DK4921P DVD PLAYER OWNER'S MANUAL MODEL : DK4921P Before connecting, operating please read this instruction booklet or adjusting this product, carefully and completely.
PAGE 2 Safety WARNING: INTRODUCTION Precautions TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: THIS DVD PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE, SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.
INTRODUCTION PAGE 3 Table of Contents Introduction Advanced SafetyPrecautions........................2 Usingatitlemenu.......................21 TableofContents.........................3 UsingaDVDmenu......................21 Precautions.............................4 Operation Memorizing Settings for Viewed DVDs NotesonDiscs..........................5 (LastConditionMemory)..................22 IdentificationofControls..................6-9 Changingsubtitlelanguage................
PAGE 4 INTRODUCTION Precautions Notes Notes handling on When shipping the DVD player, always use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD player. Do not leave rubber or plastic products in contact with the DVD player for a long time. They will leave marks on the finish.
INTRODUCTION Notes on Discs This section shows you how to On PAGE 5 handle, clean, and store discs. On Discs Handling Do not touch the playback side of the disc. Storing Discs Do not store discs in direct sunlight Do not store discs in place subject a or near heat places subject moisture and dust such near a to sources. as a to bathroom or humidifier. Store discs vertically in a case. Stacking placing objects on discs outside of their case may cause warping.
DK4921P PAGE 6 INTRODUCTION Identification of Controls Front Panel 12 34 5 6 8 7910 POWER 111213 1 POWER button 7 OPEN/CLOSE button 2 STANDBY indicator 8 PAUSE/STEP button Power ON mode: Green color, 9 STOP button Standby mode: 10 SKIP/SCAN buttons Red color 3 Display 4 Disc tray 12 Microphone volume controls 5 Remote 13 Echo level control 6 PLAY button Display 11 Microphone input terminals window sensor Window Operating status DVD indicator PROGRAM indicator RAN
INTRODUCTION PAGE 7 Identification of Controls Rear Panel COAXIAL DIGITAL AUDIO OUT AUDIO OUT 2 jack (L/R) jacks COMPONENT VIDEO OUT AUDIO OUT 1 TV SYSTEM SELECT Switch Refer to explanation jacks (L/R) jacks below.
DK4941P PAGE 8 INTRODUCTION Identification of Controls (con'd) REMOTE CONTROL You will find instructions for each of the remote control functions in the appropriate sections of this appropriate sections of this instruction manual. You will find instructions for each of the remote control functions in the instruction manual.
INTRODUCTION Identification of Controls Preparing (con'd) the Remote Control Insert the batteries into the remote control use it to PAGE 9 so you Operating can with the Remote Control This section shows you how to use the remote control. operate the DVD player. Point the remote control at the Open 1 the battery remote cover. sensor and press the buttons. POWER Insert batteries 2 Make (AAA size).
PAGE 10 CONNECTIONS Connecting Connect the DVD to TV a player to your TV VIDEO OUTPUT Audio/Video cable SELECT Switch DIGITAL AUDIO COMPONENT AUDIO OUT OUT2 VIDEO OUT OUT1 COAXIAL L Pb L R Pr (supplied) S-VIDEO R To AUDIO OUT COMPONENT VIDEO OUTPUT Y S-VIDEO (L/R)/VIDEO OUT VIDEO OUT OUT To S-VIDEO OUT To COMPONENT VIDEO OUT IftheTVhasan S-video input, connect the For DVD the player with supplied using COMPONENT signals, set the "VIDEO OUTPUT" switch to "COMPONEN
CONNECTIONS Connecting You can to an Audio PAGE 11 System listen to the sound of audio CDs and DVD video discs in stereo. DIGITAL AUDIO COMPONENT AUDIO OUT OUT2 VIDEO OUT OUT1 COAXIAL P S-video cable To S-VIDEO OUT L DIGITAL S-VIDEO OUT If the TV has R Pr S-video an COMPONENT AUTO PAL VIDEO OUTPUT OPTICAL NTSC To AUDIO OUT S-VIDEO OUT Y player VIDEO OUT input, connect the DVD with the S-video cable.
