ENGLISH OWNER’S MANUAL DVD Home Theater System Please read this manual carefully before operating your set and retain it for future reference. DH6430P (DH6430P, S63T1-S /C /W, S63S1-S) DH6430P-F2.BTWNLLK ENG 0988.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. DH6430P-F2.BTWNLLK ENG 0988.indd 3 Notes on Copyrights yy This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Table of Contents Table of Contents 1 Getting Started 2 6 6 6 6 6 6 7 7 7 7 7 8 9 10 11 Safety Information Unique Features – Portable In – USB Direct Recording – Full HD up-scaling – Home Theater Speaker ez Setup Accessories Introduction – Playable Discs – About the “7” Symbol Display – Symbols Used in this Manual – Regional Codes Playable file Requirement Remote control Front panel Rear panel 2 Connecting 12 15 16 17 17 19 19 20 20 20 21 21 Spekaer installation Attaching the speakers to the unit
Table of Contents 5 Troubleshooting 38 Troubleshooting 6 Appendix 39 39 39 40 41 42 43 Maintenance – Handling the Unit – Notes on Discs Area Code List Language code List Trademarks and Licenses Specifications 5 1 2 3 4 5 6 DH6430P-F2.BTWNLLK ENG 0988.
Getting Started Unique Features 1 Portable In Accessories Please check and identify the supplied accessories. Getting Started Listen to music from your portable device. (MP3, Notebook, etc) USB Direct Recording Records music from CD to your USB device. Remote control (1) Battery (1) FM antenna (1) Video cable (1) Speaker cables (5) HDMI Cable (1) Full HD up-scaling Views Full HD picture quality with simple setup.
Getting Started Introduction Playable Discs DVD-VIDEO (8 cm/12 cm disc) Discs such as movies that can be purchased or rented. DVD±R (8 cm/12 cm disc) Video mode and finalized only. DVD-RW (8 cm/12 cm disc) Video mode and finalized only. DVD+R: Video mode only Supports the double layer disc also. DVD+RW (8 cm/12 cm disc) Video mode and finalized only. Audio CD: Music CDs or CD-R/CDRW in music CD format that can be purchased.
Getting Started Playable file Requirement 1 Getting Started MP3/ WMA music file requirement MP3/ WMA file compatibility with this unit is limited as follows : yy Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA) yy Support Version : v2, v7, v8, v9 yy Maximum files : Under 999 yy File extensions : “.mp3”/ “.
Getting Started 9 Remote control m INFO/DISPLAY: Accesses OnScreen Display. n HOME: Displays the [Home Menu]. DISC MENU: Accesses the menu on a DVD disc. • • • • • • b • • • • • • W/S/A/D (up/ down/ left/ right): Used to navigate on-screen displays. PRESET +/-: Selects programme of Radio. Remove the battery cover on the rear of the Remote Control, and insert one (size AAA) battery with 4 and 5 matched correctly. SPEAKER LEVEL: Sets the sound level of desired speaker.
Getting Started Front panel 1 Getting Started a Disc Tray b Display window Shows the current status of the unit. c Microphone jacks 1/2 d PORT. IN Connects to a portable player with audio outputs. i F (FUNCTION) Changes the input source or function. j -/+(Volume) Adjusts speaker volume. k 1/! (POWER) Switches the unit ON or OFF. e USB Port Connects a USB device. f R (OPEN/CLOSE) Opens or closes the disc tray. g T (PLAY/PAUSE) Starts playback.
Getting Started 11 Rear panel 1 Getting Started a Power cord b Speaker connectors Connects the speaker cables. c Cooling Fan d Antenna Connector FM- Connects the FM wired antenna e AUX (L/R) INPUT Connects to an external source with 2 channel audio outputs. DH6430P-F2.BTWNLLK ENG 0988.indd 11 f VIDEO OUT Connects to a TV with video inputs. g HDMI OUT Connects to TV with HDMI inputs. (Interface for digital audio and video) h OPTICAL IN Connects to optical audio equipment.
