Owner's Manual

Installation and
Setup
Tips:
Depending
on
your
TV and other
equipment you
wish to
connect,
there are various
ways you
could
connect the unit.
Please refer to the manuals of
your
TV,
Stereo
System
or other devices as
necessary
to make the
best connections.
For better sound
reproduction,
connect this unit's
AUDIO OUT
jacks
to the audio in
jacks
of
your
amplifier,
receiver,
stereo or audio/video
equipment.
See
"Connecting
to
optional equipment"
on
page
11.
Caution:
Make sure this unit is connected
directly
to the TV.
Set the TV to the correct video
input
channel.
Do not connect this unit's AUDIO OUT
jack
to the
phono
in
jack (record deck)
of
your
audio
system.
Connecting
to a
TV
& Decoder
Make one of the
following
connections,
depending
on the
capabilities
of
your existing equipment.
Basic connection
(AV)
1. Connect the EURO AV1 AUDIO/VIDEO on the
rear
panel
of this unit to the SCART
input
socket
on the TV
using
a RCA-SCART lead.
2. Some TV broadcasters transmit encoded television
signals
which
you
can
only
see with a
purchased
or rented decoder. You can connect such a
decoder
(descrambler)
to this unit.
Basic connection
(RF)
1. Connect the RF antenna cable from
your
indoor/
outdoor antenna to AERIAL
jack
on the rear
panel
of this unit.
2. Connect the
supplied
RF antenna cable from the
RF.OUT
jack
on the rear
panel
of this unit to
your
television's Antenna
Input.
DVD
exclusive out connection
Component
Video
(Color Stream)
connection
1. Connect the
COMPONENT/PROGRESSIVE
SCAN VIDEO OUT
jacks
on the DVD
Player
to
the
corresponding
in
jacks
on the TV
using
the
Y Pb Pr cable.
2. Connect the Left and
Right
AUDIO OUT
jacks
of
the DVD
Player
to the audio
left/right
in
jacks
on
the TV
using
the audio cables.
S-Video connection
1. Connect the S-VIDEO OUT
jack
on this unit to the
S-Video
input jack
on the TV
using
the S-Video
cable.
2. Connect the Left and
Right
AUDIO OUT
jacks
of
the DVD
Player
to the audio
left/right
in
jacks
on
the TV
using
the audio cables.
Progressive
Scan connection
If
your
television is a
high-definition
or
"digital ready"
television,
you may
take
advantage
of the DVD
Player's progressive
scan
output
for the
highest
video
resolution
possible.
If
your
TV does not
accept
the
Progressive
Scan
format,
the
picture
will
appear
scrambled if
you try
Progressive
Scan on the DVD
Player.
1. Connect the
COMPONENT/ PROGRESSIVE SCAN
VIDEO OUT
jacks
on the DVD
Player
to the corre-
sponding
in
jacks
on the TV
using
the Y Pb Pr cable.
2. Connect the Left and
Right
AUDIO OUT
jacks
of the
DVD
Player
to the audio
left/right
in
jacks
on the TV
using
the audio cables.
Notes:
Set the
Progressive
to "On" on the
setup
menu for
progressive signal,
see
page
19.
Progressive
scan does not work with the
analog
video
connections
(yellow
VIDEO OUT
jack)
or S-VIDEO
connection.
Note:
If the TV has an S-video
input,
connect the DVD
player
with the S-video cable. When
using
an S-video
cable,
do
not connect the
yellow
video cable.
AUDIO INPUT
L R
S-VIDEO INPUT
AERIAL
Rear of TV
Rear of DVD+VCR
(Basic connection)
Rear of DVD+VCR
(Component
Video
connection)
COMPONENT VIDEO INPUT/
PROGRESSIVE SCAN
Pr Pb Y
AUDIO
OUT(L)
VIDEO OUT
AUDIO
OUT(R)
VIDEO
INPUT
Decoder
(or Satellite)
10