺎﺀ ﻛﻞ ﺇﺟﺮﺍﺀ ﻭﳌﺪﺓ ٤ﺩﻗﺎﺋﻖ. ﻣﺆ.ﺷﺮ ﺇﻋﺎﺩﺓ ﺗﻌﺒﺌﺔ ﺍﳌﻠﺢ ﻭﺍﻟﺸﻄﻒ • ﻣﻠﺢ :ﻗﻮﻣﻲ ﺑﺈﻋﺎﺩﺓ ﺍﻟﺘﻌﺒﺌﺔ ﲟﻠﺢ ﻣﻦ ﻧﻮﻉ ﺧﺎﺹ ﻋﻨﺪﻣﺎ ﺗﻀﻲﺀ ﺍﻟﻠﻤﺒﺔ. • ﺷﻄﻒ :ﻗﻮﻣﻲ ﺑﺈﻋﺎﺩﺓ ﺍﻟﺘﻌﺒﺌﺔ ﲟﺴﺎﻋﺪ ﺍﻟﺸﻄﻒ ﻋﻨﺪﻣﺎ ﺗﻀﻲﺀ ﺍﻟﻠﻤﺒﺔ. ﻧﺼﻒ ﺍﳊﻤﻮﻟﺔ • ﻓﻲ ﺣﺎﻟﺔ ﺍﳊﻤﻮﻟﺔ ﺍﻟﺼﻐﻴﺮﺓ ﺍﺳﺘﺨﺪﻡ ﺍﻟﺮﻑ ﺍﻷﻋﻠﻰ ﺃﻭ ﺍﻷﺳﻔﻞ ﻟﺘﻮﻓﻴﺮ ﺍﻟﻄﺎﻗﺔ.
ﻗﺒﻞ ﺍﻻﺳﺘﺨﺪﺍﻡ ﻷﻭﻝ ﻣﺮﹼﺓ ﺇﻋﺪﺍﺩ ﻋﺴﺮ ﺍﳌﺎﺀ ﻳﺠﺐ ﻋﻠﻴﻚ ﺍﻟﺘﺤﻘﻖ ﻣﻦ ﺩﺭﺟﺔ ﻋﺴﺮ ﺍﳌﺎﺀ ﻭﺿﺒﻂ ﻣﺴﺘﻮﻯ ﻧﻈﺎﻡ ﺍﻟﺘﺨﻔﻴﻒ ﻗﺒﻞ ﺗﺸﻐﻴﻞ ﻏﺴﺎﻟﺔ ﺍﻷﻃﺒﺎﻕ. ﺍﳋﻄﻮﺓ .١ﺇﻓﺤﺼﻲ ﻭﺗﻌﺮﻓﻲ ﻋﻠﻰ ﻣﺴﺘﻮﻯ ﺩﺭﺟﺔ ﻋﺴﺮ ﺍﳌﺎﺀ >ﻣﺴﺘﻮﻯ ﻋﺴﺮ ﺍﳌﺎﺀ< ﺍﻟﻄﺮﻳﻘﺔ ﺍﻷﻭﻟﻰ (١ﲢﻘﻘﻲ ﻣﻦ ﺩﺭﺟﺔ ﻋﺴﺮ ﺍﳌﺎﺀ ﻓﻲ ﻣﻨﻄﻘﺘﻚ. )ﳝﻜﻦ ﺃﻥ ﺗﺴﺎﻋﺪﻙ ﺷﺮﻛﺔ ﻣﺮﻓﻖ ﺍﳌﻴﺎﻩ ﻓﻲ ﻫﺬﺍ ﺍﻷﻣﺮ(. (٢ﺇﺿﺒﻄﻲ ﻣﺴﺘﻮﻯ ﻧﻈﺎﻡ ﺍﻟﺘﺨﻔﻴﻒ ﻓﻲ ﻏﺴﺎﻟﺔ ﺍﻷﻃﺒﺎﻕ ﻭﻓﻘﹰﺎ ﳌﺴﺘﻮﻯ ﻋﺴﺮ ﺍﳌﺎﺀ .ﺇﺭﺟﻌﻲ ﺇﻟﻰ ﺍﳋﻄﻮﺓ .٢ ) : * Lﻣﺴﺘﻮﻯ ﻧﻈﺎﻡ ﺍﻟﺘﺨﻔﻴﻒ ( ﺍﻟﻄﺮﻳﻘﺔ ﺍﻟﺜﺎﻧﻴﺔ (١ﲢﻘﻘﻲ ﻣﻦ ﺩﺭﺟﺔ ﻋﺴﺮ ﺍﳌﺎﺀ ﺑﺎﺳﺘﺨﺪﺍﻡ ﺷﺮﻳﻂ ﺍﻻﺧﺘﺒﺎﺭ.
