Owner's Manual

16
Sound
Adjustments (Cont'd)
Sound Mode
You can
enjoy
surround sound
simply by selecting
one
of the
pre-programmed
sound fields
according
to the
program you
want to listen to.
When PCM indicator is
only displayed
in the
display
window:
Each time
you press
SOUND MODE
button,
the sound
mode is
changed
in the
following
order;
(Present mode)
→
HALL1
→
HALL2
→
THEATER
Each time
you press
button,
the sound mode of Pro
Logic
II is
changed
in the
following
order;
DOLBY PL
→
PLII MOVIE
→
PLII MUSIC→ PLII MATRIX
ip
You can select SURROUND OFF
(2CH STEREO)
mode
by
pressing
BY-PASS button.
ote
The surround mode will not be
operated
in Dual I + II
mode
(see page 18).
When the
Analoge
source is received or PDM
(or
PRO
LOGIC)
indicator is
lighted
or
Dolby
Digital
2CH source is received in the DVD
mode.
Each time
you press
or SOUND
button,
the sound
mode of Pro
Logic
is
changed
in the
following
order;
DOLBY PL
→
PLII MOVIE
→
PLII MUSIC
→
PLII MATRIX
ip
You can set PRO LOGIC mode to Off
(2CH STEREO) by
pressing
BY-PASS button and the PRO LOGIC indicator
disap-
pears.
For
your
reference
?
The DVD/TV Receiver memorizes the last mode
settings
for each source
individually.
?
You can
identify
the
encoding
format of
program
software
by looking
at its
packaging.
-
Dolby Digital
discs are labeled with the
logo.
-
Dolby
Surround encoded
programs
are labeled with
the
logo.
-
DTS
Digital
Surround discs are marked with DTS.
ote
When
you play
sound tracks with 96kHz
sampling frequency,
the
output signals
will be converted to 48kHz
(sampling
fre-
quency).
Sound Level
You can set the sound level of the desired channel.
1
Press LEVEL.
The level indicator will
appear
in the
display
window.
2
Press / to select a desired
speaker
to set.
Each time
you press
the /
button,
it is
changed
in the
following
order;
FL
(Front Left)
→
C
(Centre)
→
FR
(Front Right)
→
SR
(Surround Right)
→
SL
(Surround Left)
→
SW
(Subwoofer)
→
FL
(Front Left)
?
On the 2 channel stereo
mode,
you
can
only
select
the SW
(Subwoofer).
3
Press / to
adjust
the sound level of the
selected channel.
(-6dB
~
+6dB)
4
Repeat step
2-3 and
adjust
the sound level of
the other channels.
5
If
setting
is
complete, press
LEVEL.
Test Tone
This function allows
you
to can
easily adjust
the sound
balance of the
speakers
from the listener's
position.
1
Select the test tone mode
by pressing
TEST
TONE.
?Ahiss noise comes out for 2 seconds from each
speak-
ers in the
following
order;
FL
(Front Left)
→
C
(Centre)
→
FR
(Front Right)
→
SR
(Surround Right)
→
SL
(Surround Left)
→
SW
(Subwoofer)
→
FL
(Front Left)
2
You can
adjust
the sound level while the test
tone is
operating.
First
press
LEVEL then
press
the /
buttons,
so that the sound level from
all the
speakers
is same from the listener's
position.
?
During
the test
tone,
if
you adjust
the sound
level,
it will
be
paused
in the current
speaker
channel.
3
If
setting
is
complete, press
TEST TONE.