DVD Home Cinema & Set Top Box System OWNER'S MANUAL MODEL: DAT-200 (Main Unit: DAT-200I, Speakers: DATS-200T, DATS-200W) CD-R/RW Before connecting up or operating this product, read this instruction booklet carefully and please completely. FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO THE BACK COVER OF THIS MANUAL.
Precautions Safety POWER: This CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE cover PERSONNEL. lightning flash equilateral triangle with arrowhead contact your dealer or "LG Electronics U.K.Ltd." symbol within user an to type of plug supplied is not suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted.
Table of Contents Introduction SlowMotion.........................28 SafetyPrecautions.........................2 TableofContents..........................3 Repeat............................28 RepeatA-B.........................28 BeforeUse..............................4-5 TimeSearch........................28 PlayableDiscs...........................4 3DSurround........................28 Precautions.............................5 Zoom..............................29 NotesonDiscs......................
Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD Chapter (DVD only) Sections of (8cm/12cmdisc) can play a DVD-RW, DVD+RW, or itself, some cannot be -- -- the conditions of the the CD-R/RW ment CD-R/RW played on recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs the unit. Do not attach any seal or label to either side labeled side or the recorded side) of a disc.
Before Use (Continued) Precautions Storing After the unit Handling discs playing, store the disc in its case. When Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- The light, shipping the unit original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory.
Front Panel Buttons and Display Window OPEN/CLOSE STANDBY/ON FUNCTION/PLAY STANDBY indicator MONO/STEREO/PAUSE Lit red when the receiver is in Standby mode. PROG./CLEAR/STOP PR/TUNING DISC (-/+)/SKIP/SCAN Tray FUNC. OPEN/CLOSE PLAY ( MONO/ST. ) () PROG.
Remote Control Buttons Select the tuner System's (FM BAND OPEN/CLOSE and AM Opens bands) POWER Switches ON and OFF. System DVD/CD Select the output (CD/DVD). source TV To select the TV mode. digital 0-9 numerical buttons Select directly service, programme number a or select numbered options in a menu. on off teletext. or To display or change the subtitle language for the current service. GUIDE display Selects the programme information list box on the TV screen.
Rear Panel POWER CORD SUBWOOFER LINE OUT Connector AV 2 AUDIO SPEAKER Connectors AUDIO IN(L/R)/VIDEO IN Connectors OUT Connectors OUT(L/R)/VIDEO AV 1 AUDIO IN Connectors IN(L/R)/VIDEO SERVICE PORT Refer to Tips. LOOP THROUGH Connect to your TV. SUBWOOFER LINEOUT AV2IN OUT LOOP THROUGH AV1 IN TV SERVICE E U R O A V OUTPUT(TO TV) ANT-IN OPTICAL IN Connector ANT-IN OUTPUT (TO TV) Connect to a Connect EURO AV SOCKET TV with SCART jack. a TV antenna.
Connections Terrestrial Aerial & TV Connections Make on of the following connections, depending capabilities of your existing equipment. one the ips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the System. Use one of the connections PREATION Rear of TV VIDEO INPUT SCART INPUT described below. AERIAL INPUT AUDIO INPUT Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.
Connections Connecting 1 2 3 4 to (Continued) Optional Equipment Connect a VCR to the AV1 connectors. Connect a additional VCR to the AV2 connectors. Connect an optical output Connect an optical input of DVD of DVD Player (or Digital Player (or Digital Device Device to the OPTICAL IN connector. to the OPTICAL OUT connector.
Connections FM/AM Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. loop aerial to the AM aerial connector. Connect the AM Connect he FM wire aerial to the FM aerial connector. AM Loop aerial FM Wire aerial SUBWOOFER LINE OUT AV2IN OUT PREATION (supplied) (supplied) LOOP THROUGH AV1 IN TV SERVICE E U R O A V OUTPUT(TO TV) ANT-IN otes To prevent noise pickup, keep the AM loop aerial away from the System and other components.
Connections (Continued) Speaker System Connection Connect the speakers using To obtain the best possible the supplied speaker surround sound, cords. adjust the speaker parameters (volume, distance, etc.). If you feel lack of bass frequency: Connect active subwoofer to an the WOOFER OUT connector using a monaural (not supplied). audio cord When you connect an active subwoofer, disconnect the woofer from the SUBWOOFER speaker connector.
Connections (Continued) Speaker Positioning In the of normal case position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and sub- woofer). If you want to increased bass sound, you should connect ? Front active subwoofer. speakers Set up the front ? an speakers or equal distance from your hearing position. Centre The speaker centre speakers and front speakers should ideally be the same height.
