Owner's Manual

Operation
Operation
with
tape
Timer
recording using
On Screen
Display
(Continued)
8. Press i to set another timer record event and follow
steps
3 to 7.
Check that the timer event details are correct.
Press i return to screen.
If PLEASE CHECK is
displayed, you
have entered
incorrectly
and will need to re-enter the data.
9. Press POWER to switch
your
DVD+VCR to Timer
Standby
mode.
Note:
The 1W Mode
is not
available in
the
standby
mode for
the timer
recording.
The timer
symbol ( )
will
appear
in the
display
window while
your
DVD+VCR waits to make the
recording.
10. Press POWER to end timer
recording.
Notes:
The DVD+VCR will
automatically power
off when
Timer
Recording
ends.
During
timer
recording standby
mode,
the DVD and
VCR mode cannot be
operated.
To use the
DVD+VCR,
press
POWER. After
you
use the DVD or
VCR,
press
POWER
again
to
put
the VCR into timer
recording standby
mode.
If at a later date
you
wish to
delete
or
change any
of
the
settings
in timer event
memory you may
do so
without
having
to enter all the timer event information
again. Simply display
the timer event screen. Use v
or
V
to select the event that
you
wish to
delete
or
change.
Press
b
to delete the event...or
Press ENTER/OK to
change;
then
press
b
or B to
select; Station, Date,
Start and End times and
recording speed.
Press v or
V
to enter the correct
information.
If Timer record
events
Overlap...
Make sure that the
preset
times of the timer
recording
events do not
overlap.
If
they
do,
the earlier
pro-
gramme
will
always
be
given priority.
Example:
Programme
1 is
programmed
to start at 16:00 and
end at 17:00.
Programme
2 is
programmed
to start at 16:30 and
end at 17:30.
(In
this
case,
Programme
1 will be recorded in its
entirety,
but
only
the last 30 minutes of
Programme
2
will be
recorded.)