ﻗﺒﻞ ﺍﻻﺳﺘﺨﺪﺍﻡ ﻷﻭﻝ ﻣﺮﹼﺓ ﺍﳋﻄﻮﺓ .٣ﻣﻞﺀ ﺍﳌﻠﺢ ﻣﻴﺴﺮﺓ ﻟﻠﻤﺎﺀ ﺧﺎﺻﺔ ﺑﻬﺬﺍ ﺍﻟﻄﺮﺍﺯ. ﻳﻮﺟﺪ ﻣﺎﺩﺓ ﹼ ﻳﺮﺟﻰ ﻗﺮﺍﺀﺓ ﻫﺬﻩ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﺑﺘﻤﻌﻦ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺗﺸﻐﻴﻞ ﺻﺤﻴﺢ. ﻣﻴﺴﺮ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﻧﺘﺎﺋﺞ ﺷﻄﻒ ﻣﺮﺿﻴﺔ ،ﻭﻳﺤﺐ ﺃﻥ ﻻﲢﺘﻮﻱ ﻋﻠﻰ ﺍﻟﻼﱘ ﻷﻥ ﺫﻟﻚ ﻗﺪ ﻳﺘﺮﻙ ﺑﻘﻌﺎ ﹰ ﻳﺠﺐ ﺍﳊﺼﻮﻝ ﻋﻠﻰ ﻣﺎﺀ ﹼ ﻋﻠﻰ ﺍﻷﻭﺍﻧﻲ ﻭﺍﻷﺟﺰﺍﺀ ﺍﻟﺪﺍﺧﻠﻴﺔ ﻟﻠﻐﺴﺎﻟﺔ. ﺍﳌﻴﺴﺮ ﺇﻋﺘﻤﺎﺩﺓ ﻋﻠﻰ ﻣﻴﺴﺮ ﻟﻠﻤﺎﺀ ،ﻭﻳﺘﻢ ﲢﺪﻳﺪ ﻛﻤﻴﺔ ﺍﳌﻠﺢ ﹼ ﻓﻲ ﺣﺎﻝ ﺃﻥ ﺍﳌﺎﺀ ﺍﻟﺬﻱ ﻳﺨﺮﺝ ﻣﻦ ﺍﻟﺼﻨﺒﻮﺭ ﻋﺴﻴﺮﺍ ﹰ ﻓﻴﺠﺐ ﺇﺿﺎﻓﺔ ﹼ ﺩﺭﺣﺔ ﻋﺴﺎﺭﺓ ﺍﳌﻴﺎﻩ. ﻣﻞﺀ ﺍﳌﻠﺢ ﻳﺮﺟﻰ ﺗﻌﺒﺌﺔ ﻋﺒﻮﺓ ﺍﳌﻠﺢ ﺍﳌﺘﺠﺪﺩﺓ ﻗﺒﻞ ﺑﺪﺀ ﺑﺮﻧﺎﻣﺞ ﺍﻟﻐﺴﻴﻞ.
ﻣﻌﻠﻮﻣﺎﺕ ﺍﺧﺘﺒﺎﺭ ﺍﻟﻄﺎﻗﺔ )(EN50242 .٢ﺍﻟﺮﻑ ﺍﻟﻌﻠﻮﻱ ﰎ ﲢﻤﻴﻞ ﺍﳉﻬﺎﺯ ﻭﻓﻘﺎ ﹰ ﻟﻠﻤﻮﺻﻔﺎﺕ ﺍﻟﻘﻴﺎﺳﻴﺔ. • ﺍﻟﺴﻌﺔ :ﺿﺒﻂ ﻟـ ١٤ﻣﻜﺎﻧﺎ ﹰ • ﺍﻟﺒﺮﺍﻟﺪﻭﺭﺓ ﺍﻟﻘﻴﺎﺳﻴﺔ :ﺍﻗﺘﺼﺎﺩﻯ • ﺿﺒﻂ ﻣﺴﺎﻋﺪ ﺍﻟﺸﻄﻒ٤ : • ﻣﺮﺟﻊ ﻟﻠﻤﻨﻈﻒ ٣٥ :ﺟﻢ ﻣﻦ ﺍﳌﻨﻈﻒ ﻋﻠﻰ ﺍﻟﺴﻄﺢ ﺍﻟﺪﺍﺧﻠﻲ ﻣﻦ ﺍﻟﺒﺎﺏ. • ﻳﺠﺐ ﺇﺩﺧﺎﻝ ﺍﻟﺮﻑ ﺍﻟﺬﻱ ﻋﻠﻰ ﺷﻜﻞ ﺣﺮﻑ Uﺍﻟﻘﺎﺑﻞ ﻟﻀﺒﻂ ﺍﻻﺭﺗﻔﺎﻉ ﻓﻲ ﺍﻟﻮﺿﻊ ﺍﻷﻋﻠﻰ. • ﻫﻲ ﺍﻟﺪﻭﺭﺓ ﺍﻷﺁﺛﺮ ﻓﻌﺎﻟﻴﺔ ﻓﻴﻤﺎ ﻳﺘﻌﻠﻖ ﺑﺘﻮﻓﻴﺮ ﺍﻻﺳﺘﻬﻼﻙ ﻓﻲ ﺍﻟﻄﺎﻗﺔ ﻭﺍﳌﺎﺀ ﻟﻬﺬﺍ ﺍﻟﻨﻮﻉ ﻣﻦ ﺃﺩﻭﺍﺕ ﺍﳌﺎﺋﺪﺓ.
ﻛﻴﻔﻴﺔ ﺍﻻﺳﺘﺨﺪﺍﻡ ﻭﺍﻟﺘﺸﻐﻴﻞ ﺣﻤﻞ ﺍﻻﺳﺘﺨﺪﺍﻡ ﺍﻟﻴﻮﻣﻲ .٢ﺍﻟﺮﻑ ﺍﻟﻌﻠﻮﻱ .١ﺳﻠﺔ ﺃﺩﻭﺍﺕ ﺍﳌﺎﺋﺪﺓ .٣ﺍﻟﺮﻑ ﺍﻟﺴﻔﻠﻲ ﺗﻨﺒﻴﻪ • ﻻ ﺗﺴﺘﺨﺪﻣﻲ ﺍﻟﻘﺪﺭ ﺃﻭ ﺍﳌﻘﻼﺓ ﺍﳌﺰﻭﺩﺓ ﲟﻘﺎﺑﺾ ﺑﻼﺳﺘﻴﻜﻴﺔ. • ﻏﺴﻴﻞ ﺭﺩﻱﺀ ﻟﻠﺒﻘﻊ ﺍﻟﻨﺎﲡﺔ ﻋﻦ ﺃﺣﻤﺮ ﺍﻟﺸﻔﺎﻩ ﺍﳌﻀﺎﺩ ﻟﻠﻤﺎﺀ. ١٨ 2013.12.10 8:59:39 AM 2. MFL66281485_AR_131210.
