DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL : DC593VQ PAL SECAM Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
Precautions / Note Safety importanti sul controllo dell'unita WARNING Notes WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER copyrights: on It is forbidden RISK OF ELECTRIC SHOCK DO NOT OPEN (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents Introduction SafetyPrecautions.........................2 2 Important notes on controlling this unit . . . . . . Operation withAudioCDandMP3Discs. PlayinganAudioCDandMP3Discs. . . . . . .26 .26 Pause.............................26 . . . . . . . . . . TableofContents..........................3 BeforeUse..............................4-5 MovingtoanotherTrack...............26 RepeatTrack/All/Off...................26 PlayableDiscs...........................4 Search..............
Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) Chapter (DVD only) Sections of a picture or Audio CD (8cm/12cmdisc) In addition, this unit can or play a CD-R or Depending CD-RW that MP3 files. on discs cannot be -- The unit cannot no data, or itself, CD-R/RW a musical piece that are smaller composed of one or several chapters. Each assigned a chapter number, enable you to locate the chapter you want.
Before Use (Cont'd) Precautions Storing After the unit Handling When shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. The When setting the unit picture and sound of a nearby TV or radio may be distorted during playback. In this case, position the unit The away from the TV or radio, removing the disc.
Front Panel and Window Display Tape Eject Pause PAUSE( / ) playback temporarily / press repeatedly for frame-by-frame playback. STOP(A) Stops playback. Forward Skip/Scan, Fast-Forward ( ) chapter/track. Go to NEXT Press and hold for two seconds for a fast forward search. Winds the tape forwards. PLAY DVD OPEN/CLOSE Opens or ) closes the disc tray. Disc Insert ( a Starts Reverse Tray Go to disc here. Skip/Scan, beginning of or to Rewind ( ) chapter/track PREVIOUS chapter/track.
Remote Control DVD/VHS select button Selects operational OPEN/CLOSE EJECT mode of remote control. Switch this unit ON or - OPEN/CLOSE EJECT POWER Switch between your TV's tuner and the VCR's internal tuner. TV/VCR DISPLAY CLK/CNT DVD DISPLAY Access the On-Screen Display. Shows you the current time or counter. Seleziona una voce del menu Select channel programme of VCR. SETUP/ i setup Display the title menu DISC MENU Select input into tape.
Rear Panel AUDIO OUT Connect to amplifier, an receiver or (Left/Right) stereo system. COAXIAL Connect to (Digital audio out jack) digital (coaxial) audio equipment. AERIAL Connect the aerial using this jack. EURO AV2 DECODER Connect to pay-TV decoder or another video recorder. VHS IN+OUT/DVD OUT DVD EXCLUSIVE OUT AERIAL DIGITAL AUDIO AUDIO OUT OUT COAXIAL R EURO AV2 DECODER RF.
Connections DVD exclusive out connection Tips Depending your TV and other equipment you wish to connect, there are various ways you could connect the unit. You on Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the 1 can For better sound reproduction, connect this unit's AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See "Connecting to optional equipment" on page 10. 2 playback.
Collegamenti (segue) Connecting Optional Equipment to Notes -- to Connecting channel analog with two amplifier equipped stereo or Dolby Surround an Right AUDIO OUT jacks on this right in jacks on your amplifier, system, using the audio cables.
Before Operation in Tuning a - VCR part video channel on your TV 6 The The output frequency of this video recorder (VCR) is set at UHF channel 36. If channel 36 already used by another TV station, or if picture is distorted, you can change the transmitter channel of your VCR. Stages 5 will show you how to change the output frequency of your VCR.
Before Setting Operation the clock - VCR part To set the colour system Manually The clock in your VCR controls time and date settings for your VCR. 1 Press i. 1 Press 1 or 2 to select TIME DATE. Press OK. :. - - -- -- -- 2 The main 3 Press 1 or Press 3 or 4 menu --- . will appear on the TV screen. 2 to select the SYSTEM and press OK. 4 system used. HHMMDDMMYY -- Press i.
Before Operation How to using This VCR can menus The VCR part - the main Tuning menu easily be programmed by using displayed on screen. menus are the 2 controlled from the Remote please Switch on your TV set and video recorder the POWER button. by pressing menu will appear on the TV is weak your VCR may signal screen. turn to the MANUAL TUNING section on page 14. 1 Press i button.
Before Tuning In certain Operation VCR part - in TV Stations areas of the country broadcast will 4 Searching Press Manually stop when it locates a station. 2 to select MFT. signals Press 3 or 4 to adjust. may be too weak for your VCR's automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually 1 PR CH MFT 09 C10 00 in order for your VCR to store them. CHANNEL/CABLE Press i.
Before Operation Changing - VCR part the order of TV Stations Deleting After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them against! The instructions given on this page will show you how you can simply move them into your desired order. 1 Press i. The main menu will appear on the TV Press 1 or 2 to select the PR SET. Press OK. TV Stations After tuning TV stations into your VCR you may wish to delete a station.
Before General This manual Operation DVD - part Temporary Explanation the basic instructions for gives operating require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by this unit or is not available On-Screen The TV general playback screen. 1 or be can 3 The number buttons numbers 2 to (e.g.
Before Initial You - DVD General Settings part Menu Settings set your own Personal Preferences on this unit. can Initial 1 Operation (Continued) Select you Language a see Operation Press SETUP. The setup menu for the setup language appears.