Connecting Spekaer installation B. Wall type (Mounting the speakers to a Wall) A. Stand type You can adjust angle of speaker. 2. Attach the stand to the speaker as shown below. 1. Separate the stand from the speaker. 3. You can adjust angle of speaker. 4. Fix the stand to the speaker by rotating the screw. 5. Drive 1 screw in the wall for the speaker and then hook the speaker over there. 2 3 4 5 Connecting 2 yy Separates stand Separate the stand from the speaker as shown below. DH6430P-F2.
Connecting 13 2. Draw the speaker cord through the hole on the base. Preparation Pole 2 Base Connecting Screw Speaker cables 1. Attach the pole to the base, then secure the connection with a supplied screw. ,,Note Make sure speaker cable unfolded or in straight condition before insert it to the hole. DH6430P-F2.BTWNLLK ENG 0988.
Connecting 3. Attach the speakers to the speaker stands by rotating the screws. 4. Connect the speaker wire to the terminal on the speaker. Make sure the wire marked black goes in to the terminal marked “–” (minus) and the other wire goes in to the terminal marked -“+” (plus). 2 Connecting ,,Note Do not catch the speaker cord between the speakers and the pole. DH6430P-F2.BTWNLLK ENG 0988.indd 14 >>Caution Be careful that the speaker does not fall down.
Connecting Attaching the speakers to the unit Speaker Position Grey Rear Rear right Blue Rear Rear left Green Center Center Orange Sub woofer Any front position Red Front Front right White Front Front left 2 To connect the cable to the speakers, press each plastic finger pad to open the connection terminals on the base of each speaker. Insert the wire and release the finger pad. Connecting 1. Connect the wires to the unit.
Connecting Positioning the system The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes. 2 For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening Connecting position ( ).
Connecting Connections to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. ,,Note HDMI Out Connection If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable (Type A, High Speed HDMI™ Cable). Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
Connecting ,,Note yy If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output. yy When you connect a HDMI or DVI compatible device make sure of the following: 2 Connecting - Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/ DVI device and leave it for around 30 seconds, then switch on this unit. - The connected device’s video input is set correctly for this unit.
Connecting 19 Video Connection Resolution Setting Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. The unit provides several output resolutions for HDMI OUT. You can change the resolution using [Setup] menu. You can hear the sound through the system’s speakers. 1. Press n HOME. 2. Use A/D to select the [Setup] and press b ENTER. The [Setup] menu appears. 2 Unit Connecting 3. Use W/S to select [Display] option then press D to move to the second level. 4.
Connecting 2 Video Output Resolution Optional Equipment Connection Displayed resolution in display window and outputted resolution may different according to connection type. AUX In Connection [HDMI OUT] : 1080p, 1080i, 720p and 480p (or 576p) and 480i (or 576i) Connect an Output of auxiliary device to the AUX (L/R) INPUT Connector. [VIDEO OUT] : 480i (or 576i) Connecting Unit To the audio output jacks of your component (TV, VCR, etc.
Connecting AUDIO (PORT. IN) In Connection Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. 21 USB Connection Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. 2 Connecting MP3 player, etc... ,,Note Removing the USB Device from the unit 1. Choose a different function mode or press Z STOP twice in a row. 2. Remove the USB device from the unit.
Connecting Compatible USB Devices OPTICAL In connection yy MP3 Player : Flash type MP3 player. Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN connector. yy USB Flash Drive : Devices that support USB2.0 or USB1.1. yy The USB function of this unit does not support some USB devices. USB device requirement 2 Connecting yy Devices which require additional program installation connected to a computer, are not supported. yy Do not extract the USB device while in operation.
