ENGLISH Español OWNER’S MANUAL DRYER Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times. DLE7050* DLG7051* www.lg.com MFL67652513 MFL67652513_en_170829.indd 1 Copyright © 2017 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS TABLE OF CONTENTS 3 PRODUCT FEATURES 4 SAFETY INSTRUCTIONS 5 7 8 IMPORTANT SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS CALIFORNIA SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT 9 PRODUCT OVERVIEW 9 9 Parts Accessories 10 INSTALLATION 10 10 11 11 13 14 15 16 18 20 24 25 35 SMART FUNCTIONS 35 36 Smart ThinQ Application Smart Diagnosis™ Function 37 MAINTENANCE 37 Regular Cleaning 38 Troubleshooting 38 38 39 FAQs: Frequently Asked Questions User Support Videos Before Calling for Se
PRODUCT FEATURES ENGLISH PRODUCT FEATURES 3 Easy-to-Use Control Panel An entire selection of user-friendly functions make operating the dryer easy. Easy-Access Reversible Door The wide-opening door provides easy access for loading and unloading. The door hinge can be reversed to adjust for installation location.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word DANGER, WARNING, or CAUTION.
SAFETY INSTRUCTIONS 5 ENGLISH IMPORTANT SAFETY INSTRUCTIONS Warning To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Installation •• Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt. •• Do not install or store this appliance where it will be exposed to the weather. •• Do not place items exposed to cooking oils in your dryer.
SAFETY INSTRUCTIONS Operation •• Read all instructions before using the appliance. •• Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode. •• Do not reach into the appliance if the drum is moving. •• Do not allow children to play on or in the appliance.
SAFETY INSTRUCTIONS 7 ENGLISH GROUNDING INSTRUCTIONS Warning Improper connection of the equipment-grounding conductor may result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt that the appliance is properly grounded. •• This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
SAFETY INSTRUCTIONS CALIFORNIA SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT •• This act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects, or other reproductive harm and requires businesses to warn customers of potential exposure to such substances.
PRODUCT OVERVIEW ENGLISH PRODUCT OVERVIEW Parts Control panel Reversible door Lint filter Leveling feet 9 Terminal block access panel (electric models) Gas connection location (gas models) Power cord location (gas models) Exhaust duct outlet Accessories Optional Accessories Drying rack (sold separately) No. 3750EL0001C Side vent kit (sold separately) Kit No. 383EEL9001B NOTE •• Visit www.lg.com to purchase accessories.
INSTALLATION INSTALLATION Installation Overview Please read the following installation instructions first after purchasing this product or transporting it to another location. Check and choose the proper location Level the dryer Connect electric dryers Connect the Gas dryer Installation test Vent the dryer Gas dryer Electric dryer Plug in the power cord Test run Product Specifications The appearance and specifications listed in this manual may vary due to constant product improvements.
INSTALLATION 11 ENGLISH Installation Location Requirements Warning Read all installation instructions completely before installing and operating the dryer! It is important that you review this entire manual before installing and using the dryer. Detailed instructions concerning electrical connections, gas connections, and exhaust requirements are provided on the following pages. The installation requires: •• A location that allows for proper exhaust installation.
INSTALLATION Closet Ventilation Requirements Closets with doors must have both an upper and lower vent to prevent heat and moisture buildup in the closet. One upper vent opening with a minimum opening of 48 sq. in. (310 cm2) must be installed no lower than 6 feet above the floor. One lower vent opening with a minimum opening of 24 sq. in. (155 cm2) must be installed no more than one foot above the floor. Install vent grills in the door or cut down the door at the top and bottom to form openings.
INSTALLATION 13 2 Warning To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long-sleeved gloves and safety glasses. Failure to follow this warning may result in serious injury or death. Use an adjustable wrench to turn the leveling feet. Unscrew the legs to raise the dryer or screw in the legs to lower it. Raise or lower with the leveling feet until the dryer is level from side to side and front to back.
