Quick Setup Guide

ENGLISH
www.lg.com
Overview
Before you start using the phone, you need to insert the micro-USIM card.
Installing the micro-USIM card
Eject button aperture
The eject button is a small round aperture just above the tray
door. To install a new micro-USIM card:
1. Insert the micro-USIM ejection tool that comes with the phone
(or a thin pin) into the eject button aperture, and push firmly
but gently until the tray pops out.
2. Remove the tray and place the micro-USIM card inside it, with
the contacts out and the angled corner to the right. There is
only one possible way to fit the card snugly into the tray.
3. Carefully reposition the tray in the slot and push it gently back
into the phone.
TIP! Make sure the gold contact area on the card is facing downwards.
Setup
When you first turn on the phone, you will be guided through a series of essential steps to
configure the phone settings.
Turning on the phone Charging the phone
Power/Lock
Key
Press and hold the
Power/Lock key for a
couple of seconds.
• The charging port is at the bottom of the phone.
• Insert one end of the charging cable into the phone and plug the other
end into an electrical socket.
• To maximize the battery lifetime, ensure that the battery is fully charged
before you use it for the first time.
TIP! If the phone is locked and does not work, press and hold the Power/Lock key for 10 seconds to turn it off.
WARNING! Use only LG-approved chargers, batteries, and cables. When using unapproved chargers or
cables, it may cause battery charging slowly or pop up the message regarding slow charging. Or, unapproved
chargers or cables can cause the battery to explode or damage the device, which are not covered by the
warranty.
Setup (continued)
Please read these simple guidelines. Not following these
guidelines may be dangerous or illegal.
Exposure to radio frequency energy
Radio wave exposure and Specific Absorption Rate (SAR)
information.
This mobile phone model has been designed to
comply with applicable safety requirements for exposure
to radio waves. These requirements are based on scientific
guidelines that include safety margins designed to assure
the safety of all persons, regardless of age and health.
• The radio wave exposure guidelines employ a unit of
measurement known as the Specific Absorption Rate, or
SAR. Tests for SAR are conducted using standardised
methods with the phone transmitting at its highest
certified power level in all used frequency bands.
• While there may be differences between the SAR levels
of various LG phone models, they are all designed to
meet the relevant guidelines for exposure to radio waves.
• The SAR limit recommended by the International
Commission on Non-Ionizing Radiation Protection
(ICNIRP) is 2 W/kg averaged over 10 g of tissue.
• The highest SAR value for this model phone tested for
use at theear is 0.409 W/kg (10 g) and when worn on
the body is 0.470 W/Kg (10 g).
• This device meets RF exposure guidelines when used
either in the normal use position against the ear or when
positioned at least 1.5 cm away from the body. When
a carry case, belt clip or holder is used for body-worn
operation, it should not contain metal and should position
the product at least 1.5 cm away from your body. In order
to transmit data files or messages, this device requires
a quality connection to the network. In some cases,
transmission of data files or messages may be delayed
until such a connection is available. Ensure the above
separation distance instructions are followed until the
transmission is completed.
Product care and maintenance
WARNING! Only use batteries, chargers and
accessories approved for use with this particular phone
model. The use of any other types may invalidate any
approval or warranty applying to the phone and may be
dangerous.
• Do not disassemble this unit. Take it to a qualified service
technician when repair work is required.
• Repairs under warranty, at LG’s discretion, may include
replacement parts or boards that are either new or
reconditioned, provided that they have functionality equal
to that of the parts being replaced.
• Keep away from electrical appliances such as TVs, radios
and personal computers.
• The unit should be kept away from heat sources such as
radiators or cookers.
• Do not drop.
• Do not subject this unit to mechanical vibration or shock.
• Switch off the phone in any area where you are required
to by special regulations. For example, do not use your
phone in hospitals as it may affect sensitive medical
equipment.
• Do not handle the phone with wet hands while it is being
charged. It may cause an electric shock and can seriously
damage your phone.
• Do not charge a handset near flammable material as the
handset can become hot and create a fire hazard.
• Use a dry cloth to clean the exterior of the unit (do not
use solvents such as benzene, thinner or alcohol).
• Do not charge the phone when it is on soft furnishings.
• The phone should be charged in a well ventilated area.
• Do not subject this unit to excessive smoke or dust.
• Do not keep the phone next to credit cards or transport
tickets; it can affect the information on the magnetic
strips.
• Do not tap the screen with a sharp object as it may
damage the phone.
Guidelines for safe and efficient use Guidelines for safe and efficient use (continued)
FRONT
BACK
TOP
BOTTOM
Microphone
Infrared LED
Proximity Sensor
Home Key: Return to
home screen from any
screen.
Back Key: Return to
the previous screen.
Exit an app after
using it.
Front-Facing Camera
Lens
Headset Jack
Microphone Speaker
Charger/USB
Port
Touch Screen
Power/Lock
Key
Earpiece
Camera Lens
Menu Key:
Check what
options are
available.
Volume Keys
(Whilst screen is
switched off)
- Long Press
Up to launch
QuickMemo
- Long Press
Down to launch
Camera
Flash
Quick start guide
To download the latest full version of the user guide,
go to www.lg.com on your PC or laptop.
MBM64396632 (1.0)