PAGE 12 CONNECTIONS Connecting to Optional Audio System Enjoying Dolby Digital Sound You can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro and 2 Channel Logic, Digital Stereo. Dolby Digital Dolby Digital is the surround sound technology used in theatres showing the latest movies, and is now available to reproduce this realistic effect in the home.
CONNECTIONS Connecting to Optional Enjoying Dolby A/V System Logic Surround Sound Logic Surround enjoy the excitement of Surround Sound receiver has a Dolby Pro Logic decoder. Refer to Dolby You Pro Audio PAGE 13 Pro can still if your A/V receiver does not offer connection diagram.
PAGE 14 CONNECTIONS Connecting Enjoying to Audio Optional 2 Channel System Digital Stereo Sound 2 Channel Digital Stereo enjoy the dynamic sound of 2 Channel Digital Stereo by connecting digital audio input and speaker system (right and left front speakers).
BASIC OPERATION Basic PAGE 15 Playback This section shows you the basics on how to play back DVD video disc. a Preparations When you want to play back DVD video discs, turn on the TV and select the video input source connected to the DVD player.
PAGE 16 Basic BASIC OPERATION Playback Press D/E/F/G and press SELECT/ENTER, press the numeric button(s), to select the 5 or desired item. 1 2 PWR MAK SAC AUOSUB ANG OM AN OR 34 S N POGAM Play 123 of the selected item begins. now CA 456 For further information, also refer to the 789 PLAY SKIP the disc you 0 After STOP SLOW DISPLAY PA AB of UP KAAOK operation PAUSE/STEP When the unit is SELECT/ENTER POWER to turn off the power.
BASIC OPERATION Basic PAGE 17 Playback Stopping Play Press STOP during playback. Resume PWR MAK SAC AUOSUB ANG OM AN When play STOP was Press POGAM 123 0 PLAY stopped, point where pressed (RESUME function). PLAY and play will resume from this point. PAUSE/STEP ZOOM SLOW SELECT/ENTER DISPLAY pressed on the STOP mode.
PAGE 18 Basic You can BASIC OPERATION Playback play back discs at various speeds. To Scan at fast forward reverse PWR MAK SAC AUOSUB ANG Press and hold SKIP S N fast playback. or button during playback. OM AN or POGAM [TV screen] 123 CA FF X2 456 789 GG X2 0 PLAY PLAY SKIP SKIP FWD/REV STOP PAUSE/STEP ZOOM SLOW SELECT/ENTER DISPLAY SKIP The (reverse) is relatively slow at first. pressed again, the speed becomes faster.
OPERATION USING GUI MENU ICONS General Information about GUI menu icons This unit features GUI Menu Icons showing disc (title/chapter/track number, elapsed playing time, audio/subtitle language, angle, and sound) and player information (repeat play, play mode, marker, etc.). Some icons only show the indicated information. Other icons allow the settings to be changed. Common procedures information Press DISPLAY 1 Title function MAK SAC AUOSUB can during playback.
PAGE 20 OPERATION USING GUI MENU ICONS Detailed You can of each GUI description view information about Press DISPLAY a disc and its operational icon status during on the TV screen. FUNCTION playback. (Press D/E DVD GUI [TV screen] menu SELECTION to select desired item) To show the current title No. and to 1 F/G, to the desired title No. jump METHOD or Numeric SELECT/ENTER To show the current 1 and to chapter to the desired jump F/G, No. chapter No.
ADVANCED OPERATION Using a title menu Some movie discs may contain two or more titles. If the disc has a title menu recorded on it, the TITLE button can be used to select the movie title. depending details of (The on the disc operation used.) Selecting a title may not be certain DVD discs. PLAY SKIP 1 STOP possible Pressing ? AB Resume play DVD may Press D/E/F/G and press SELECT/ENTER PLAY, or press the numeric button(s), to For STOP SLOW starts playing. AB UP during play.
PAGE 22 ADVANCED OPERATION Memorizing Settings (Last Condition Memory) for Viewed DVDs This unit stores, in memory, settings for DVDs you have watched. Settings remain in memory You even if you remove the disc from the player, or switch power to OFF.