INSTALLATION Reversing the Door 4 Warning THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure to follow the instructions below can result in damage to the dryer, property damage or injury to persons. Remove the 4 screws securing the hinges to the door frame. Remove the two plastic cover caps. Reinstall the hinges and cover caps on the opposite sides from which they were removed.
INSTALLATION 15 3 Warning •• Use a heavy metal vent. •• Do not use plastic or thin foil ducts. •• Clean old ducts before installing this dryer. •• To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long-sleeved gloves and safety glasses. •• Failure to follow all of the safety warnings in this manual could result in property damage, injury to persons, or death. Preassemble a 4-inch (10.2 cm) elbow to the next 4-inch (10.
INSTALLATION Venting the Dryer Warning To reduce the risk of fire or explosion, electric shock, property damage, injury to persons or death when using this appliance, follow basic safety precautions, including the following: •• Do not crush or collapse ductwork. Failure to follow these instructions may result in fire or death. •• Do not allow ductwork to rest on or contact sharp objects. Failure to follow these instructions may result in fire or death.
INSTALLATION 17 NOTE Follow the guidelines below to maximize drying performance and reduce lint buildup and condensation in the ductwork. Ductwork and fittings are NOT included and must be purchased separately. •• Use 4-inch (10.2 cm) diameter rigid, semi-rigid or flexible metal ductwork. ENGLISH Routing And Connecting Ductwork •• The exhaust duct run should be as short as possible. •• Use as few elbow joints as possible. •• The male end of each section of exhaust duct must point away from the dryer.
INSTALLATION Connecting Gas Dryers Warning To reduce the risk of fire or explosion, electric shock, property damage, injury to persons, or death when using this appliance, follow basic safety precautions. Gas Supply Requirements •• As shipped from the factory, this dryer is configured for use with natural gas (NG). It can be converted for use with propane (LP) gas. Gas pressure must not exceed 8 inches (20.3 cm) of water column for NG, or 13 inches (33 cm) of water column for LP.
INSTALLATION 19 •• Installation and service must be performed by a qualified installer, service agency, or the gas supplier. Failure to do so may result in fire, explosion, or death. •• Use only a new stainless steel flexible connector and a new AGA-certified connector. Failure to do so may result in fire, explosion, or death. •• A gas shutoff valve must be installed within 6 ft. (1.8 m) of the dryer. Failure to do so may result in fire, explosion, or death.
INSTALLATION Connecting Electric Dryers Electrical Requirements for Electric Models Only Warning To help prevent fire, electric shock, serious injury, or death, the wiring and grounding must conform to the latest edition of the National Electrical Code, ANSI/NFPA 70 and all applicable local regulations. Please contact a qualified electrician to check your home’s wiring and fuses to ensure that your home has adequate electrical power to operate the dryer.
INSTALLATION 21 Connect the power cord to the terminal block. Connect each wire in the power cord to the terminal block screw with the matching colored wire. The terminal block wire colors are indicated in the manual. Failure to follow these instructions may result in a short or overload.
INSTALLATION Four-Wire Direct Wire •• A 4-wire connection is required for all mobile and manufactured home installations, as well as all new construction after January 1, 1996. •• A UL-listed strain relief is required. •• Use UL-listed 4-wire #10 AWG-minimum copper conductor cable. Allow at least 5 ft. (1.5 m) of wire to allow for removal and reinstallation of the dryer. 1 Remove 5 inches (12.7 cm) of the outer covering from the wire. Remove 5 inches (12.7 cm) of insulation from the ground wire.
INSTALLATION 23 Connect the power cord to the terminal block. Connect each wire in the power cord to the terminal block screw with the matching colored wire. The terminal block wire colors are indicated in the manual. Failure to follow these instructions may result in a short or overload.