Setting Digital up TV stations It is necessary to tune the unit in order to receive TV programmes. Turn TV 4 When the Automatic Search is Store Programme menu completed, the appears. the system and the TV (or monitor), and press the remote control to select the DIGITAL TV on on mode. ip When you turn on the system, automatic search will start unless the unit has already memorised programmes. Automatic Search Press SET UP. 1 The menu appears on the screen.
Setting up Digital TV stations Manual Search You can specific If MUX (UHF CH) is during want to select YES. tune and set the stations has not been found 1 4Press1or2 you manually when the updated or when the station toselectYESorNO. update the selected channel, Otherwise, select NO. the auto search mode. DigtalTVOPERAIN Press SET UP. The menu appears on the screen. ip To cancel Channel Search, press SET UP.
Setting Store Store up Digital TV stations Introduction Service Programme Programme shows information about the current stored programmes. can TV viewing.
Setting Display You 4:3 1 2 3 can up Digital TV stations Format Audio watch TV in various (Letterbox), display formats; (CentreCutOut), 16:9 (Wide). 4:3 Press SET UP. The menu appears on the Press 3/4 to select the press G or Display Format and OK. Press 3/4 to select the 4:3 Letterbox : required Display Select when a Displays images with masking below the picture. 4:3 CentreCutOut : Format. 4:3 TV is connected.
Setting Subtitle up Digital TV stations Software Language This function lets you select your subtitle. You can select Off from the subtitle deactivate all subtitle from the 1 preferred language for menu appears on the language list to press G or OK. 3 Gaelic. Press 3/4 to select 1 screen. Language Off, English, Welsh or Press 1 and press SET UP to return to TV 4 viewing. software. screen.
Setting up Digital TV stations Basic Operation System Information Changing This function shows software version and You signal can the Audio select audio language remote control when two strength. Language with the I/II or more Audio on the Languages are broadcast. Press SET UP. 1 The menu appears on the screen. Changing Press 3/4 to select the 2 System Information.
Basic EPG Operation (Electronic Programme Guide) This system has an Electronic Programme Guide (EPG) help you navigate through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services.
Basic OAD OAD, an Operation (Over Download) abbreviation of Over Air Download, Occasionally, 1 Air a broadcast with means software updated digital programme information will result in the following menu appearing on the TV screen (Over Air can 3 be downloaded After OAD is through complete the the aerial System system. takes about one DigtalTVOPERAIN minute to restart. Download).
Before Operation Glossary for Mini Audio Stream & Surround mode Sound Mode You enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6.1) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark.
Before General This manual Operation Explanation operating the System. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indithat the cating operation is not permitted by the System or gives is not available On-Screen General screen. playback 1 2 on numbers Temporary Repeat Chapter Repeat Track Repeat All Tracks Repeat A-B Repeat Off be displayed on the TV changed on the menu.
Before Initial You can Operation Language Settings set your Personal Preferences own on the System. Disc Language Select DVD for the disc's Menu, Audio, and language a Subtitle. Initial 1 General Settings Operation Other Press SETUP. The setup menu original language set for the disc is selected. language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 38. If you enter the wrong language Original appears.
Before Operation Speaker setup 5.1 Auto Speaker settings You DVD Play DVD set up the System so a DVD disc automatically playing whenever the DVD is inserted. If Auto Play mode is set to On, this System will search a title that playback time is longest and then play back the title automatically. can starts Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the analogue MultiChannel Output.
Before Operation (Continued) Parental Control Rating the disc. These scenes on from 1 to 8 alternatively, or DVD Enter the code of DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain Code Country available for selection more scenes are suitable discs. on some scenes are Rating are Country TV 5.
DVD and Video CD Playing a DVD and Video CD Playback Setup Turn on the 1 VCD2.0 DVD the TV and select the video nected to the Audio Operation source the audio on input ote source con- Unless stated otherwise, all operations described the remote control. Some features may also be available system and select connected to the on the Setup use menu. System. Press OPEN/CLOSE to open the disc Moving tray. to another TITLE DVD 1/3 Load your chosen disc in the side facing down.
DVD and Video CD General Features Still Picture and VCD2.0 DVD 2 You System can To during playback. now advance the pressing A* VCD1.1 will picture frame-by-frame by repeatedly on the remote a * A press PLAY. DVD VCD2.0 System briefly appears on "A B" appears briefly begins (" Time Search title: a the TV at your chosen end again on starting point. screen. point. the TV screen, and the repeat appears the display window).
DVD and Video CD General Features Zoom VCD2.0 DVD Operation (continued) during playback or still the repeatedly, discs: Menus to DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, level press the appropriate number button to select an option. Or, use the 1 234 buttons to highlight your selection, then press ENTER. playback magnification steps. 2 Use the 1 234 buttons to move the zoomed through picture.