ﻛﻴﻔﻴﺔ ﺍﻻﺳﺘﺨﺪﺍﻡ ﻭﺍﻟﺘﺸﻐﻴﻞ .١ﺳﻠﺔ ﺃﺩﻭﺍﺕ ﺍﳌﺎﺋﺪﺓ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺃﻓﻀﻞ ﺃﺩﺍﺀ ،ﻳﺮﺟﻰ ﺩﺍﺋﻤﺎ ﺗﻌﺒﺌﺔ ﻏﺴﺎﻟﺔ ﺍﻷﻃﺒﺎﻕ ﻭﻓﻘﺎ ﻟﻠﺘﻌﻠﻴﻤﺎﺕ. ﺿﻊ ﺍﻟﺸﻮﻙ ﻭﺍﳌﻼﻋﻖ ﻓﻲ ﺳﻠﺔ ﺃﺩﻭﺍﺕ ﺍﳌﺎﺋﺪﺓ ﺑﺤﻴﺚ ﺗﻜﻮﻥ ﻣﻘﺎﺑﻀﻬﺎ ﻷﺳﻔﻞ. ﻗﺒﻞ ﺗﻌﺒﺌﺔ ﺍﻷﻭﺍﻧﻲ ﻓﻲ ﻏﺴﺎﻟﺔ ﺍﻷﻃﺒﺎﻕ • ﻳﺮﺟﻰ ﺗﻨﻈﻴﻒ ﻣﻜﻮﻧﺎﺕ ﺍﻟﻄﻌﺎﻡ ﻛﺒﻴﺮﺓ ﺍﳊﺠﻢ، ﻻﺳﻴﻤﺎ ﺍﳌﻜﻮﻧﺎﺕ ﻏﻴﺮ ﺍﻟﻘﺎﺑﻠﺔ ﻟﻠﺬﻭﺑﺎﻥ ﻣﺜﻞ ﺍﻟﻌﻈﺎﻡ، ﻭﺍﻟﺒﺬﻭﺭ ﺍﻟﺦ. • ﻳﺠﺐ ﻏﻤﺮ ﺍﻷﻭﺍﻧﻲ ﺍﻟﺘﻲ ﲢﺘﻮﻱ ﻋﻠﻰ ﺃﻃﻌﻤﺔ ﻣﺤﺘﺮﻗﺔ ﻗﺒﻞ ﻭﺿﻌﻬﺎ ﻓﻲ ﻏﺴﺎﻟﺔ ﺍﻷﻃﺒﺎﻕ. ﻋﻨﺪ ﺗﻌﺒﺌﺔ ﺍﻷﻭﺍﻧﻲ ﻓﻲ ﻏﺴﺎﻟﺔ ﺍﻷﻃﺒﺎﻕ • ﻳﺮﺟﻰ ﻭﺿﻊ ﻛﺎﻓﺔ ﺍﳌﻜﻮﻧﺎﺕ ﻣﻊ ﺗﻮﺟﻴﻪ ﻓﺘﺤﺘﻬﺎ ﻷﺳﻔﻞ ) .
ﻛﻴﻔﻴﺔ ﺍﻻﺳﺘﺨﺪﺍﻡ ﻭﺍﻟﺘﺸﻐﻴﻞ .٣ﺍﻟﺮﻑ ﺍﻟﻌﻠﻮﻱ .٢ﺍﻟﺮﻑ ﺍﻟﺴﻔﻠﻲ ﺍﻟﺮﻑ ﺍﻟﻌﻠﻮﻱ ﻣﻨﺎﺳﺐ ﻟﻠﻌﻨﺎﺻﺮ ﺍﻟﺼﻐﻴﺮ ﻣﺜﻞ ،ﺍﻷﻃﺒﺎﻕ ﺍﻟﺼﻐﻴﺮﺓ ،ﻭﺃﺩﻭﺍﺕ ﺍﳌﺎﺋﺪﺓ ﺍﻟﻄﻮﻳﻠﺔ ،ﻭﺍﻟﻜﺆﻭﺱ ،ﻭﺍﻷﻛﻮﺍﺏ ﻭﺍﻟﻌﻨﺎﺻﺮ ﺍﻟﺒﻼﺳﺘﻴﻜﻴﺔ ﺍﻟﻘﺎﺑﻠﺔ ﻟﻠﻐﺴﻴﻞ ﻓﻲ ﻏﺴﺎﻟﺔ ﺍﻷﻃﺒﺎﻕ. ﺍﻟﺮﻑ ﺍﻟﺴﻔﻠﻲ ﻣﻨﺎﺳﺐ ﻷﻃﺒﺎﻕ ﺍﻟﺘﻘﺪﱘ ،ﻭﺃﻭﻋﻴﺔ ﺍﻟﺼﺎﺑﻮﻥ، ﻭﺍﻷﻃﺒﺎﻕ ،ﻭﺍﻟﻘﺪﻭﺭ ،ﻭﺍﳌﻘﻼﺓ ،ﻭﺍﻷﻏﻄﻴﺔ ﻭﺣﺘﻰ ﺭﻑ ﺍﻟﺸﻮﺍﺀ. ﻳﺠﺐ ﻭﺿﻊ ﺍﻷﻃﺒﺎﻕ ﻓﻲ ﻭﺿﻊ ﻣﺴﺘﻘﻴﻢ ﺑﺤﻴﺚ ﺗﻮﺍﺟﻪ ﻣﺮﻛﺰ ﺍﻟﺮﻑ ﺃﻣﺎ ﺍﻟﻘﺪﻭﺭ ،ﻭﺍﻷﻭﻋﻴﺔ ﺍﳌﻌﺪﻧﻴﺔ ﻭﺍﻷﻃﺒﺎﻕ ﺍﻟﻜﺒﻴﺮﺓ ﻓﻴﺠﺐ ﺗﻮﺟﻴﻬﻬﺎ ﻷﺳﻔﻞ.
