DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL : DC368 PAL BZ03 Before connecting, operating or adjusting this product, carefully and read this instruction booklet please completely. Internet Address:http://www.lg.
Precautions / Safety Important notes on CAUTION Notes copyrights: by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER on It is forbidden RISK OF ELECTRIC SHOCK DO NOT OPEN this unit controlling (OR BACK) discs.
Contents Introduction 26-27 Operation with Audio CD and MP3/WMA Disc .26 PlayinganAudioCDandMP3/WMADisc. NotesonMP3/WMARecordings...............26 . SafetyPrecautions.........................2 2 Important notes on controlling this unit. . . . . . . . . TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 . . . . . . . Pause.............................27 MovingtoanotherTrack...............27 RepeatTrack/All/Off...
Before Use Disc-related terms Discs Playable Title The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) Chapter (DVD only) Sections of a picture Audio CD (8cm/12cmdisc) addition, this unit can play audio titles, MP3, WMA or or accompanying feature content or a musical piece that are smaller than titles. DVD-R, DVD±RW, a Kodak PICTURE CD and CD-R or additional feature content, or music album.
Before Use (Cont'd) Storing Precautions After the unit Handling discs playing, store the disc in its case. When Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- The light, shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory.
Front Panel and Display Window PAUSE( / ) Pause playback temporarily / press repeatedly for frame-by-frame playback. Reverse Skip/Scan, Rewind ( ) beginning of current chapter/track or chapter/track. Go to Press and hold for two seconds for Rewinds the a fast to PREVIOUS reverse search tape. PLAY ( G) playback. Forward Skip/Scan, Tape Compartment Starts Disc Insert a Tray Fast-Forward VCR Record () disc here. Go to NEXT chapter/track.
Remote Control DVD/VCR select button Selects operational OPEN/CLOSE EJECT Open or close the the disc mode of remote - POWER Switch this unit ON TV/VCR OPEN/CLOSE EJECT POWER Switch between your TV's tuner and the VCR's internal tuner. TV/VCR DISPLAY CLK/CNT Access the On-Screen Shows you the current time DVD - Select an AV DISPLAY or recording DVD disc. a SELECT/ENTER/OK Acknowledge menu selection. DISC MENU RETURN counter.
Rear Panel AERIAL Connect the aerial using this jack. EURO AV2 Connect to a Satellite Receiver or another video recorder. DVD/VCR AUDIO OUT (Left/Right) Connect to receiver an amplifier, COMPONENT VIDEO OUT Connect to stereo or system. (Y Pb Pr) inputs. TV with Y Pb Pr a AUDIO OUT Connect to Video (Left/Right)(DVD OUT) amplifier, receiver or stereo system. an Output Switch Select either COMPONENT or RGB depending how you connect this unit to the TV.
Connections DVD exclusive out connection Tips Depending your TV and other equipment you wish to connect, there are various ways you could connect the unit. Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. For better sound reproduction, connect this unit's AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See "Connecting to optional equipment" on page 10. Caution -- Make directly to the TV.
Connections Connecting to (Cont'd) Optional Equipment Notes -- Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II /Pro Logic Connect the Left and AUDIO OUT this Right jacks right in jacks on your amplifier, system, using the audio cables.
Before Tuning Operation in a - VCR part video channel on your TV Notes The output frequency of this video recorder (VCR) is set at UHF channel 36. If channel 36 is already used by another TV station, or if the picture is distorted, you can change the transmitter channel of your VCR. Stages 5 8 will show you how to change the output frequency of your VCR. ~ Your TV receives signals from the video recorder (VCR) like another TV station.
Before Setting Operation the clock - VCR part To set the colour Manually The clock in your VCR controls time and date settings for your VCR. 1 Press i. 1 Press 1 or 2 to select TIME DATE. system Press i. 2 The main 3 Press 1 will appear menu on the TV screen. Press OK. Press 3 4 system or 2 to select the SYSTEM and press OK. or 4 to select according to the COLOUR used. HHMMDDMMYY -- :. - - -- -- -- --- .
