DVD PLAYER/ Hi-Fi STEREO VIDEO CASSETTE PLAYER OWNER'S MANUAL MODEL : DC466B PAL BZ03 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. Internet Address:http://www.lg.
Safety Precautions/Important notes on CAUTION Notes on copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER this unit controlling (OR BACK) discs.
Contents Introduction SafetyPrecautions.........................2 2 Important notes on controlling this unit. . . . . . . . . TableofContents..........................3 BeforeUse..............................4-5 Operation with Audio CD and MP3/WMA Disc PlayinganAudioCDandMP3/WMADisc. NotesonMP3/WMARecordings. . . 21-22 . . . . . . . . . . . . . .21 .21 Pause.............................22 PlayableDiscs...........................4 MovingtoanotherTrack...............
Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) In addition, this unit play can a DVD±R, DVD±RW, Kodak PICTURE CD and CD-R audio titles, MP3, WMA (DVD only) DVD or or CD-RW that contains JPEG files and SVCD also. accompanying or feature content additional feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily.
Before Use (Cont'd) Precautions Storing After the unit Handling When shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. The When the unit setting picture and sound of a nearby TV or radio may be distorted during playback. In this case, position the unit The away from the TV or radio, removing the disc.
Front Panel and Window Display POWER Switches the unit to ON OFF. or Reverse Go to Skip/Scan, Rewind ( ) beginning of current chapter/track or Press and hold for two seconds for a fast to PREVIOUS chapter/track. search. reverse Rewinds the tape. Forward Skip/Scan, Fast-Forward ( chapter/track. ) Go to NEXT Press and hold for two seconds for a fast forward search. Winds the tape forwards. STOP ( A ) Stops playback. Disc Tray Insert a disc here.
Remote Control POWER Switch this unit ON or OPEN/CLOSE EJECT Open or close the the disc OFF. DVD/VCR select button operational mode of remote control. - Selects - AV Select input into tape. 0-9 numerical buttons Select numbered items in a menu. (see or forward. VCR: Rewinds the tape during the STOP mode, for fast reverse picture search and Advances the tape during the STOP mode, fast forward picture search. TV VOL +/--: ? Access or remove setup menu. RETURN Remove the setup menu.
Rear Panel AC Power Cord Connect to AUDIO IN a power source. (Left/Right) (VCR IN AV1) signals from an Receive the audio external source to VCR. AUDIO OUT Connect to (Left/Right) (Both DVD and VCR out) amplifier, receiver or stereo system. an COMPONENT VIDEO OUT Connect to a AUDIO OUT Connect to Pr (Y Pb Pr) (DVD inputs. EXCLUSIVE OUT) TV with Y Pb Pr (Left/Right) (DVD EXCLUSIVE OUT) amplifier, receiver or stereo system.
Connections Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. Please refer to the manuals of your TV, Stereo or other devices as necessary to make the PREATION System best connections. For better sound this unit's AUDIO OUT of your reproduction, connect jacks to the audio in jacks amplifier, receiver, stereo or audio/video equipment. See "Connecting to optional equipment" on page 10. Caution -- directly to the TV.
Connections Connecting to (Cont'd) Optional Equipment Notes -- Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II / Pro Logic Connect the Left and AUDIO OUT this Right jacks right in jacks on your amplifier, system, using the audio cables.
Before Setting Operation the clock VCR part - How to Manually The clock in your VCR controls time and date settings for your VCR. 1 menus The or 2 to select TIME DATE. 1 2 HHMNDDMMYY :. - - -- -- -- menu can easily be programmed by using displayed on screen. menus are the controlled from the Remote Control Handset. Press OK. -- the main This VCR Press i. Press 1 using Switch on your TV set and video the POWER button. player by pressing Press i button.
Before General This manual Operation DVD - part Temporary Explanation the basic instructions for gives operating require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, that the indicating operation is not permitted by this unit is not available or on On-Screen The TV screen. 2 Press 3 or AB Repeat A-B can be Resume Action highlighted. change The number buttons (e.g.
Before Initial You - DVD General Settings part Menu Settings set your own Personal Preferences on this unit. can Initial 1 Operation (Cont'd) Select you Language a see for the setup language Operation Press SETUP. The setup menu. This is the menu when you press SETUP. Disc Audio Russian Disc Subtitle English PREATION Disc Menu menu Rating appears.
Before Operation (Cont'd) - DVD Sound Digital part Others Audio Output The DRC, Vocal, PBC and Auto Each DVD disc has a variety of audio output options. Set this unit's Digital Audio Output according to the type of audio system you use. DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" if you connected this unit's DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier ment with a Dolby Digital decoder). or other between On and Off.
Before Operation (Cont'd) - DVD Parental Control Rating Code Country DVD Enter the code of DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain part scenes on the disc. These scenes are country-dependent. were PREATION Code Set Disc Audio rated from 1 to 8, and alternatively, more suitable scenes available for selection on some discs.
with Operation Playing You will a only tape playback, Shuttle : or still picture press F or G. You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) Slow motion tape 5 During playing back be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC To switch off the slow motion and shuttle, press the desired function. tapes (on PAL TV).