ﻛﻴﻔﻴﺔ ﺍﻻﺳﺘﺨﺪﺍﻡ ﻭﺍﻟﺘﺸﻐﻴﻞ ﺿﺒﻂ ﺍﺭﺗﻔﺎﻉ ﺍﻟﺮﻑ ﺍﻟﻌﻠﻮﻱ ﺍﳌﻮﺩﻳﻞ : )D1452W(L,M,T,B,C,D,A,S)F(B,U )D1462W(L,M,T,B,C,D,A,S)F(B,U ﳝﻜﻦ ﺿﺒﻂ ﺍﺭﺗﻔﺎﻉ ﺍﻟﺮﻑ ﺍﻟﻌﻠﻮﻱ ﻋﻨﺪ ﻭﺿﻊ ﺍﻟﻜﺆﻭﺱ ﺃﻭ ﺍﻷﻭﺍﻧﻲ ﺍﻟﻔﺨﺎﺭﻳﺔ ﺍﻟﻄﻮﻳﻠﺔ. • ﺣﺮﻙ ﺍﻟﺮﻑ ﺍﻟﻌﻠﻮﻱ ﺇﻟﻰ ﺍﻟﻮﺿﻊ ﺍﳌﻨﺨﻔﺾ ﺍﺳﺤﺐ ﺍﻷﺫﺭﻉ ﺍﳌﻮﺟﻮﺩﺓ ﻋﻠﻰ ﺃﺣﺪ ﺟﺎﻧﺒﻲ ﺍﻟﺮﻑ ﻷﻋﻠﻰ. • ﺣﺮﻙ ﺇﻟﻰ ﺍﻟﻮﺿﻊ ﺍﻟﻌﻠﻮﻱ ﺍﺭﻓﻊ ﺍﻟﺮﻑ ﻷﻋﻠﻰ. ﻳﺰﻳﺪ ﺍﻻﺭﺗﻔﺎﻉ ﲟﻘﺪﺍﺭ ٤٥ﱈ ﻋﻨﺪ ﲢﺮﻳﻚ ﺍﻟﺮﻑ ﺍﻟﻌﻠﻮﻱ ﺇﻟﻰ ﺍﻟﻮﺿﻊ ﺍﳌﻨﺨﻔﺾ.
ﻛﻴﻔﻴﺔ ﺍﻻﺳﺘﺨﺪﺍﻡ ﻭﺍﻟﺘﺸﻐﻴﻞ .٤ﺇﺿﺎﻓﺔ ﻣﺎﺩﺓ ﺍﻟﺘﻨﻈﻴﻒ • • • • • ﺍﺩﻓﻊ ﺍﻟﺰﺭ ﻟﻠﻔﺘﺢ. ﻳﺠﺐ ﺇﺿﺎﻓﺔ ﻣﻮﺍﺩ ﺍﻟﺘﻨﻈﻴﻒ ﻗﺒﻞ ﺍﻟﺒﺪﺀ ﺑﺄﻱ ﺑﺮﻧﺎﻣﺞ. ﻳﺮﺟﻰ ﺍﺗﺒﺎﻉ ﺗﻮﺻﻴﺎﺕ ﺍﳌﺼﻨﻊ ﻓﻲ ﺩﻟﻴﻞ ﺍﻻﺳﺘﺨﺪﺍﻡ ﻟﻠﺘﺄﻛﺪ ﻣﻦ ﻛﻤﻴﺔ ﻣﻮﺍﺩ ﺍﻟﺘﻨﻈﻴﻒ ﺍﳌﻄﻠﻮﺑﺔ. ﳝﻜﻦ ﺍﺳﺘﺨﺪﻡ ﻛﻤﻴﺔ ﺃﻗﻞ ﺑﺸﻜﻞ ﺑﺴﻴﻂ ﻣﻦ ﺍﻟﻜﻤﻴﺔ ﺍﻟﻌﺎﺩﻳﺔ ﺇﺫﺍ ﻛﺎﻧﺖ ﻣﺘﻮﺳﻄﺔ ﺍﻻﺗﺴﺎﺥ. ﺗﺘﺤﻤﻞ ﺍﻟﻐﺮﻑ ﺣﺘﻰ ٥٠ﺟﻢ ﲟﺎ ﻓﻲ ﺫﻟﻚ ﻏﺮﻓﺔ ﺍﻟﻐﺴﻴﻞ ﺍﻷﻭﻟﻲ. ﺗﻌﺘﻤﺪ ﻛﻤﻴﺔ ﻣﻮﺍﺩ ﺍﻟﻐﺴﻴﻞ ﻋﻠﻰ ﺍﻟﺒﺮﻧﺎﻣﺞ ﺍﳌﻄﻠﻮﺏ، ﻳﺮﺟﻰ ﻣﺮﺍﺟﻌﺔ ﺍﳉﺪﻭﻝ.
ﻛﻴﻔﻴﺔ ﺍﻻﺳﺘﺨﺪﺍﻡ ﻭﺍﻟﺘﺸﻐﻴﻞ .٥ﺇﻋﺎﺩﺓ ﺍﻟﺘﻌﺒﺌﺔ ﲢﺬﻳﺮ ﻹﻋﺎﺩﺓ ﺗﻌﺒﺌﺔ ﻣﺴﺎﻋﺪ ﺍﻟﺸﻄﻒ ﺑﻐﺴﺎﻻﺕ ﺍﻟﺼﺤﻮﻥ • ﻳﺘﻢ ﺍﺳﺘﺨﺪﺍﻡ ﻣﻨﻈﻒ ﺧﺎﺹ ﹼ ﻭﻟﻬﺬﺍ ﻳﺠﺐ ﺍﳊﺬﺭ ﻋﻨﺪ ﺍﻟﺘﻌﺎﻣﻞ ﻣﻊ ﻫﺬﺍ ﺍﳌﻨﻈﻒ ﻷﻧﻪ ﻣﺜﻞ ﺑﺎﻗﻲ ﺍﳌﻨﻈﻔﺎﺕ ﻣﺎﺩﺓ ﻛﻴﻤﻴﺎﺋﻴﺔ ﺗﺸﻜﻞ ﺧﻄﺮﺍﹰ، ﻭﻳﺠﺐ ﺍﳊﻔﺎﻅ ﻋﻠﻴﻬﺎ ﺑﻌﻴﺪﺍ ﹰ ﻋﻦ ﺍﻷﻃﻔﺎﻝ. • ﻳﺠﺐ ﺗﻔﻘﺪ ﻣﺨﺰﻥ ﻣﺎﺩﺓ ﺍﻟﺘﻨﻈﻴﻒ ﺑﻌﺪ ﺍﻻﻧﺘﻬﺎﺀ ﻣﻦ ﻛﻞ ﺑﺮﻧﺎﻣﺞ ﻭﺍﻟﺘﺨﻠﺺ ﻣﻦ ﺃﻱ ﻣﺎﺩﺓ ﺑﺎﻗﻴﺔ.