INSTALLATION Three-Wire Direct Wire Hot (Black) •• A 3-wire connection is NOT permitted on new construction after January 1, 1996. Neutral (White) Ground Screw Hot (Red) •• A UL-listed strain relief is required. •• Use UL-listed 3-wire, #10 AWG-minimum copper conductor cable. Allow at least 5 ft. (1.5 m) length to allow for removal and installation of dryer. 1 Remove 3½-inch (8.9 cm) of the outer covering from the wire. Strip 1 inch (2.5 cm) insulation from each wire.
INSTALLATION 25 4 Once you have completed the installation of the dryer, use this test to make sure the condition of the exhaust system is adequate for proper operation of the dryer. This test should be performed to alert you to any serious problems in the exhaust system of your home. •• This dryer features Flow Sense™, an innovative sensing system that automatically detects blockages and restrictions in dryer ductwork.
INSTALLATION •• Check the duct condition If the Flow SenseTM LED is turned on, check the exhaust system for restrictions and damage. Repair or replace the exhaust system as needed. Restricted or Blocked Airflow Avoid long runs or runs with multiple elbows or bends. NOTE When the dryer is first installed, this test should be performed to alert you to any existing problems with the exhaust duct in your home.
OPERATION 27 ENgLISh OPERATION WARNINg To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the IMPORTANT SAFETY INSTRUCTIONS, before operating this dryer. Using the Dryer Lint Filter 1 Clean the Lint Filter If the lint filter has not already been cleaned, lift out the filter and remove the lint from the last load. This will help ensure the fastest and most efficient drying performance.
OPERATION Check the Lint Filter Before Every Load Group Similar Items Always make sure the lint filter is clean before starting a new load; a clogged lint filter will increase drying time. To clean, pull the lint filter straight up and roll any lint off the filter with your fingers. Do not rinse or wash the filter to remove lint. Push the lint filter firmly back into place. See Regular Cleaning for more information.
OPERATION 29 1 2 3 4 5 7 1 POWER Button Press to turn the dryer ON. Press again to turn the dryer OFF. NOTE Pressing the POWER button during a cycle will cancel that cycle and any load settings will be lost. 2 Cycle Selector Knob Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets are shown in the display. On MANUAL DRY cycles, these settings can be adjusted using the cycle modifier buttons any time before starting the cycle.
OPERATION 8 9 10 11 13 12 8 Custom PGM If you have a special combination of settings that you use frequently, you can save these settings as a Custom Program. 12 Estimated Time Remaining This display shows the estimated time remaining for SENSOR DRY cycles or the actual time remaining for Time Dry or MANUAL DRY cycles.
OPERATION 31 Cycle = default setting = allowable option Fabric Type Normal Work clothes, corduroys, etc. Perm. Press Permanent press, Synthetic items Delicates Lingerie, sheets, blouses Speed Dry For small loads with short drying times Air Dry For items that require heatfree drying such as plastics or rubber MFL67652513_en_170829.indd 31 Dry Level Normal Dry Adjustable Normal Dry Adjustable Normal Dry Adjustable Auto Off Temp.
OPERATION SENSOR DRY cycles MANUAL DRY cycles SENSOR DRY cycles utilize LG’s unique dual sensor system to detect and compare the moisture level in clothes and in the air and adjust the drying time as needed to ensure superior results. The dryer automatically sets the dryness level and temperature at the recommended setting for each cycle. The estimated time remaining will be shown in the display. NOTE Use MANUAL DRY cycles to select a specific amount of drying time and a drying temperature.
OPERATION 33 Cycle Modifier Buttons SENSOR DRY cycles have preset settings that are selected automatically. MANUAL DRY cycles have default settings, but you may also customize the settings using the cycle modifier buttons. Press the button for that option to view and select other settings. Cycle Option Buttons The dryer features several additional cycle options to customize cycles to meet individual needs.
