Owner's Manual

14
How to
using
the main menu
This VCR can
easily
be
programmed by using
the menus
displayed
on screen.
The menus are controlled from the Remote
Control Handset.
1. Switch on
your
TV set and video recorder
by
pressing
the POWER button.
2. Press i button.
The main menu will
appear
on the TV screen.
REC
-
Timer
recording setting (see p. 25).
PR SET
-
Manual
tuning setting (see p. 15).
ACMS
-
ACMS
(Automatic
Channel
Memory
System) (see p. 14).
SET
-
Date & clock
setting (see p. 13).
SYS
-
To set the Colour TV
System (see p. 13).
(Dr.)
-
To check a
problem
with
your
VCR
(see p. 36).
F.OSD ON/OFF
-
To
display
the
operational
mode of
your
VCR
(see p. 36).
(16:9/4:3)
-
To select the
aspect
ratio of
your
TV
(see p. 37).
DECODER
-
To use a
pay-TV
decoder
(or
Satellite)
with
your
VCR
(see p. 37).
(OPR)
-
To
improve
the
playback picture
(see p. 23).
O
NIC
-
To activate or deactivate the NICAM
digital
sound
(see p. 37).
Tip:
You can
change
the menu
language
on the DVD
setup
menu.
(See
the Menu
Language
on
page 18.)
3. Press 1 and 2 to select the desired menu.
Press OK and
press
3 or 4 to select.
4. Press i to remove the menus from the TV screen.
Tuning
in TV
Stations
Automatically
If the TV broadcast
signal
is weak
your
VCR
may
not detect the
necessary
information and
will not be able to store them
correctly.
To overcome
this
problem please
turn to the MANUAL TUNING
section on
page
15.
1. Press POWER to turn on
your
DVD+VCR.
2. Press i button.
The main menu will
appear
on the TV screen.
Press 1 or 2 to select the ACMS.
Press OK.
3. Press OK
again
to start the automatic
tuning
process.
4. The TV STATION TABLE will
appear
when
tuning
is
completed.
Press i to save
your settings.
SET
ON
OFF
OSD
f
Pr-12
Pr-12
Pr-12
ACMS
ACMS
01 C02 00
02 C03 00
03 C04 00
ES
Pr-12
ACMS
PR-01
PR-02
PR-03
,
DELETE :
MOVE :
PSET
R
02 C03 00
03 C04 00
04 C05 00
05 C06 00
06 C07 00
07 C08 00
08 C09 00
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
SYS SET
ON
OFF
OSD
f