OWNER’S MANUAL DVD Home Theater System Please read this manual carefully before operating your set and retain it for future reference. DH6520T (DH6520T, S62T1-S/ C, S62S1-W) DH6520T-F2.DCHNLL_ENG.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players.
Table of Contents Table of Contents 1 Getting Started 2 6 6 6 6 6 6 7 7 7 7 7 8 9 10 11 Safety Information Unique Features – Portable In – USB Direct Recording – Full HD up-scaling – Home Theater Speaker ez Setup Accessories Introduction – Playable Discs – About the “&” Symbol Display – Symbols Used in this Manual – Regional Codes Playable file Requirement Remote control Front panel Rear panel 2 Connecting 12 14 15 16 16 17 18 19 19 20 20 20 20 Assembling the speaker Attaching the speakers to the
Table of Contents 5 Troubleshooting 37 Troubleshooting 6 Appendix 38 38 38 39 40 41 42 Maintenance – Handling the Unit – Notes on Discs Area Code List Language code List Trademarks and Licenses Specifications 5 1 2 3 4 5 6 DH6520T-F2.DCHNLL_ENG.
Getting Started Unique Features 1 Portable In Accessories Please check and identify the supplied accessories. Getting Started Listens to music from your portable device. (MP3, Notebook, etc) USB Direct Recording Records music from CD to your USB device. Remote control (1) Battery (1) FM antenna (1) HDMI Cable (1) Video cable (1) Speaker cables (6) Full HD up-scaling Views Full HD picture quality with simple setup.
Getting Started Introduction Playable Discs DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented. DVD±R (8 cm / 12 cm disc) Video mode and finalized only. DVD-RW (8 cm / 12 cm disc) Video mode and finalized only. DVD+R: Video mode only Supports the double layer disc also.
Getting Started Playable file Requirement 1 Getting Started MP3/ WMA music file requirement MP3/ WMA file compatibility with this unit is limited as follows : yy Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA) yy Support Version : v2, v7, v8, v9 yy Maximum files : Under 999 yy File extensions : “.mp3”/ “.
Getting Started 9 Remote control m INFO/DISPLAY (快捷菜单): Accesses On-Screen Display. n HOME (主菜单): Displays the [Home Menu]. DISC MENU (光碟菜单): Accesses the menu on a DVD disc. • • • • • • b • • • • • • W/S/A/D (up/ down/ left/ right): Used to navigate on-screen displays. PRESET (预设) +/-: Selects programme of Radio. TUNING (调谐) +/-: Tunes in the desired radio station. Z STOP (停止): Stops playback. • • • • • • a • • • • • • M PAUSE/STEP (暂停/步距): Pauses playback. DH6520T-F2.DCHNLL_ENG.
Getting Started Front panel 1 Getting Started 2 1 3 4 5 a Disc Tray b Display window Shows the current status of the unit. c Microphone jacks 1/2 d PORT. IN Connects to a portable player with audio outputs. e USB Port Connects a USB device. f R (OPEN/CLOSE) Opens or closes the disc tray. DH6520T-F2.DCHNLL_ENG.indd 10 6 7 8 9 10 11 g T (PLAY/PAUSE) Starts playback. Pauses playback temporarily, press again to exit pause mode. h I (STOP) Stops playback.
Getting Started 11 Rear panel 1 2 3 4 5 6 7 a Power cord b Speaker connectors Connects the speaker cables. c Cooling Fan d Antenna Connector FM- Connects the FM wired antenna e VIDEO OUT Connects to a TV with video inputs. DH6520T-F2.DCHNLL_ENG.indd 11 Getting Started 1 8 9 f COMPONENT VIDEO (Y PB PR)OUTPUT Connects to a TV with Y PB PR inputs. g AUX (L/R) INPUT Connects to an external source with 2 channel audio outputs. h OPTICAL IN Connects to optical audio equipment.
Connecting Assembling the speaker 2. Secure the connection with a supplied screw. When assembling, be careful that the pole and base do not fall down. Step 2 Preparation Pole 2 Connecting Base Screw Speaker Speaker cables 3. Attach the speaker to the pole, then secure the connection with a supplied screw. Step 3 1. Attach the base to the pole. Be careful with the orientation of the pole and base, as in the illustration. Step 1 DH6520T-F2.DCHNLL_ENG.
Connecting 4. Thread the speaker wire through the hole in the bottom of the base. Step 4 13 >>Caution Be careful that the speaker does not fall down. Otherwise it may result in the speaker malfunctioning and causing personal injury and/ or property damage. 2 Connecting Bottom of base 5. Connect the speaker wire to the connector on the speaker. Step 5 DH6520T-F2.DCHNLL_ENG.
Connecting Attaching the speakers to the unit 2 Connecting 1. Connect the wires to the unit. Match each wire’s colored band to the same colored connection terminal on the rear of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.