OPERATION Special Functions Some cycle option buttons also activate secondary functions. These special functions are marked with an asterisk (*). Press and hold the option button marked with the special function to activate it. Drum Light The drum is equipped with a blue LED that illuminates when the dryer is turned on. This light automatically turns off when the door is closed and the cycle starts. To turn on the light during a cycle, press the Drum Light button.
SMART FUNCTIONS 35 Smart ThinQ Application The Smart ThinQ application allows you to communicate with the appliance using a smartphone. Installing Smart ThinQ Application Search for the LG Smart ThinQ application from the Google Play Store on a smart phone. Follow instructions to download and install the application.
SMART FUNCTIONS Smart Diagnosis™ Function Should you experience any problems with the appliance, it has the capability of transmitting data via your telephone to the LG Customer Information Center. NFC or Wi-Fi equipped models can also transmit data to a smartphone using the LG Smart ThinQ application. Smart Diagnosis™ through the Customer Information Center ••For appliances with the or logo This gives you the capability of speaking directly to our trained specialists.
MAINTENANCE 37 Regular Cleaning Warning To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following: •• Unplug the dryer before cleaning to avoid the risk of electric shock. Failure to follow this warning may cause serious injury, fire, electric shock, or death. Maintaining Ductwork Vent ductwork should be checked for lint buildup once per month and cleaned at least once per year.
Troubleshooting Troubleshooting FAQs: Frequently Asked Questions Q: When I press a button, why does my dryer beep and then nothing happens? A: The Control Lock feature is turned on. To turn off Control Lock, turn the dryer on, then press and hold the button that has *Control Lock on or under it for 3 seconds. Q: Why does my dryer take so long to dry clothes? A: Proper airflow is critical to the efficient operation of clothes dryers.
Troubleshooting 39 This dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the dryer does not function properly or does not function at all, check the following before you call for service. ENGLISH Before Calling for Service Operation Problem TM Possible Cause Solutions The Flow Sense indicator remains active after clearing the restriction in the venting.
Troubleshooting Problem Possible Cause Solutions Clothes take too long to dry Exhaust ducts are blocked, dirty, or duct run is too long. Confirm that the exhaust duct is properly configured and free of debris, lint, and obstructions. Make sure that outside wall dampers can open properly and are not blocked, jammed, or damaged. Load is not properly sorted. Separate heavy items from lightweight items. Larger and heavier items take longer to dry.
Troubleshooting 41 Possible Cause Solutions Clothes take too long to dry Energy Saver option selected (on some models) If using the Cotton/Normal cycle, deselect the Energy Saver option. This option reduces energy use by adding an air dry section to the beginning of the cycle. Drying time is not consistent Heat settings, load size, or dampness of clothing is not consistent.
Troubleshooting Performance Problem Greasy or dirty spots on clothes Possible Cause Solutions Fabric softener used incorrectly. Confirm and follow the instructions provided with your fabric softener. Clean and dirty clothes are being dried together. Use your dryer to dry only clean items. Soil from dirty clothes can transfer to the clean clothes in the same or later loads. Clothes were not properly cleaned or rinsed before being placed in the dryer.
Troubleshooting 43 Lint on clothes Excess static in clothes after drying Clothes have damp spots after a SENSOR DRY cycle. Possible Cause Solutions Excess static in clothes. Use a fabric softener to reduce static electricity. Be sure to follow the manufacturer’s instructions. Overdrying a load of laundry can cause a buildup of static electricity. Adjust settings and use a shorter drying time, or use SENSOR DRY cycles. Dryer is overloaded. Divide extra large loads into smaller loads for drying.
Troubleshooting Error Codes Problem Possible Cause Solutions Error code: tE1 through tE7 Temperature sensor failure. Turn off the dryer and call for service. Display shows error code: PS (electric dryers only) Power cord is connected incorrectly. Check the connection of the power cord to the terminal block. *Flow SenseTM indicator shows four bars during the drying cycle or the display shows "d80" after drying Exhaust system is too long or has too many turns/restrictions.
