Owner's Manual

4
Hooking up the unit
4
a Connect jacks on the unit and your TV (Digital Device and etc.) using the cables.
b Plug the power cord into the power source.
4 DIGITAL connection
Connect one of the DVD unit’s
DIGITAL OUT jacks to the corre-
sponding in jack on your amplifi-
er. Use an optional digital audio
cable.
Connect each jacks to the
corresponding in jacks on
your amplifier(receiver).
After making this connction,
adjust audio setting by refer-
ring to the page 8.
5 5.1 ch audio connection
For Advanced Sound Quality - You can enjoy the best optimized sound quality according to a selected input sound source.
1 Audio / Video out connection
The unit’s Audio jacks are colour
coded (red for right audio and white for
left audio).
Connect the AUDIO
OUT/VIDEO OUT jack on the unit to
the corresponding input jack on your
TV using a Audio/Video cable.
2 SCART connection
Connect the TO TV jack on
the unit and your TV using the
SCART cable.
For General connection - Check the jack of TV and connect according to one way as follows.
a
c
b
d
For High Definition Resolution
Connect the COMPONENT
VIDEO OUT/PROGRESSIVE
SCAN jacks on the unit to the
corresponding input jacks on
your TV using a Y PB PR
cable.
3
Component Video connection
e
d
KD450 WRUSLL ENG-8639 1/24/11 7:08 PM Page 4