Owner's Manual

① Programme
• Press the cycle that corresponds to your desired wash cycle.
② Rinse
• Repeated pressing of the Rinse button will select Extra Hot, Rinse+, Extra Hot & Rinse+.
• If you select the Extra Hot( ) function, the operating temperature will be up to 80℃.
(Eco, Auto, Steam Care, Steam Dual Spray, Steam Power)
• When you select Rinse+( ) an additional rinse cycle is added.
③ Child Lock ( )
• Used to lock or unlock the control buttons to prevent all the settings from being changed by a child.
• To activate or release the Child Lock function, press the Child Lock button for 3 seconds while the dishwasher is
in operation.
• All controls will be disabled except the Child Lock and Power buttons.
• Turning off the dishwasher will not reset the Child Lock function. You must release the Child Lock before you can
operate the dishwasher.
④ Spray
• With each press, the level of water jet is changed to Soft ( ), Medium( ) and Strong( ) in a sequence.
(Only Steam Care and Steam Dual Spray)
⑤ Half load
• In case of small load, use upper or lower rack only to save energy.
• With each press, select Upper( ) or Lower( ) rack only. (Except Quick & Dry, Steam Power)
• In case you don’t select this button, the machine always works vario washing, which operates upper and lower spray
arm alternately.
⑥ Delay Start
• If you want to delay the start of selected programme, press this button.
•  Pressing this button will increase time by 1 hour.
• The delay start time can be adjusted from 1 hour to 19 hours.
⑦ Power
• For operating, press this button first for power on.
• After operating, this button automatically switches off for safety and energy saving.
• In case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.
⑧ Beep On/Off
• The dishwasher must be switched on.
• The beep on/off function can be set by pressing the Spray and Delay Start button simultaneously for a few seconds.
⑨ Steam( )
• The Steam symbol light will stay on when the Steam course has been selected.
⑩ Indicator
• Child Lock. •  Refill with rinse aid.
• Refill with special salt. • UV
⑪ Time Left
• Before starting, the display window shows the running time of the selected programme.
•  After starting, the display window shows the remaining time.
• If the dishwasher has a trouble, the trouble type is displayed. (OE, FE, IE, EI, HE, LE, tE)
• If these error letters are displayed, please refer to the trouble shooting guide page 32 and follow the guide.
⑫ UV
•If you want to sterilise the dishes, press Half Load and Delay Start button.
•After drying cycle, steriliser will be performed by UV lamp.
•At this time, St code is displayed in display window.
•When you open the door of dishwasher, UV lamp is turned off.
※ Don’t look at the lamp directly with the naked eye.
16
FUNCTION OF CONTROL BUTTON