Audio and MP3/WMA Disc Operation Notes Playing Audio CD and MP3/WMA Disc CD The MP3 System MP3/WMA formatted play CD-ROM, CD-R on or playing MP3/WMA recordings, MP3/WMA Recordings on right. Insert Recordings An MP3 file is audio data recordings MPEG1 audio CD-RW discs. Before read the notes files that have on The player compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". can not read extension other than disc and close the tray.
Audio and MP3/WMA Disc CD Pause MP3 1 Press PAUSE/STEP WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. Moving to press PLAY To 1 press MP3 WMA repeat During or > Press SKIP/SCAN . twice previous briefly during or step back to to sen start Repeat point. icon and "A 2 Press REPEAT A-B Repeat of audio CD, to go directly to any track, enter the track number using the numbered buttons (0-9) during playback. * " appears again on the menu screen.
JPEG File Operation Viewing JPEG File Moving JPEG This System can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert 1 a disc and close the The MP3/WMA-JPEG choice TV to another File Press SKIP/SCAN . menu appears on the screen. The once or during viewing a previous file. to the will during slide show. go into PAUSE mode.
Programmed Playback CD VCD2.0 with Audio CD Programmed Playback VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program a setup Video CD with PBC, you must set PBC to Off on the menu to use the Program function. See page 23. contain 30 tracks. can Press PROGRAM mode to enter the E The the on with Video CD ote On Program 1 WMA Programmed Playback and MP3/WMA Disc The MP3 during playback or in Program Edit mode.
Additional Information Speaker Setup Adjust the following settings for the built-in 5.1 channel Last Condition surround decoder. DVD Disc Audio This Disc Subtitle R Disc Menu TV Code Volume Menu memorizes the user settings for the last player. If you load a disc that has its settings memo- rized, the last stop position is automatically recalled. Small Distance Language the 0 dB Size Aspect System Memory VCD1.1 disc that you have viewed.
Radio Operation Presetting You can tuning, 50 stations for FM and AM preset make the radio stations (MW). Before that you have turned down the vol- sure Preset radio stations in the 1 AM on the remote control until FM appears in the (MW) time you press 2 Every display or or 2 starts to when the DVD/CD Receiver tunes in station. "TUNED" and "STEREO" appear in the display (for stereo display Press PRESET +/- programmes) window.
Radio RDS Operation Programme Search (PTY) Operation This unit is A which equipped with RDS (Radio Data System), brings a wide range of information to FM radio. casts with Now in in many countries, RDS is a system for transmitting station call signs or network information, description of station programme type text message the use about the station or specifics a ability to encode broadProgramme Type (PTY) codes that indicate type of material being broadcast.
Other Function Sleep Timer You set the can specified Setting System Selecting input to turn off automatically The SLEEP indicator and play sleep sleep time. time appears in the dis- setting changes SLEEP 180→150→120→90→80→70→60→50→40→ 30→20→10→OFF System further information check the time remaining before the remaining time appears in the display the selecting the analogue signal from AV1 AUDIO IN & VIDEO IN Connectors.
Language Code Enter the (See appropriate 24).
Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 26).
Troubleshooting Check the following guide for the possible cause a before problem contacting service. Cause Symptom No power. The power is on, but the System does not work. No of picture. Correction ? The power cord is disconnected. ? ? No disc is inserted. ? Plug the power cord wall outlet. Insert a disc. (Check The TV is not set to receive DVD signal ? Select the on the TV ? The video cable is not connected ? securely. ? or ? very low-level sound is heard.
Troubleshooting (Cont'd) Cause Symptom ? Radio stations cannot The antenna is Correction positioned or connected poorly. be tuned in. Connect the antenna ? securely. the antennas and connect Adjust ? an external antenna if necessary. ? ? The of the stations is too weak in with automatic signal strength (when tuning tuning). No stations have been preset preset or ?T une in the station Preset the stations ? manually. (page 35).
Specification Power [Genral] Refer to main label supply consumption Power Refer to main label Weight External dimensions (W x H x D) 5.9 kg 360 x 82 x 344 Operating conditions Operating humidity Temperature: (labeled (labeled at the bottom at the bottom mm 5°C to 35°C, Operation Laser Semiconductor laser, PAL 625/50, NTSC 525/60 0.5 % [Video] Video input 1.0 V Video output 1.
Technology with the human touch GUARANTEE LG Electronics U.K. Ltd. will 1. All 2. The dealer the provide following services in order to faulty components which fail due to defective manufacture period of 12 months from the original date of purchase. will be expedite replaced this Guarantee. free of charge for a (or their service agent) who sold the product will be reimbursed for any labour providrepair of this LG equipment, for a period of 12 months from the original date of purchase.