ﻛﻴﻔﻴﺔ ﺍﻻﺳﺘﺨﺪﺍﻡ ﻭﺍﻟﺘﺸﻐﻴﻞ .٦ﺍﻟﺘﺠﻔﻴﻒ ﻹﻋﺎﺩﺓ ﻣﻞﺀ ﺍﳌﻠﺢ ﻋﻨﺪﻣﺎ ﻳﻜﻮﻥ ﻣﺨﺰﻥ ﺍﳌﻠﺢ ﻓﺎﺭﻏﺎ ﹰ ﺳﻴﻀﻲﺀ ﻣﺆﺷﺮ ﺍﳌﻠﺢ ﺗﻠﻘﺎﺋﻴﺎ ﹰ ﺧﻼﻝ ﺗﺸﻐﻴﻞ ﻏﺴﺎﻟﺔ ﺍﻟﺼﺤﻮﻥ .ﻳﺠﺐ ﻣﻞﺀ ﺍﳌﻠﺢ ﺑﻌﺪ ﺍﻻﻧﺘﻬﺎﺀ ﻣﻦ ﺩﻭﺭﺓ ﺍﻟﻐﺴﻴﻞ .ﻛﻤﺎ ﺃﻧﻨﺎ ﻧﻨﺼﺢ ﲟﻞﺀ ﺍﳌﻠﺢ ﻗﺒﻞ ﺍﻟﺒﺪﺀ ﺑﺎﻟﻐﺴﻴﻞ ﻹﺯﺍﻟﺔ ﺃﻱ ﻣﻠﺢ ﺯﺍﺋﺪ ﻣﻦ ﺍﳌﺮﺓ ﺍﻟﺴﺎﺑﻘﺔ. ﻟﻠﻤﺴﺎﻋﺪﺓ ﻓﻲ ﻋﻤﻠﻴﺔ ﺍﻟﺘﺠﻔﻴﻒ ،ﻧﻮﺻﻲ ﺑﻔﺘﺢ ﺍﻟﺒﺎﺏ ﺟﺰﺋﻴﺎ ﺑﻌﺪ ﺍﻧﺘﻬﺎﺀ ﺍﻟﺪﻭﺭﺓ. ﺳﺘﻌﺮﺽ ﺍﻟﺸﺎﺷﺔ ﻛﻠﻤﺔ ») «Cdﺑﺎﺭﺩ ﺟﺎﻑ( ﳌﺪﺓ ٦٠ ﺩﻗﻴﻘﺔ ﺑﻌﺪ ﺍﻧﺘﻬﺎﺀ ﻭﻗﺖ ﺍﻟﺪﻭﺭﺓ .ﳝﻜﻦ ﻣﻘﺎﻃﻌﺘﻬﺎ ﺃﻭ ﺇﻳﻘﺎﻓﻬﺎ ﺑﺒﺴﺎﻃﺔ ﻋﻦ ﻃﺮﻳﻖ ﻓﺘﺢ ﺍﻟﺒﺎﺏ.
ﺗﺴﻠﺴﻞ ﺍﻟﺘﺸﻐﻴﻞ .١ﺇﺿﻐﻂ ﺯﺭ »ﺗﺸﻐﻴﻞ /ﺍﻳﻘﺎﻑ« ﻛﻤﺎ ﺳﻴﻈﻬﺮ ﺯﻣﻦ ﺍﻟﺒﺮﻧﺎﻣﺞ ﺍﻟﺬﻱ ﺍﺧﺘﺮﺕ ،ﻭﺑﻌﺪ ﺍﻟﺒﺪﺀ ﺳﻴﻈﻬﺮ ﺍﻟﺰﻣﻦ ﺍﳌﺘﺒﻘﻲ ،ﻭﻣﻦ ﺛﻢ ﻳﺒﺪﺃ ﺍﻟﺰﻣﻦ ﺑﺎﻟﻨﻘﺼﺎﻥ ﺩﻗﻴﻘﺔ ﺑﻌﺪ ﺃﺧﺮﻯ. ﺇﺫﺍ ﰎ ﻓﺘﺢ ﺍﻟﺒﺎﺕ ﺧﻼﻝ ﺩﻭﺭﺓ ﺍﻟﺘﺸﻐﻴﻞ ﺗﺘﻮﻗﻒ ﺍﻟﻐﺴﺎﻟﺔ ﻋﻦ ﺍﻟﻌﻤﻞ ﻛﺈﺟﺮﺍﺀ ﺳﻼﻣﺔ ،ﻭﻋﻨﺪ ﺇﻋﺎﺩﺓ ﺇﻏﻼﻕ ﺍﻟﺒﺎﺏ ﺳﺘﻌﻮﺩ ﺍﻟﻐﺴﺎﻟﺔ ﻟﻠﻌﻤﻞ ﻣﻦ ﺍﻟﻨﻘﻄﺔ ﺍﻟﺘﻲ ﺗﻮﻗﻔﺖ ﻋﻨﺪﻫﺎ .٢ﺗﺄﻛﺪ ﻣﻦ ﻭﺟﻮﺩ ﻣﺴﺎﻋﺪ ﻟﻠﺸﻄﻒ ﻭﻣﻠﺢ ﺳﺘﻀﻲﺀ ﻣﺆﺷﺮﺍﺕ ﺍﳌﻮﺍﺩ ﺍﻟﺘﻲ ﲢﺘﺎﺝ ﺇﻟﻰ ﺇﻋﺎﺩﺓ ﺍﻟﺘﻌﺒﺌﺔ. .٨.ﻓﻲ ﻧﻬﺎﻳﺔ ﺑﺮﻧﺎﻣﺞ ﺍﻟﻐﺴﻴﻞ .