Operation with tape Press LP if you wish to record in Recording SP will Your VCR allows you to make recordings connecting to a TV equipped with audio out and video out time SP of time recording immediately for a set (ITR : Instant Timer Recording) or Your VCR runs incorporates Long Play (LP) sound quality when using slight SP. LP will be 6 RECORD which loss in picture display to recording. will appear on the TV screen. Press REC/ITR several times.
Operation Playing with DVD and Video CD DVD and Video CD a Playback Setup Turn on DVD VCD2.0 the TV and select the video nected to the DVD General Features Note VCD1.1 input source con- player. features may also be available Audio system: Turn on the audio system and select the input source connected to the DVD 1 Moving player. Press OPEN/CLOSE to open the disc Unless stated otherwise, all operations described use the remote control.
with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD Frame-by-frame playback VCD1.1 1 Press PAUSE/STEP The 2 You can will - 1 To repeat the track currently The Repeat Track icon appears repeat the disc second time. during playback. The now pressing PAUSE/STEP repeatedly on by Repeat 3 To exit the remote Track/All/Off Repeat 2 To go into pause mode. advance the picture frame-by-frame player Video CDs (continued) Repeat mode, the TV on a screen.
with DVD and Video CD Operation General Features Zoom VCD2.0 DVD (continued) VCD1.1 Checking during playback or still playback to acti- vate the Zoom function. If you press ZOOM repeatedly, the increases up to six times. 2 Use the 1 2 zoomed 3 4 buttons to picture. 3 Press CLEAR to resume normal the the through playback or the contents of DVD Video DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc CD MP3 The DVD Notes MP3/WMA 1 Insert play Recordings a MPEG1 audio files that have The right. on player disc and close the tray. About CD; Audio CD menu appears on the TV go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 screen Press 3/4 to select the MP3/WMA then press ENTER. menu appears on the TV screen. to the MP3/WMA-JPEG 1. 2. 3. 4.
with Audio and MP3/WMA Disc Operation CD Pause MP3 1 Press PAUSE/STEP WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To repeat 1 press CD another Track MP3 WMA Press . twice track. case briefly to step back to the previous of audio CD, to go directly to any track, enter using the numbered buttons (0-9) during playback.
Operation Viewing with JPEG Disc JPEG disc a JPEG Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. This DVD 1 Insert a disc and close the TV to another File Press . or > once advance to the next file 1 Press PAUSE/STEP menu appears on during viewing a picture to the previous file. to or Still Picture tray. The MP3/WMA-JPEG choice Moving the screen. slide show.
Programmed Playback CD VCD2.0 with Audio CD Programmed Playback VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program with Video CD Note On a setup Video CD with PBC, you must set PBC to Off on the menu to use the Program function. See page 14. contain 30 tracks. can Press PROGRAM 1 WMA Programmed Playback and MP3/WMA disc The MP3 mode to enter the during playback or in Program Edit mode.
Additional On Screen Operation - VCR part Video Doctor Display You may easily display the current time or tape counter and amount of tape left, day, month, year, day of week, operating mode, tape speed, of your VCR on the TV place these On Screen onto the and audio output channel If a recording is taking (Self-Diagnosis) This feature informs you that there is a problem with error messages will appear on the TV your VCR. These screen. screen. will not be recorded Displays tape.
Additional Operation-DVD part Last Condition DVD This CD player Memory VCD1.1 memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memo- rized, the latest stop position is automatically recalled. Notes -- -- Settings are stored in memory for use any time.
Special Recording from DVD To VCR Copying This unit allows you to copy the contents of VHS tape with a press of the COPY button. a DVD to a Recording from player another video With this video player you can make recordings from external source, such as copying from another video player or a camcorder. Note an If the DVD you protected, 1 2 are attempting to copy is copy you may not be able to copy the disc.
Controlling You can Your TV with the control the sound level, switch of your LG TV with the input source, and power supplied remote control. Controlling can control your TV using the buttons below. other TVs with the remote control You You Remote Control Supplied can control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code. 1.
Troubleshooting Check the following guide for the possible cause VCR do not DVD or properly. a before problem service. contacting Cause Symptom work of DVD or Correction VCR button is not switched Refer to page 2. properly. No power. The power cord is disconnected. Plug the power securely. The power is on, but the DVD player does No disc is inserted. Insert a cord into the wall outlet disc. not work. No The TV is not set to receive DVD picture. signal output.
Language Code Enter the (See appropriate 13).
Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 15).
Specification General Power Power requirements AC 110-240V consumption 19W Dimensions Mass , 50/60 Hz 430 X 78 X 265 (approx.) 4.2 (approx.) (w/h/d) mm kg Operating temperature 5˚C to 35˚C Operating humidity 5%to90% (41˚F 95˚F) to System Laser Semiconductor laser, Video Head system Double azimuth 4 heads, helical Signal system PAL Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response wavelength 650 nm scanning.
P/NO : 3834RV0021H