Before How to Operation using - VCR part the main Tuning menu This VCR menus The can easily be programmed by using displayed on screen. menus are the controlled from the Remote Control Handset. 1 2 by pressing menu will appear on the TV screen. is weak your VCR may signal turn to the MANUAL TUNING section on page 14. 1 Press i button. The main If the TV broadcast Automatically not detect the necessary information and will be and to store them correctly.
Before Tuning In certain Operation VCR part - in TV Stations areas of the Press 2 to select STATION Manually 5 your country broadcast signals that you may so name TV station. Press OK. may be too weak for your VCR's automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually 1 PR CH MFT 09 C10 00 in order for your VCR to store them. Press i.
Before Operation VCR part - the order of TV Stations Changing Deleting After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them against! The instructions given on this page will show you how you can simply move them into your desired order. 1 Press i. The main menu will appear on the TV Press 1 or 2 to select the PR SET. Press OK. TV Stations After tuning TV stations into your VCR you may wish to delete a station.
Before General This manual Operation - DVD part Temporary Explanation the basic instructions for gives operating require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, that the indicating operation is not permitted by this unit this unit. Some DVDs is not available or The TV Some items On-screen 1 2 3 status be or 4 an highlighted. the change The number buttons numbers (e.g.
Before Initial You - DVD Personal Preferences own part Menu Settings set your can Initial 1 Operation (Continued) on this unit. Select you General Settings Language a see for the language Operation Press SETUP. The setup menu appears.
Before Operation (Continued) - DVD Sound Digital Others Audio Output Each DVD disc has Set the part The of audio variety output options. player's Digital Audio Output according to the a type of audio system you DRC, Vocal, PBC and Auto Play settings Press 3/4 to select the desired item and press setting of the selected item is SELECT/ENTER. The use. changed DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" between On and Off.
Before Operation (Continued) - DVD Parental Control Rating Movies scenes not suitable for Therefore, discs may contain Parental Control information that certain DVD Enter the code of DVDs may contain on Code Country DVD children. part applies to the complete the disc. These scenes on disc or scenes are whose standards country/area Code (See "Country disc, referring were to the list List", page 36.).
with Operation Playing You will a only tape playback, Shuttle : back or still picture press F or G. You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) Slow motion tape 5 During playing be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC To switch off the slow motion and tapes (on PAL TV).
Operation with Instant Timer tape Recording (ITR) Your VCR allows you to make variety of simple methods: recordings using 5 a video cassette Your VCR out. runs record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be sound 1 quality Make VCR when using loss in picture and LP. that you have correctly connected your described earlier in this book. sure as Press POWER to turn 2 slight a Insert on your VCR.
with Operation tape recording using On Screen Display Timer 6 You may set up to seven timer record events within one month of the current date. Press the numbered buttons to enter the recording start and end times of the programme that you wish to record. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. You may also select the the start and end times by pressing Note 2 3 PR Insert a video cassette with protection tab into your VCR.
Operation Playing a with DVD and Video CD Playback Setup Turn on 1 Note VCD1.1 input source con- player. system: Turn and select the DVD VCD2.0 DVD the TV and select the video nected to the DVD Audio General Features DVD and Video CD input the audio on source otherwise, all operations described the remote control. Some system Moving When 2 facing up. double-sided DVD is inserted, make the side you want to play is facing down. a Press OPEN/CLOSE to close the tray.
with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD The will player can 1 To Frame-by-frame playback VCD1.1 1 Press PAUSE/STEP 2 You Video CDs (continued) Search VCD2.0 1 Press and hold . player will > or repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward).
with DVD and Video CD Operation General Features Zoom VCD2.0 DVD VCD1.1 during playback or still playback discs: Menus to acti- vate the Zoom function. If you press ZOOM repeatedly, the increases up to six times. 2 Use the 1 2 zoomed 3 4 move the through normal resume playback or DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU. Then, press the appropriate number button to select an option.
with Audio CD and MP3/WMA Disc Operation Playing an Audio CD and MP3 CD The DVD ings Player can play or read the notes files that have on The on the TV on screen. player About the TV go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice screen Go to step 2 menu choice appears on the TV screen. to the MP3/WMA-JPEG 1. menu. 2. 3. 4. Program Folder1 Folder2 Folder3 Folder4 Folder5 Folder6 Clear All 5.