ﺍﻟﺒﺮﻧﺎﻣﺞ ﻗﺪ ﻳﺨﺘﻠﻒ ﺯﻣﻦ ﺍﻟﺘﺸﻐﻴﻞ ﺍﻋﺘﻤﺎﺩﺍ ﹰ ﻋﻠﻰ ﺩﺭﺟﺔ ﺣﺮﺍﺭﺓ ﺍﳌﺎﺀ ﻭﺿﻐﻂ ﺍﳌﺎﺀ ﻭﻗﻮﺓ ﺍﻟﻠﺘﻴﺎﺭ ﺍﻟﻜﻬﺮﺑﺎﺋﻲ. ﻳﺘﻀﻤﻦ "ﺍﻟﺘﺠﻔﻴﻒ ﺍﻟﺒﺎﺭﺩ ﻭﻫﻮ ٦٠ﺩﻗﻴﻘﺔ. ﺯﻣﻦ ﺍﻟﺘﺸﻐﻴﻞ ﻻ ﹼ ﺍﻟﺒﺮﻧﺎﻣﺞ ﺭﺵ ﻣﺰﺩﻭﺝ ﺍﻟﻐﺴﻞ ﻗﺒﻞ ﺍﻟﻐﺴﻞ ﺍﻟﻐﺴﻞ ٤٥ﹾ ﻡ ٦٠ﹾ ﻡ ﺍﻟﺸﻄﻒ ﺍﻟﺸﻄﻒ ١ ﺍﻟﺸﻄﻒ ٢ ﺍﻟﺸﻄﻒ ﺍﳊﺎﺭ ٧٠ﹾ ﻡ ﺗﻠﻘﺎﺋﻲ ﻣﺤﺴﻦ ﻭﻓﻖ ﺍﺗﺴﺎﺥ ﺍﻷﻭﺍﻧﻲ.
ﺗﻌﻠﻴﻤﺎﺕ ﺍﻟﺼﻴﺎﻧﺔ ﻟﻠﻤﺴﺘﺨﺪﻡ ﻳﻨﺼﺢ ﺑﺘﻔﻘﺪ ﺍﻟﻔﻼﺗﺮ ﻭﺃﺫﺭﻉ ﺑﺨﺎﺧﺎﺕ ﺍﳌﺎﺀ ﺑﺸﻜﻞ ﻣﻨﺘﻈﻢ ﻟﺘﻔﺎﺩﻱ ﺣﺪﻭﺙ ﻣﺸﺎﻛﻞ ﻭﺗﺸﻐﻴﻞ ﺳﻴﺊ. ﺫﺭﺍﻉ ﺍﻟﺮﺷﺎﺵ ﺍﻟﻌﻠﻮﻳﺔ ﺣﻔﻆ ﻏﺴﺎﻟﺔ ﺍﻷﻃﺒﺎﻕ • ﻓﻲ ﺣﺎﻟﺔ ﻋﺪﻡ ﺍﺳﺘﺨﺪﺍﻡ ﻏﺴﺎﻟﺔ ﺍﻷﻃﺒﺎﻕ ﻟﻔﺘﺮﺓ ﻃﻮﻳﻠﺔ، ﺷﻐﻠﻴﻬﺎ ﻋﻠﻰ ﺩﻭﺭﺓ ﺭﻋﺎﻳﺔ ﺑﺪﻭﻥ ﺇﺿﺎﻓﺔ ﻣﺴﺤﻮﻕ. ﻋﻨﺪﻣﺎ ﺗﻨﺘﻬﻲ ﺍﻟﺪﻭﺭﺓ ﻧﻈﻔﻲ ﻏﺴﺎﻟﺔ ﺍﻷﻃﺒﺎﻕ ﻭﻓﻘﺎ ﻟﻠﺘﻌﻠﻴﻤﺎﺕ ﺍﻟﻮﺍﺭﺩﺓ ﻓﻲ ﺩﻟﻴﻞ ﺍﻟﺼﻴﺎﻧﺔ ﻣﻦ ﻗﺒﻞ ﺍﳌﺴﺘﺨﺪﻡ ﻹﺯﺍﻟﺔ ﺑﻘﺎﻳﺎ ﺍﻟﻄﻌﺎﻡ ﺍﳌﻮﺟﻮﺩﺓ ﻓﻲ ﺍﳉﺰﺀ ﺍﻟﺴﻔﻠﻲ ﻣﻦ ﻏﺴﺎﻟﺔ ﺍﻷﻃﺒﺎﻕ ﻭﺃﻏﻠﻘﻲ ﺍﻟﺒﺎﺏ. • • • • • • • • • ﺍﳌﺼﺎﻓﻲ ﺇﺳﺤﺐ ﺍﻟﺮﻑ ﺍﻟﻌﻠﻮﻱ ﺇﻟﻰ ﺍﻷﻣﺎﻡ.