Before Operation (Continued) - DVD Sound Digital Others Audio Output Each DVD disc has variety of audio output options. player's Digital Audio Output according to the Set the part a type of audio system you use. DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" The DRC, Vocal and PBC settings can be changed. Press 3/4 to select the desired item and press SELECT/ENTER.
Before Operation (Continued) - DVD Parental Control Rating Code Country DVD Enter the code of DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain part scenes on from 1 to 8, and the disc. These alternatively, available for selection country-dependent. scenes are suitable more on some discs.
with Operation Playing You will a only tape playback, Shuttle : or still picture press F or G. You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) Slow motion tape 5 During playing back be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC To switch off the slow motion and shuttle, press the desired function. tapes (on PAL TV).
Operation with Instant Timer tape Press LP if you wish to record in Recording (ITR) Your VCR allows you to make variety of simple methods: recordings using 5 Standard Play. SP will a Recording (ITR) start recording immediately for a set period of time or until the Your VCR incorporates Long Play (LP) time record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes.
with Operation tape recording using On Screen Display Timer 6 You may set up to seven timer record events within one month of the current date. Press the numbered buttons to enter the recording start and end times of the programme that you wish to record. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. You may also select the the start and end times pressing by or 4.
Operation Playing with DVD and Video CD DVD and Video CD a Playback Setup Turn on DVD VCD2.0 the TV and select the video nected to the DVD General Features Note VCD1.1 input source con- player. features may also be available Audio system: Turn on the audio system and select the input source connected to the DVD Unless stated otherwise, all operations described use the remote control. Some Moving player. on the to another TITLE Setup menu.
with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD Frame-by-frame playback now picture frame-by-frame by pressing PAUSE repeatedly on the remote control. DVD The VCD2.0 Repeat on the TV currently playing, All icon appears on the TV On a setup The player will now go into SEARCH mode. 2 Press and hold . or > repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 Repeat A-B a VCD2.0 DVD VCD1.
with DVD and Video CD Operation General Features Zoom DVD VCD2.0 (continued) VCD1.1 Checking during playback or still playback to acti- vate the Zoom function. If you press ZOOM repeatedly, the increases up to six times. 2 Use the 1 2 zoomed 3 4 buttons to picture. 3 Press CLEAR to resume normal the the through playback or the contents of DVD Video DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
with Audio CD and MP3 Discs Operation Playing The DVD Audio CD and MP3 discs an Player CD-ROM, CD-R, Before Insert 1 The read the notes recordings, on menu CD for about two seconds The player will repeatedly tray. the TV screen. Program TRACK 1.MP3 TRACK 2 TRACK 2.MP3 TRACK 3 TRACK 3.MP3 TRACK 4 TRACK 4.MP3 TRACK 5 TRACK 5.MP3 MX2, MX4, MX8 3 Search speed and direction are indicated on the 4 To exit SEARCH mode, press PLAY. TRACK 7.MP3 TRACK 7 Clear All TRACK 8 STER.
Programmed Playback Programmed Playback CD MP3 VCD2.0 with Audio CD Note Program allows you to store your favorite tracks for particular disc in the player memory. contain 32 tracks (Audio CD) The 2 or menu is displayed on the TV setup tray. Video CD with PBC, you must set PBC to Off on the menu to use the Program function. See page 18. Insert Video CD and close the 2 screen. during playback or in the Program Edit mode.
Additional On Screen Operation - VCR part Video Doctor Display You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. (Self-Diagnosis) This feature informs you that there is a problem with error messages will appear on the TV your VCR. These screen. 1 Press i.
Additional Operation Hi-Fi Stereo Sound Your VCR will record and VCR part - System playback 2 Press D E to select: repeatedly AUTO, 4:3 or AUTO: Hi-Fi stereo sound. Automatically plays This allows you to record and playback the sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo tracks back Wide-Screen programmes as Wide-Screen and Normal programmes as normal.
Additional Operation Last Condition DVD This DVD part Notes Memory VCD1.1 CD player - An MP3 file is audio data files that have the The player. it. Screen Saver Player Video Mode VCD2.0 means A change displayed on the TV screen. quality has improved. If not, procedure until picture quality is repeat the above improved. 7. change → MODE2 MODE5 → MODE1 → → MP3 use a new 8. using CD-RW discs. only. names should be named using 8 letters must incorporate the ".
Special Recording Copying from DVD To VCR This unit allows you to copy the contents of VHS tape with a press of the COPY button. Recording from a DVD to a recorder protected, 1 2 3 recorder With this video recorder you an external source, such as Note If the DVD you to copy is copy you may not be able to copy the disc. are a videotape Press the COPY button into the VCR deck. If the DVD disc B. camcorder. on Play the menu button the unit front 1 panel. to begin copying.
Troubleshooting Check the following guide for the possible cause VCR do not DVD or properly. a before problem service. contacting Cause Symptom work of DVD or Correction VHS button is not switched Refer to page 2. properly. No power. The power cord is disconnected. Plug the power securely. The power is on, but the DVD player does No disc is inserted. Insert a disc. (Check that the DVD or, audio CD indicator in the display not work. No The TV is not set to receive DVD picture.
Language Code Enter the (See appropriate 17).
Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 19).
Specification General Power requirements AC 110-240V, 50/60 Hz Power consumption 23W Dimensions Mass 430 X 97.5 X 360 (approx.) 5.4 (approx.
P/NO : 3834RP0080X