Owner's Manual

26
Timer
recording using
On
Screen
Display
(Continued)
8. Press i to set another timer record event and
follow
steps
3 to 8.
Check that the timer event details are correct.
Press i return to screen.
If PLEASE CHECK is
displayed, you
have entered
incorrectly
and will need to re-enter the data.
9. Press POWER to switch
your
DVD+VCR to Timer
Standby
mode.
The timer
symbol ( )
will
appear
in the
display
window while
your
DVD+VCR waits to make the
recording.
10. Press POWER to end timer
recording.
Notes:
The DVD+VCR will
automatically power
off when
Timer
Recording
ends.
During
timer
recording standby
mode,
the DVD and
VCR mode cannot be
operated.
To use the
DVD+VCR,
press
POWER. After
you
use the DVD
or
VCR,
press
POWER
again
to
put
the VCR into
timer
recording standby
mode.
If at a later date
you
wish to
delete
or
change any
of the
settings
in timer event
memory you may
do
so without
having
to enter all the timer event infor-
mation
again. Simply display
the timer event screen.
Use v or
V
to select the event that
you
wish to
delete
or
change.
Press
b
to delete the event...or
Press OK to
change;
then
press
b
or B to
select;
Station, Date,
Start and End times and
recording speed.
Press v or
V
to enter the correct
information.
If Timer
record events
Overlap...
Make sure that the
preset
times of the timer record-
ing
events do not
overlap.
If
they
do,
the earlier
pro-
gramme
will
always
be
given priority.
Example:
Programme
1 is
programmed
to start at 16:00 and
end at 17:00.
Programme
2 is
programmed
to start at 16:30 and
end at 17:30.
(In
this
case,
Programme
1 will be recorded in its
entirety,
but
only
the last 30 minutes of
Programme
2 will be
recorded.)
To watch a DVD while
performing
a timer
recording,
press
DVD to select DVD mode.