Connecting Positioning the system The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening B G A A A D Surround left speaker (L)/ Surround right speaker (R): Place these speakers behind your listening position, facing slightly inwards.
2 Connecting Connections to Your TV Component Video Connection Make one of the following connections, depending on the capabilities of your existing equipment. You can hear the sound through the system’s speakers. Connect the COMPONENT VIDEO OUTPUT jacks on the unit to the corresponding input jacks on the TV using component cables. ,,Note Connecting yy Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player.
Connecting 17 ,,Note HDMI Out Connection If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable (Type A, High Speed HDMI™ Cable). Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). yy If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output.
Connecting Video Connection Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. 2 Unit Connecting TV Yellow DH6520T-F2.DCHNLL_ENG.
Connecting Resolution Setting The unit provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press n HOME.(主菜单). 2. Use A/D to select the [Setup] and press b ENTER (确定) The [Setup] menu appears. 19 Video Output Resolution Displayed resolution in display window and outputted resolution may different according to connection type.
Connecting Optional Equipment Connection PORT. IN (PORTABLE) In Connection Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. AUX In Connection Connect an Output of auxiliary device to the AUX (L/R) INPUT Connector. 2 Connecting Unit MP3 player, etc... Listening to music from your portable player or external device To the audio output jacks of your component (TV, VCR, etc.
Connecting USB Connection Compatible USB Devices Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. yy MP3 Player : Flash type MP3 player. 21 yy USB Flash Drive : Devices that support USB2.0 or USB1.1. yy The USB function of this unit does not support some USB devices. USB device requirement yy Do not extract the USB device while in operation. Removing the USB Device from the unit 1.
Connecting OPTICAL In connection Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN connector. Antenna Connection Connect the supplied FM antenna for listening to the radio. Connect the FM Wire antenna to the FM antenna connector. 2 Connecting To the digital optical output jack of your component Home theater speaker ez setup Listen to sound from TV, DVD and Digital Device with 5.1(2.1 or 2)ch mode.
System Setting 23 Adjust the setup settings By using the Setup menu, you can make various adjustments to items such as picture and sound. To display and exit the Setup menu 1. Press n HOME (主菜单). Displays the [Home Menu]. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 23 to 27. OSD Initial language settings - Optional 1. Press 1 (电源) (POWER) to turn the unit on. The language setup menu will appear on the screen. 3.
System Setting Language Menu Language Select a language for the Setup menu and then on screen display. Disc Audio/ Disc Subtitle/ Disc Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] 3 Refers to the original language in which the disc was recorded. System Setting [Other] To select another language, press numeric buttons and then b ENTER (确定) to enter the corresponding 4-digit number according to the language code list on the page 40.
System Setting 25 Audio 5.1 Speaker Setup Make the following settings for the built-in 5.1 channel surround decoder. [Speaker] Select a speaker that you want to adjust. ,,Note Certain speaker settings are prohibited by the Dolby Digital licensing agreement. 1. Select [5.1 Speaker Setup] on the [Audio] menu. 2. Press b ENTER (确定). The [5.1 SPEAKER] appears. [Size] Since the speaker settings are fixed, you cannot change the settings. [Volume] Adjust the output level of each speaker. 3.
System Setting DRC (Dynamic Range Control) Lock (Parental Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Initial Setting the Area Code: Vocal When you use this unit for the first time, you have to set the Area Code. Select [On] to mix karaoke channels into normal stereo. 1. Select the [Lock] menu and then press D. This function is effective for multi-channel karaoke DVDs only.
System Setting 27 Password Others You can enter or change password. 1. Select [Password] on the [Lock] menu and then press D. 2. Press b ENTER (确定). 3. Input a password and press b ENTER (确定). To change the password, press b ENTER (确定) when the [Change] option is highlighted. Input a password and press b ENTER (确定). Enter it again and press b ENTER (确定) to verify. 4. Press n HOME (主菜单) to exit the menu.
Operating Using the Home Menu Basic Operations 1. Press n HOME (主菜单). Displays the [Home Menu]. 1. Insert the disc by using the B OPEN/CLOSE (开/关仓) or Connect the USB device to the USB port. 2. Press n (主菜单). Displays the [Home Menu]. 2. Select an option by using AD. 3. Press b ENTER (确定) then selected option menu. 3. Select an option by using AD. If you select the [Movie], [Photo] or [Music] option when you connect up to two devices, it appears as belows. Select a media then press b ENTER (确定).
Operating 29 To Stop Playback Pause Do this Other Operations Press Z STOP (停止). Press d PLAY, MONO/STEREO (播放, 单声道/立体声).. Press M PAUSE/STEP (暂停/ 步距).. Press M PAUSE/STEP (暂停/ Frame-by步距 repeatedly to play title Frame playback Frame-by-Frame. (DVD, DivX only) Displaying Disc Information on-screen You can display various information about the disc loaded on-screen. 1. Press m INFO/DISPLAY (快捷菜单) to show various playback information.