WARRANTY 45 Should your LG Dryer (“Product”) fail due to a defect in materials or workmanship under normal home use, during the warranty period set forth below, LG will at its option repair or replace the product. This limited warranty is valid only to the original retail purchaser of the product and applies only when purchased and used within the United States including U.S. Territories. Proof of original retail purchase is required to obtain warranty service under this limited warranty.
WARRANTY •• Costs associated with removal of your Product from your home for repairs. •• The removal and reinstallation of the Product if it is installed in an inaccessible location or is not installed in accordance with published installation instructions, including LG’s owner’s and installation manuals. •• Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair includes use of parts not approved or specified by LG. Filter is clogged.
Memo MFL67652513_en_170829.
Memo MFL67652513_en_170829.
Memo MFL67652513_en_170829.
Memo MFL67652513_en_170829.
Español MANUAL DEL PROPIETARIO SECADORA Lea atentamente este manual del propietario antes de poner el aparato en funcionamiento y téngalo a mano en todo momento para su referencia. DLE7050* DLG7051* www.lg.com Copyright © 2017 LG Electronics Inc. Todos los Derechos Reservados. MFL67652513_sp_170829.
2 TABLA DE CONTENIDOS TABLA DE CONTENIDOS 3 CARACTERÍSTICAS DEL PRODUCTO 4 INSTRUCCIONES DE SEGURIDAD 5 7 8 INSTRUCCIONES IMPORTANTES DE SEGURIDAD INSTRUCCIONES DE CONEXIÓN A TIERRA LEY SOBRE AGUA POTABLE Y CALIDAD TOXICOLÓGICA DE CALIFORNIA (CALIFORNIA SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT) 9 DESCRIPCIÓN GENERAL DEL PRODUCTO 9 9 35 FUNCIONES INTELIGENTES 35 36 Aplicación Smart ThinQ Función Smart Diagnosis ™ 37 MANTENIMIENTO 37 Limpieza regular 38 Solución de problemas 38 38 39 Pregunta
CARACTERÍSTICAS DEL PRODUCTO 3 CARACTERÍSTICAS DEL PRODUCTO Panel de control fácil de usar Una completa selección de funciones de fácil manejo simplifica la operación de la secadora. La amplia puerta permite acceder fácilmente para la carga y descarga. La bisagra de la puerta puede invertirse para ajustarse a la ubicación de la instalación.
4 INSTRUCCIONES DE SEGURIDAD INSTRUCCIONES DE SEGURIDAD LEA TODAS LAS INSTRUCCIONES ANTES DE USAR Su seguridad y la seguridad de los demás son muy importantes. Hemos proporcionado muchos mensajes de seguridad importantes en este manual y en su aparato. Siempre lea y obedezca todos los mensajes de seguridad. Este es el símbolo de alerta de seguridad. Este símbolo lo alerta sobre peligros potenciales que pueden ocasionar la muerte o una lesión a usted y a los demás.
INSTRUCCIONES DE SEGURIDAD 5 INSTRUCCIONES IMPORTANTES DE SEGURIDAD Advertencia Para reducir el riesgo de incendio, descargas eléctricas o lesiones personales al usar su equipo, siga las precauciones básicas, incluso lo siguiente: •• Mantenga el área alrededor de la abertura de escape y las áreas adyacentes libres de acumulación de pelusa, polvo y tierra. •• No instale ni almacene esta secadora en lugares donde pueda estar expuesta a la intemperie.
6 INSTRUCCIONES DE SEGURIDAD Funcionamiento Vapor (solo para modelos con función de vapor): •• Lea todas las instrucciones antes de usar el aparato. •• No abra la secadora durante el ciclo de vapor. Si no se siguen estas instrucciones, se podría producir una quemadura. •• No seque prendas que hayan sido limpiadas, lavadas, remojadas o salpicadas previamente con gasolina, solventes de limpieza en seco u otras sustancias inflamables o explosivas, ya que emanan vapores que podrían inflamarse o explotar.