Connecting 23 Home theater speaker ez setup Antenna Connection Listen to sound from TV, DVD and Digital Device with 5.1(2.1 or 2)ch mode. Even in power off mode, if you press OPTICAL, then power is on and automatically changed to AUX OPT mode. Connect the supplied FM antenna for listening to the radio. Connect the FM Wire antenna to the FM antenna connector. 1. Connect the unit’s OPTICAL IN jack to jack on optical out of your TV (or Digital Device etc.). 2 Connecting 2.
System Setting Adjust the setup settings By using the Setup menu, you can make various adjustments to items such as picture and sound. To display and exit the Setup menu 1. Press n HOME. Displays the [Home Menu]. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 24 to 28.
System Setting 25 Language Menu Language Select a language for the Setup menu and then on screen display. Disc Audio / Disc Subtitle / Disc Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] Refers to the original language in which the disc was recorded. To select another language, press numeric buttons and then b ENTER to enter the corresponding 4-digit number according to the language code list on the page 41.
System Setting Audio 5.1 Speaker Setup Make the following settings for the built-in 5.1 channel surround decoder. [Speaker] Select a speaker that you want to adjust. ,,Note Certain speaker settings are prohibited by the Dolby Digital licensing agreement. 1. Select [5.1 Speaker Setup] on the [Audio] menu. 2. Press b ENTER. The [5.1 SPEAKER] appears. [Size] Since the speaker settings are fixed, you cannot change the settings. [Volume] Adjust the output level of each speaker.
System Setting 27 DRC (Dynamic Range Control) Lock (Parental Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Initial Setting the Area Code: Vocal When you use this unit for the first time, you have to set the Area Code. Select [On] to mix karaoke channels into normal stereo. 1. Select the [Lock] menu and then press D. This function is effective for multi-channel karaoke DVDs only.
System Setting Password Others You can enter or change password. 1. Select [Password] on the [Lock] menu and then press D. 2. Press b ENTER. 3. Input a password and press b ENTER. To change the password, press b ENTER when the [Change] option is highlighted. Input a password and press b ENTER. Enter it again and press b ENTER to verify. 4. Press n HOME to exit the menu. ,,Note 3 If you forget your password, you can clear it using the following steps: System Setting 1.
Operating 29 Using the Home Menu Basic Operations 1. Press n HOME. Displays the [Home Menu]. 1. Insert the disc by using the B OPEN/CLOSE or Connect the USB device to the USB port. 2. Press n HOME. Displays the [Home Menu]. 2. Select an option by using AD. 3. Press b ENTER then selected option menu. 3. Select an option by using AD. If you select the [Movie], [Photo] or [Music] option when you connect up to two devices, it appears as belows. Select a media then press b ENTER.
Operating To Stop Do this Playback Press d PLAY, MONO/ STEREO. Pause Press M PAUSE/STEP. Press M PAUSE/STEP Frame-byrepeatedly to play title FrameFrame playback by-Frame. (DVD, DivX only) During playback, press C/ V SKIP to go to the next Skipping to the chapter/ track/ file or to next/ previous return to the beginning of the chapter/ track/ current chapter/ track/ file. file Press C SKIP twice briefly to step back to the previous chapter/ track/ file.
Operating To display the DVD Menu r When you play a DVD which contains several menu, you can select the menu you want using the Menu. 1. Press DISC MENU. The disc’s menu appears. 2. Select the menu by using WSAD. 3. Press d PLAY, MONO/STEREO to confirm. To display the DVD title r When you play a DVD which contains several title, you can select the title you want using the Menu. 1. Press TITLE. The disc’s title appears. 2. Select the menu by pressing WSAD. 3. Press d PLAY, MONO/STEREO to confirm. r The 1.
Operating Marked Playback ut The mark function enables you to store your favourite files from any disc or USB device in the unit memory. 1. Select [Music] on the [Home Menu]. Returning to the upper folder. (MP3/ WMA only) File information will be displayed according to the ID3TAG information on the appropriate music file. (MP3 only) To delete a Marker 1. Use WS to select the track that you wish to erase from the marked file. 2. Press MARKER.