Operation Pause with Audio and MP3/WMA Disc MP3 CD 1 Press PAUSE/STEP 2 To return to WMA Repeat during playback. playback, PAUSE/STEP again. press PLAY or To 1 press repeat to another Track MP3 CD WMA Press . or or > briefly during playback to go to the beginning of the current to return to the track. Press . twice step back to briefly to the previous In of audio case CD, directly to any track, enter the numbered buttons (0-9) during playback. sequence.
Operation Viewing a with JPEG Disc JPEG disc JPEG This DVD Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. 1 Insert disc and close the tray. The MP3/WMA-JPEG choice menu appears TV screen. the The the TV during viewing a picture to the previous file. to or player will during slide show. the flip now picture Press 3/4 during showing a picture picture horizontally or a vertically.
Programmed Playback CD VCD2.0 with Audio CD Programmed Playback function enables you to store your favorite tracks from any disc in the player memory. Program Program mode to enter the on during playback or in Program Edit mode. the stop E The with Video CD Note On a setup Video CD with menu to PBC, you the use must set PBC to Off on the function. See page 18. Program contain 30 tracks. can Press PROGRAM 1 WMA Programmed Playback and MP3/WMA Disc The MP3 VCD1.
Additional On Screen Operation VCR part - Video Doctor Display You may easily amount of tape display the current time or tape counter, left, day, month, year, day of week, channel, programme tape speed and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. (Self-Diagnosis) This feature informs you that there is a problem with your VCR. These error messages will appear on the TV screen. 1 Press i.
Additional Operation Hi-Fi Stereo Sound VCR part - System 2 Press D or E repeatedly Your VCR will record and AUTO: In addition it has Automatically plays playback Hi-Fi stereo sound. digital stereo sound to record and playback the stereo NICAM a decoder. This allows you sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track audio system, video disc or Your VCR's NICAM programmes programmes 4:3 as normal.
Additional Operation Last Condition DVD This CD player - DVD part Memory VCD1.1 memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memorized, the latest stop position is automatically recalled. Notes -- -- Settings are stored in memory for use any time.
Special Recording Copying from DVD To VCR This unit allows you to copy the contents of tape with a press of the COPY button. Recording a DVD to a from another video recorder VHS With this video recorder you an external source, such as recorder Note If the DVD you to copy is copy not be able to copy the disc. you may protected, 1 2 3 Copy a videotape the DVD to VHS Press the COPY button If the DVD disc the into the VCR deck.
Troubleshooting Check the following guide for the possible cause or VCR do not work properly. a before problem DVD or Correction VCR button is not switched Refer to page 2. properly. No power. The power cord is disconnected. The power is on, but the DVD player does No disc is inserted. Plug the power securely. Insert signal the TV player equipment are not connected screen. Turn Digital Audio Output position.
Language Code Enter the (See appropriate 17).
Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 19).
Specification General Power Power requirements AC consumption 23W Dimensions Mass 110-240V, 50/60 Hz 430 X 97.5 X 293 (approx.) 4.8 (approx.) mm (w/h/d) kg Operating temperature 5˚C to 35˚C Operating humidity 5%to90% Timer 24 hours RF Modulator UHF 22-68 (41˚F to REF NC 95˚F) display tape (Adjustable) System Laser Semiconductor Video Head laser, wavelength Double azimuth 4 system 650 heads, helical scanning.
P/NO : 3834RP0100B