ﺩﻟﻴﻞ ﲢﺪﻳﺪ ﺍﳌﺸﺎﻛﻞ ﻭﺣﻠﻬﺎ • ﻓﻲ ﺣﺎﻝ ﺣﺪﻭﺙ ﻣﺸﻜﻠﺔ ﻣﺎ ﺃﻧﻈﺮ ﺇﻟﻰ ﺍﳉﺪﻭﻝ ﺃﺩﻧﺎﻩ ﻋﻦ ﻭﺟﻮﺩ ﺣﻞ ﻟﻬﺎ. • ﻓﻲ ﺣﺎﻝ ﻋﺪﻡ ﺍﻟﻘﺪﺭﺓ ﻋﻠﻰ ﺣﻞ ﺍﳌﺸﻜﻠﺔ ﻳﺮﺝ ﺍﻟﺘﺼﺎﻝ ﲟﺮﻛﺰ ﺍﳋﺪﻣﺔ. ﻗﺒﻞ ﺍﻻﺗﺼﺎﻝ ﻟﻄﻠﺐ ﺧﺪﻣﺔ ﺍﻟﺼﻴﺎﻧﺔ ﺍﳌﺸﻜﻠﺔ ﺍﻟﺴﺒﺐ ﺍﶈﺘﻤﻞ ﺍﳊﻞ ﻻ ﺗﻀﻲﺀ ﺃﻱ ﻣﺆﺷﺮﺍﺕ ﻋﻨﺪ ﺗﺸﻐﻴﻞ ﺍﳉﻬﺎﺯ، • ﻟﻢ ﻳﺘﻢ ﺇﺩﺧﺎﻝ ﺍﻟﻘﺎﺑﺲ ﻓﻲ ﺍﳌﺄﺧﺬ ﺍﻟﻜﻬﺮﺑﺎﺋﻲ ﺑﺸﻜﻞ ﺻﺤﻴﺢ. • ﺍﺣﺘﺮﺍﻕ ﻗﺎﻃﻊ )ﻓﻴﻮﺯ( ﺃﻭ ﺍﻧﻄﻔﺎﺀﻩ. • ﰎ ﻗﻄﻊ ﺍﻟﺘﻴﺎﺭ ﺍﻟﻜﻬﺮﺑﺎﺋﻲ. • ﺗﻔﻘﺪ ﺍﻟﻘﺒﺲ ﺍﻟﻜﻬﺮﺑﺎﺋﻲ. • ﺗﻔﻘﺪ ﺍﻟﻜﻬﺮﺑﺎﺀ. • ﺍﺗﺼﻞ ﺑﺎﳋﺪﻣﺔ.
ﺩﻟﻴﻞ ﲢﺪﻳﺪ ﺍﳌﺸﺎﻛﻞ ﻭﺣﻠﻬﺎ ﻗﺒﻞ ﺍﻻﺗﺼﺎﻝ ﻟﻄﻠﺐ ﺧﺪﻣﺔ ﺍﻟﺼﻴﺎﻧﺔ ﺍﳌﺸﻜﻠﺔ ﺍﻟﺴﺒﺐ ﺍﶈﺘﻤﻞ ﺍﳊﻞ ﻳﻈﻬﺮ ﻋﻠﻰ ﺍﺍﻟﺸﺎﺷﺔ ».«OE )ﻻ ﳝﻜﻦ ﺗﺼﺮﻳﻒ ﺍﳌﻴﺎﻩ( • ﺧﺮﻃﻮﻡ ﺍﻟﺘﺠﻔﻴﻒ ﻣﺜﻨﻲ. • ﺍﳌﺼﻔﺎﺓ ﻣﺴﺪﻭﺩﺓ. • ﺍﶈ ﹼﺮﻙ ﻻ ﻳﻌﻤﻞ )ﻣﺤ ﹼﺮﻙ ﺍﻟﻐﺸﻴﻞ ﺃﻭ ﻣﺤ ﹼﺮﻙ ﺍﻟﺘﺠﻔﻴﻒ(. • ﻗﻢ ﺑﺘﺴﻮﻳﺔ ﺍﳋﺮﻃﻮﻡ. • ﹼ ﻧﻈﻒ ﺍﳌﺼﺎﻓﻲ. • ﺇﺫﺍ ﻟﻢ ﲢﻼ ﳌﺸﻜﻠﺔ ﺇﺗﺼﻞ ﲟﺮﻛﺰ ﺍﳋﺪﻣﺔ. ﻳﻈﻬﺮ ﻋﻠﻰ ﺍﻟﺸﺎﺷﺔ ﺭﻣﺰ ».«IE • ﻻ ﻳﺘﻢ ﺗﺰﻳﻮﺩ ﺍﳌﻴﺎﻩ. • ﻟﻢ ﻳﺘﻢ ﻓﺘﺢ ﺻﻨﺒﻮﺭ ﺍﳌﻴﺎﻩ. • ﻣﺆﺷﺮ ﺍﳌﺎﺀ ﻻ ﻳﻌﻤﻞ ﺟﻴﺪﺍﹰ. • ﺗﻔﻘﺪ ﺻﻨﺒﻮﺭ ﺍﳌﺎﺀ. • ﺇﺫﺍ ﻟﻢ ﲢﻼ ﳌﺸﻜﻠﺔ ﺇﺗﺼﻞ ﲟﺮﻛﺰ ﺍﳋﺪﻣﺔ.