Operating 33 Viewing a PHOTO file About help menu in the full screen Menu Buttons Operation Menu m INFO/ DISPLAY Displaying the Option menu. a/d Prev./ Next A/D Moving to another file. i This unit can play discs with photo files. 1. Select [Photo] on the [Home Menu] and press b ENTER. Moving to the previous or next file list. x x RETURN List Returning to the [Photo] menu. Options while viewing a photo You can use various options during viewing a photo in full screen. 1.
Operating Sleep Timer Setting System Select - Optional Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. You must select the appropriate system mode for your TV system. Press and hold M PAUSE/STEP for more than five seconds to be able to select a system in the [Home Menu]. To check the remaining time, press SLEEP.
Operating 35 Radio Operations Be sure that FM aerials are connected. (Refer to the page 23.) Listening to the radio 1. Press P RADIO&INPUT until FM appears in the display window. The last received station is tuned in. 2. Press and hold TUNING (-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station. Deleting a saved station 1. Press PRESET - / + to select a preset number you want to delete. 2.
Operating Sound adjustment ,,Note Setting the surround mode yy In some of surround modes, some speakers, there’s no sound or low sound. It depends on the mode of surround and the source of audio, it is not defective. This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT. yy You may need to reset the surround mode, after switching the input, sometimes even after the sound track changed.
Operating 37 Advanced Operations ,,Note Recording to USB yy You can check the recording percentage rate for the USB record on the screen during the recording. (Audio CD or MP3/ WMA CD only) You can record music or sound souce to USB device by connecting in to the port on the unit. yy During recording MP3/WMA, there is no sound. 1. Connect the USB device to the unit. yy When you stop recording during playback, the file that has been recorded at that time will be stored. (Audio CD only) 2.
Troubleshooting Troubleshooting PROBLEM No power No picture CORRECTION Plug the power cord into the wall outlet securely. Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. Connect the video cables securely to both the TV and unit. Select the correct input mode of the unit so you can hear the sound from the unit. There is little or no sound Connect the audio cables into the connection terminals correctly. Replace with a new audio cable.
Appendix 39 Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.
Appendix Area Code List Choose an area code from this list.
Appendix 41 Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Trademarks and Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
Appendix 43 Specifications General Power requirements Refer to main label. Power consumption Refer to main label. Dimensions (W x H x D) (360 x 60.5 x 299) mm without foot Net Weight (Approx.) 2.66 kg Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Bus Power Supply DC 5 V 0 500 mA Inputs/ Outputs VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 HDMI OUT (video/audio) 19 pin (Type A, HDMI™ Connector ) ANALOG AUDIO IN 2.
Appendix Front Speaker Type 1 way 1 speaker Impedance Rated 3Ω Input Power 167 W Max. Input Power 334 W Net Dimensions (W x H x D) (250 x 1100 x 250) mm Net Weight 3.5 kg Rear Speaker Type 1 way 1 speaker Impedance Rated 3Ω Input Power 167 W Max. Input Power 334 W Net Dimensions (W x H x D) (88 x 122 x 81) mm Net Weight 0.5 kg Centre Speaker 6 Type 1 way 1 speaker Impedance Rated 3Ω Input Power 167 W Max.
DH6430P-F2.BTWNLLK ENG 0988.
親愛的顧客您好: 感謝您對 LG 產品的愛護與支持 為提供您更快速便捷的產品諮詢及報修服務 為您準備了全新的 “ 瞬間感動 LG 售後服務“ 服務內容 : 微笑服務,貼心售後 一等服務,感動客戶 一通電話,不用等待,不用催修 請洽 瞬間感動 LG 售後服務專線: 0800-898-899 LG 網址 : http:// www.lg.com/tw 台灣樂金電器股份有限公司 DH6430P-F2.BTWNLLK ENG 0988.