Owner's Manual

Additional
Operation
-
VCR
part
Recording
from External
Components
You can record from an external
component,
such as a
camcorder or
VCR,
connected to
any
of the
DVD+VCR's external
inputs.
1. Make sure that the
component you
want to record
from is connected
properly
to the DVD+VCR.
2. Press AV
repeatedly
to select the external
input
to
record from.
AV 1 for
recording
from EURO AV1 SCART
jacks
on
the rear of
your
unit.
AV 2 for
recording
from EURO AV2 DECODER
jacks
on the rear of
your
unit.
AV 3 for
recording
from VIDEO IN and AUDIO IN
(Left
&
Right) jacks
on the front of
your
unit.
3. Load a recordable
tape.
4. Set a
recording
mode
(SP
or
LP)
as
necessary by
pressing
LP
repeatedly.
5.
Play
the
tape
or disc in the external
component.
If
you
have a TV attached to
your
DVD+VCR,
you
can see the video
playing.
6. Press REC/ITR on the Remote Control once to start
recording.
The REC indicator
lights
in the
display
window.
7. Press STOP to
stop recording.
Notes:
?
Before
recording,
confirm the
recording
start
position.
?
If
your
source is
copy-protected using CopyGuard,
you
will not be able to record it
using
this unit. See
Copyright
on
page
5 for more details.
?T o record for a fixed
length
of
time,
see Instant
Timer
Recording.
Copying
from
DVD
to VCR
You can
copy
the contents of a DVD to a VHS
tape.
1. Insert the disc
you
wish to
copy
into the DVD deck
and close the disc
tray.
2. Insert a blank VHS video
tape
into the VCR deck.
3. Find the
place
on the DVD from which
you
want to
start
dubbing using
the
N, BACKWARD,
FORWARD and PAUSE functions.
For best
results,
pause playback
at the
point
from
which
you
want to record.
4. Press REC/ITR on the Remote Control.
The DVD
goes
into PLAY mode and the VCR
goes
into RECORD mode. If the DVD disc menu
appears,
you may
need to
press
N
manually
to
begin
copying.
5. When the DVD is finished
playing, press
STOP to
end
copying.
Notes:
?
If the DVD
you
are
attempting
to
copy
is
copy pro-
tected,
you
will not be able to
copy
the disc. It is not
permitted
to
copy
Macrovision encoded DVDs
(or
Discs).
"LOCK" is
displayed
in the
display
window.
?Y ou must
stop
the
copy process manually
when the
DVD movie
ends,
or the unit
may rep lay
and record
over and over
again.
?
When
you stop
the DVD
playback during copying,
the
recording
on VCR is
stopped automatically.