Operating To display the DVD Menu Starting play from selected time r ry When you play a DVD which contains several menu, you can select the menu you want using the Menu. To start playing at any chosen time on the file or title. 1. Press DISC MENU (光碟菜单). The disc’s menu appears. 1. Press m INFO/DISPLAY (快捷菜单) during playback. 2. Select the menu by using WSAD. 2. Press WS to select the time clock icon and “--:--:--” appears. 3. Press d PLAY, MONO/STEREO (播放, 单声道 /立体声) to confirm.
Operating Marked Playback ut The mark function enables you to store your favourite files from any disc or USB device in the unit memory. 1. Select [Music] on the [Home Menu]. Returning to the upper folder. (MP3/ WMA only) File information will be displayed according to the ID3TAG information on the appropriate music file. (MP3 only) 31 To delete a Marker 1. Use WS to select the track that you wish to erase from the marked file. 2. Press MARKER (标记).
Operating Viewing a PHOTO file About help menu in the full screen i This unit can play discs with photo files. 1. Select [Photo] on the [Home Menu] and press b ENTER (确定). Moving to the previous or next file list. Menu Buttons Menu m INFO/DISPLAY (快捷菜单) a/d Prev./ Next A/D x x RETURN (返回) List Operation Displaying the Option menu. Moving to another file. Returning to the [Photo] menu. Options while viewing a photo You can use various options during viewing a photo in full screen. 4 1.
Operating 33 Sleep Timer Setting Press SLEEP (睡眠) one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. To check the remaining time, press SLEEP (睡眠). To cancel the sleep function, press SLEEP (睡眠) repeatedly until “SLEEP 10” appears, and then press SLEEP (睡眠) once again while “SLEEP 10” is displayed. ,,Note You can check the remaining time before the unit turns off. Press SLEEP The remaining time appears in the display window. Dimmer Press SLEEP (睡眠) once.
Operating Radio Operations Be sure that both FM aerials are connected. (Refer to the page 22.) Listening to the radio 1. Press P RADIO&INPUT (输入) until FM appears in the display window. The last received station is tuned in. 2. Press and hold TUNING (调谐) (-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station. Deleting a saved station 1. Press PRESET (预设) - / + to Select a preset number you want to delete. 2.
Operating 35 Sound adjustment Setting the surround mode This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT (音效). You can change the SOUND EFFECT (音效) using AD arrow key while the sound effect information is displayed on. The displayed items for the equalizer maybe different depending on sound sources and effects. Description NAT PLUS The NAT PLUS is Natural Plus sound effect. You can enjoy the natural sound effect same as a 5.1-channel.
Operating Advanced Operations Recording to USB You can record music or sound source to USB device by connecting the USB to the port on the unit. 1. Connect the USB device to the unit. 2. Select a mode in which you want to record. Play back a sound source first. 3. Start the recording by pressing X REC (录音). 4. To stop recording, press Z STOP (停止). [All tracks/ files recording] Record to USB in stop or play mode.
Troubleshooting 37 Troubleshooting PROBLEM No power No picture CORRECTION Plug the power cord into the wall outlet securely. Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. Connect the video cables securely to both the TV and unit. Select the correct input mode of the unit so you can hear the sound from the unit. There is little or no sound Connect the audio cables into the connection terminals correctly. Replace with a new audio cable.
Appendix Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.
Appendix 39 Area Code List Choose an area code from this list.
Appendix Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Trademarks and Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. 41 What is SIMPLINK? Some functions of this unit are controlled by TV’s remote control when this unit and LG TV with SIMPLINK are connected through HDMI connection. Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc. yy Refer to the TV owner’s manual for the details of SIMPLINK function.
Appendix Specifications General Power requirements Refer to main label. Power consumption Refer to main label. Dimensions (W x H x D) (360 x 60.5 x 297) mm without foot Net Weight (Approx.) 2.7 kg Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Bus Power Supply (USB) DC 5 V 0 500 mA Inputs/ Outputs VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 (Pb)/(Pr) 0.
Appendix 43 Front Speaker Type 1 way 1 speaker Impedance Rated 3Ω Input Power 141 W Max. Input Power 282 W Net Dimensions (W x H x D) 250 x 1100 x 250 mm Net Weight 3.4 kg Rear Speaker Type 1 way 1 speaker Impedance Rated 3Ω Input Power 141 W Max. Input Power 282 W Net Dimensions (W x H x D) 250 x 1100 x 250 mm Net Weight 3.4 kg Centre Speaker Type 1 way 1 speaker Impedance Rated 3Ω Input Power 141 W Max.
DH6520T-F2.DCHNLL_ENG.