ADVANCED OPERATION Changing subtitle language It is possible to change the subtitle language to a language from the one selected at the initial settings. (See page 32 for further info.) This operation works only with discs on which multiple subtitle languages are recorded. 1 different PWR SAC MAK AUOSUB 1,2 ANG Press SUBTITLE during playback. OFF S N OM AN 2 POGAM Press repeatedly SUBTITLE until language is selected. cases, the subtitle the selected on language being played back.
PAGE 24 ADVANCED OPERATION from another Viewing Some DVDs may contain simultaneously from shot For these discs, the angle which have been scenes a number of different angles. be viewed from same scene can each of these different (The recorded used.) angles using the ANGLE button. differ angles depending on the disc Press ANGLE 1 Number of angle being played back. 2 1 2 during playback. 1 Press ANGLE repeatedly desired is selected.
ADVANCED OPERATION PAGE 25 Repeat Play Repeating sections between specific points (A-B repeat) Repeating viewing (listening) Press REPEAT during playback. Each time this button is pressed, the TV screen changes as shown below and the disc will repeat chapter or title (DVD) or a track (VCD/CD). ? a 1 Press A-B during play repeat play is to start at the two point where (A).
PAGE 26 Storing ADVANCED OPERATION markers in memory to be viewed Storing a MARKER in the DVD memory is similar marking your page in a book. It allows you to quickly return to any point on the disc. to (listened to) again Storing marker in the memory a Press MARKER 1 point during play at the starting (listened to) again. to be viewed 1/5 Indicates "1/5" is stored in the memory. to 5 markers can be stored in the memory.
ADVANCED OPERATION PAGE 27 Zoom feature The Zoom feature allows you to "ZOOM-IN" and enlarge the picture on the screen to either 4 times or 16 times (X16) (X4) 1 Press ZOOM during playback. still its normal size. ? normal playback or The square frame will be displayed in the centre of picture. If no button is pressed for more than 10 the PLAY ? STOP 1, 3 seconds, the square frame will disappear.
PAGE 28 ADVANCED OPERATION Program play The player plays the specify. tracks the disc in on an Note: Program play Press PROGRAM 1 order you during playback or stop mode. function is possible only The program with Audio CDs and VCD. It does not work with playback screen appears the TV on screen. DVD movie discs and VCD with PBC. Program 1 Step Total Time 00:00 PWR MAK SAC AUOSUB ANG S N Clear All OM AN ? POGAM 123 CA 1 PROGRAM.
ADVANCED OPERATION PAGE 29 with MP3 Playback To 789 PLAY SKIP 0 4 SKIP play a Load 1 MP3 file STOP ZOOM SLOW DISPLAY MP3 disc. an The MP3 menu is displayed. PAUSE/STEP MP3 SELECT/ENTER Program ABCD 2,4 MP3-1 MP3-2 2,3 MP3-3 MP3-4 MP3-5 MP3-6 MP3-7 MP3-8 MP3-9 Clear All Press D/E buttons to select the 2 MP3 files that you want to play then press SELECT/ENTER. MP3 directory are where located and Program MP3-1 ..
PAGE 30 ADVANCED OPERATION Playback with MP3 To program PWR SAC MAK AUOSUB ANG play an MP3 file S N 1 Follow steps 1 to 2 2 Select on previous page. OM AN POGAM 3 123 CA 456 an MP3 file to program with D/E. MP3 Program MP3-1 789 4 0 ..
ADVANCED OPERATION PAGE 31 KARAOKE 1 Load 2 Set the MIC VOL control to the minimum level to 3 Connect 4 Press PLAY to start STANDBY POWER 3 2,5 5 a karaoke disc. prevent acoustic feedback (e.g. a loud howling sound) before connecting the microphone. microphone a to MIC1 or MIC2 or to both sockets. playback. Adjust MIC VOL and ECHO VOL then sing a song. If you want to set KARAOKE PWR MAK SAC AUOSUB option control and follow step 6~7.
PAGE 32 INITIAL SETTINGS Selection of initial settings Once the initial settings have been completed, always be operated under the same conditions (especially with DVD discs). The settings will be retained in the memory until they are changed, even if the power is switched the player Selection of initial settings can 1 Press SETUP in the stop The SETUP menu is or playback mode. displayed. off.