ﺩﻟﻴﻞ ﲢﺪﻳﺪ ﺍﳌﺸﺎﻛﻞ ﻭﺣﻠﻬﺎ • ﻫﺬﻩ ﻟﻴﺴﺖ ﺃﻛﻮﺍﺩ ﺧﻄﺄ ﺗﹸﺸﻴﺮ ﺇﻟﻰ ﻭﺟﻮﺩ ﻋﻄﻞ. ﻗﺒﻞ ﺍﻻﺗﺼﺎﻝ ﻟﻄﻠﺐ ﺧﺪﻣﺔ ﺍﻟﺼﻴﺎﻧﺔ ﺍﻟﻮﺻﻒ ﻟﻜﻮﺩ ﺗﻌﺮﺽ ﺍﻟﺸﺎﺷﺔ ﺍﻟﻜﻮﺩ »«PF ﻳﹸﺸﻴﺮ ﺫﻟﻚ ﺇﻟﻰ ﻭﺟﻮﺩ ﺍﻧﻘﻄﺎﻉ ﻓﻲ ﺍﻟﺘﻴﺎﺭ ﺍﻟﻜﻬﺮﺑﺎﺋﻲ. ﺗﺴﺎﻋﺪ ﻫﺬﻩ ﺍﻟﻮﻇﻴﻔﺔ ﻋﻠﻰ ﺣﻤﺎﻳﺔ ﻏﺴﺎﻟﺔ ﺍﻷﻃﺒﺎﻕ ﻓﻲ ﺣﺎﻝ ﺍﻧﻘﻄﺎﻉ ﺍﻟﺘﻴﺎﺭ ﺍﻟﻜﻬﺮﺑﺎﺋﻲ ﺃﻭ ﺍﻧﻘﻄﺎﻉ ﺍﻟﻜﻬﺮﺑﺎﺀ ﻋﻦ ﺍﻟﻮﺣﺪﺓ. ﻭﺑﻌﺪ ﻋﻮﺩﺓ ﺍﻟﺘﻴﺎﺭ ﺍﻟﻜﻬﺮﺑﺎﺋﻲ ،ﻭﻋﻨﺪ ﺍﻟﻀﻐﻂ ﻋﻠﻰ ﺃﺣﺪ ﺍﻷﺯﺭﺍﺭ ،ﺳﻮﻑ ﻳﺘﻢ ﻋﺮﺽ ﺫﻟﻚ ﳌﺪﺓ ٣ﺛﻮﺍﻧﻲ ﺛﻢ ﻳﺨﺘﻔﻲ. ﺗﻌﺮﺽ ﺍﻟﺸﺎﺷﺔ ﺍﻟﻜﻮﺩ »«Cd ﺗﻌﻨﻲ ﻛﻠﻤﺔ ” “Cdﺑﺎﺭﺩ ﺟﺎﻑ .
ﺩﻟﻴﻞ ﲢﺪﻳﺪ ﺍﳌﺸﺎﻛﻞ ﻭﺣﻠﻬﺎ ﻣﻼﺣﻈﺔ ﺗﺘﻮﺍﻓﺮ ﺧﺎﺻﻴﺔ SMARTDIAGNOSISTMﻓﻘﻂ ﻓﻲ ﺍﳌﻨﺘﺠﺎﺕ ﺍﻟﺘﻲ ﲢﻤﻞ ﻋﻼﻣﺔ .SMARTDIAGNOSIS ﻓﻲ ﺣﺎﻟﺔ ﺍﻟﻬﺎﺗﻒ ﺍﶈﻤﻮﻝ ﺍﳌﺰﻭﺩ ﺑﺨﻴﺎﺭ ﺍﻟﺜﺒﺎﺕ ،ﻗﺪ ﻻ ﺗﻌﻤﻞ ﺧﺎﺻﻴﺔ ﺍﻟﺘﺸﺨﻴﺺ ﺍﻟﺬﺁﻱ. TM ﺍﺳﺘﺨﺪﺍﻡ ﻭﻇﻴﻔﺔ SMARTDIAGNOSISTM • ﺍﺳﺘﺨﺪﻡ ﻫﺬﻩ ﺍﻟﻮﻇﻴﻔﺔ ﻋﻨﺪﻣﺎ ﻳﻄﻠﺐ ﺫﻟﻚ ﻣﻦ ﻗﺒﻞ ﻣﺮﺁﺯ ﺍﻻﺗﺼﺎﻝ. ﻳﺼﺪﺭ ﺻﻮﺕ ﻣﺸﺎﺑﻪ ﻟﺼﻮﺕ ﻣﺎﺁﻳﻨﺔ ﺍﻟﻔﺎﺁﺱ ،ﻭﻫﻮ ﻻ ﻳﺤﻤﻞ ﺃﻱ ﻣﻌﻨﻰ ﺳﻮﻯ ﳌﺮﺁﺯ ﺍﻻﺗﺼﺎﻝ ﻓﻘﻂ. • ﻻ ﳝﻜﻦ ﺗﺸﻐﻴﻞ ﺧﺎﺻﻴﺔ SMARTDIAGNOSISTMﺇﺫﺍ ﻟﻢ ﺗﻌﻤﻞ ﺍﻟﻐﺴﺎﻟﺔ. ﺇﺫﺍ ﺣﺪﺙ ﺫﻟﻚ ،ﻓﻴﺠﺐ ﺇﺟﺮﺍﺀ ﻋﻤﻠﻴﺔ ﺍﺁﺗﺸﺎﻑ ﺍﻷﻋﻄﺎﻝ ﻭﺇﺻﻼﺣﻬﺎ ﺑﺪﻭﻥ ﺧﺎﺻﻴﺔ .
ﺍﳌﻮﺍﺻﻔﺎﺕ D1451W(L,M,T,B,C,D,A,S)B D1452W(L,M,T,B,C,D,A,S)B D1462W(L,M,T,B,C,D,A,S)B D1417WFB D1451W(L,M,T,B,C,D,A,S)F D1452W(L,M,T,B,C,D,A,S)F D1462W(L,M,T,B,C,D,A,S)F ٥٩٨ﻣﻠﻢ ٦٠٠ﻣﻠﻢ ٥٦٧ﻣﻠﻢ ٦٠٠ﻣﻠﻢ ٨٢٠ﻣﻠﻢ ٨٥٠ﻣﻠﻢ D1451W(L,M,T,B,C,D,A,S)U D1452W(L,M,T,B,C,D,A,S)U D1462W(L,M,T,B,C,D,A,S)U ٥٩٨ﻣﻠﻢ ﺍﻟﺴﻌﺔ ١٤ﻣﻜﺎﻥ ﻟﻠﻀﺒﻂ ﺍﻟﻮﺯﻥ ﻋﻠﻰ ﻣﻠﺼﻖ ﺍﳌﻌﺪﻝ ﻣﺰ ﹼﻭﺩ ﺍﻟﻄﺎﻗﺔ ﺍﺳﺘﻬﻼﻙ ﺍﻟﻄﺎﻗﺔ ﻋﻠﻰ ﻣﻠﺼﻖ ﺍﳌﻌﺪﻝ ١٧٠٠ﻭﺍﺕ ٠,٤٩ﻭﺍﺕ ﻇﻐ