Owner's Manual

Operation
with
Radio
Presetting
the radio stations
You can
preset
30 stations for FM and AM. Before tun-
ing,
make sure that
you
have tuned down the volume to
the minimum.
1
Press FUNCTION on the front
panel repeatedly
or FM/AM on the remote control until the FM or
AM
appears
in the
display
window.
2
And then
every
time
you press
FM/AM,
FM and
AM
changes alternately.
3
Press and hold TUNING/SKIP or
on the front
panel
for about two seconds until
the
frequency
indication starts to
change,
then
release.
Scanning stops
when the DVD Receiver tunes in a
station. "TUNED" and "STEREO"
(for
stereo
program)
appear
in the
display
window.
Note
"Tuned"
only appears
when the
signal
is FM and
stereo.
4
Press MEMORY.
A
preset
number will flash in the
display
window.
5
Press TUNING/SKIP or on the
front
panel
to select the
preset
number
you
want.
6
Press MEMORY
again.
The station is stored.
7
Repeat steps
3 to 6 to store other stations.
To tune in a station with a weak
signal
Press TUNING/SKIP or
repeatedly
in
step
3 to tune in the station
manually.
To clear all the memorized stations
Press and hold MEMORY for about three seconds and
"CLEAR ALL"
appears
in the
display
window and then
press
MEMORY
again,
the stations are cleared.
Note
If all stations have
already
been
entered,
FULL mes-
sage
will
appear
in the
display
window for a moment
and then a
preset
number will flash. To
change
the
pre-
set
number,
follow the
steps
5-6 as above.
Listening
to the radio
Preset radio stations in the DVD receiver's
memory
first
(see "Presetting
radio stations" on the left
side).
1
Press FM/AM until AM or FM
appears
in the dis-
play
window.
The last received station is tuned in.
2
Press PRESET
/
repeatedly
to select the
preset
station
you
want.
Each time
you press
the
button,
the DVD receiver tunes in
one
preset
station at a time.
3
Adjust
the volume
by rotating
VOLUME on the
front
panel
or
by pressing
VOLUME + or
-
on the
remote control
repeatedly.
To turn off the radio
Press POWER to turn the DVD receiver off or select
another function mode
(DVD/CD,
VIDEO 1 or VIDEO
2).
To listen to
non-preset
radio stations
Use manual or automatic
tuning
in
step
2.
For manual
tuning, press
TUNING/SKIP or
on the front
panel repeatedly.
For automatic
tuning, press
and hold TUNING/SKIP
or for about two seconds on the front
panel.
For
your
reference
If an FM
program
is
noisy
Press MONO/ST. on the front
panel
so that
"STEREO"
disappears
in the
display
window. There
will be no stereo
effect,
but the
reception
will
improve.
Press the button
again
to restore the stereo
effect.
To
improve reception
Realign
the antenna.
18