INITIAL SETTINGS Selecting disc languages This is to select the audio soundtrack language, language used in title menus or DVD menus which will always be used for every disc to be played back. subtitle language PAGE 33 and the At the setup screen, press D/E to select 1 "Disc Audio" and press G. When you play back a DVD video disc, the DVD player automatically displays the pre-selected subtitle language if it is included on the disc.
PAGE 34 INITIAL SETTINGS level and Selecting rating This is to prohibit DVDs which are the playing of password specified Selecting rating unsuitable for children. Some DVD discs contain a which enables remove scenes or to parents restriction level 1 prevent playback of discs by children. DVD players are equipped with a password designed to prevent children changing level (DVD only) At the SETUP screen, press D/E to select "Rating" and press G.
INITIAL SETTINGS level and Selecting rating PAGE 35 password Setting password (DVD only) your If you PWR MAK SAC AUOSUB ANG change the rating level to "7" or lower, you a 4-digit "password" to prevent playback of discs ratings. S N must enter with higher OM AN At the SETUP screen, press E to select 1 POGAM "Password" and press G.
PAGE 36 INITIAL SETTINGS Selecting Select the TV Aspect appropriate type according screen your TV set; conventional size wide-screen (16:9). PWR MAK screen SAC (4:3) to 1 or At the SETUP screen, press D/E to select "TV and press G.
INITIAL SETTINGS Selecting Selects on Menu Language for DVD language menus and displays the TV. 1 At the SETUP screen, press D/E to select "Menu PWR MAK AUOSUB PAGE 37 SAC ANG Language" and press G.
PAGE 38 Others INITIAL SETTINGS (DRC/PBC/Pseudo PAL) The DRC, PBC and Pseudo PAL settings can be At the SETUP screen, press D/E to select 1 changed. "Others" and press G.
INITIAL SETTINGS Audio Selecting Digital Output Each DVD disc has a variety of audio output options. Set the player's Digital Audio Output according to the type of audio system you use. PWR PAGE 39 At the SETUP screen, press D/E to select Digital Audio Output and press G.
PAGE 40 Table of Enter the INITIAL SETTINGS Language appropriate Code and Their Abbreviations code number for the initial Language Code settings "Audio", Language "Subtitle" and/or "Menu" Code 6565 Afar 7079 Faroese 7678 6566 Abkhazian 7082 French 7679 6570 Afrikaans 7089 Frisian 6577 Ameharic 7165 6582 Arabic 6583 Language (See page Code 32).
REFERENCE Disc Information Requirements/Copyright Playable This DVD Discs player can play back the discs. following Disc mark Disc size Contents 12 cm Audio+Video DVD video discs (moving pictures) 8cm 12 Video CDs 12 Audio CDs can You cannot can not be playback Approx. 4 hours Approx. 8 hours Approx. 80 minutes Approx.
PAGE 42 Before REFERENCE Calling Service Personnel and Correction Symptoms Check the following guide for the possible cause of a problem before contacting Cause Symptom Correction No power. ? The power cord is disconnected. ? The power is on, but the DVD player does ? No disc is inserted. ? Plug the power securely. Insert a disc. cord into the wall outlet (Check that the DVD or, audio CD indicator in the DVD not work. No service. display is lit.) picture.
REFERENCE PAGE 43 Specifications DVD Power supply AC 110-240V, 50/60Hz Power consumption 16W Mass 3.0 External dimensions [DVplayer] (W X H X D) x 88 x 247 mm (17" X 3.5" X Laser Semiconductor laser, Frequency range ratio Audio range dynamic Video (digital audio) (digital audio) (digital audio) conditions video More than 95 dB 650 1.0 V output (p-p), (EIAJ) (EIAJ) (less 5°C to 35°C, 75 Ω, negative (Y) 1.0 V (p-p), 75 Ω, (C) 0.3 V (p-p), 75 Ω (Y) 1.
PAGE 44 REFERENCE SAFETY PRECAUTION THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS POWER SUPPLY WHEN IT IS NOT IN USE. DO NOT ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USER SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. The working life of this set is 7 years since the date of delivery Upon the expiry of the said period, it might be unsuitable for the use according to their designation. to con- sumer.