INSTRUCCIONES DE SEGURIDAD 7 INSTRUCCIONES DE CONEXIÓN A TIERRA Advertencia •• Este aparato debe estar conectado a tierra. En caso de mal funcionamiento o avería, la conexión a tierra reducirá el riesgo de descarga eléctrica, ya que proporcionará una trayectoria de menor resistencia para la corriente eléctrica. •• Este aparato debe estar equipado con un cable que tenga un conductor para la conexión a tierra del equipo y un enchufe con conexión a tierra.
8 INSTRUCCIONES DE SEGURIDAD LEY SOBRE AGUA POTABLE Y CALIDAD TOXICOLÓGICA DE CALIFORNIA (CALIFORNIA SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT) •• Esta ley requiere que el gobernador de California publique una lista de sustancias que el estado considera que causan cáncer, defectos congénitos u otras lesiones reproductivas y obliga a las empresas a alertar a los clientes sobre la posible exposición a tales sustancias.
DESCRIPCIÓN GENERAL DEL PRODUCTO 9 DESCRIPCIÓN GENERAL DEL PRODUCTO Partes Puerta reversible Filtro de pelusa Patas niveladoras Ubicación del cable eléctrico (Modelos a gas) Panel de acceso del bloque terminal (Modelos eléctricos) Ubicación de la toma de gas (Modelos a gas) Español Panel de control Salida del conducto de escape Accesorios Accesorios opcionales Rejilla de secado (se vende por separado) kit: 3750EL0001C Kit de ventilación lateral (se vende por separado) N.
10 INSTALACIÓN INSTALACIÓN Descripción general de la instalación Lea las siguientes instrucciones de instalación en primer lugar, después de comprar este producto o transportarlo a otra ubicación.
INSTALACIÓN 11 Requisitos del lugar de instalación Advertencia La instalación requiere: •• Un lugar que permita la instalación correcta del sistema de escape. La secadora de gas debe tener un escape al exterior. Consulte la sección Ventilación de la secadora. Español ¡Lea todas las instrucciones de instalación antes de instalar y operar su secadora! Es importante que revise este manual por completo antes de instalar y usar su secadora.
12 INSTALACIÓN Requisitos de ventilación para armarios Los armarios con puertas deben tener ventilación tanto en la parte superior como en la inferior para evitar la acumulación de calor y humedad dentro del armario. Se debe instalar una abertura de ventilación superior con una apertura mínima de 48 pulgadas cuadradas (310 cm2) a no menos de 6 pies del suelo. Se debe instalar una abertura de ventilación inferior con una apertura mínima de 24 pulgadas cuadradas (155 cm2) a no más de un pie del suelo.
INSTALACIÓN 13 Nivelación de la secadora Advertencia Utilice una llave de tuercas ajustable para girar las patas niveladoras. Desenrosque las patas para levantar la secadora o enrósquelas para bajarla. Suba o baje la secadora con las patas niveladoras hasta que se encuentre nivelada de lado a lado y de adelante hacia atrás. Asegúrese de que las cuatro patas niveladoras se encuentran haciendo contacto firme con el piso.
14 INSTALACIÓN Inversion de la puerta 4 advertencia Retire los 4 tornillos fijando las bisagras a la estructura de la puerta. Retire los dos rellenadores de plástico. Vuelva a instalar las bisagras y los rellenadores en los lados opuestos a su posición inicial. LA PUERTA DE LA SECADORA ES MUY GRANDE Y PESADA. El no seguimiento de las instrucciones siguientes puede dañar la secadora, ocasionar daños materiales o físicos.
INSTALACIÓN 15 Instalación del kit de ventilación lateral 3 Advertencia •• No utilice conductos de plástico ni de lámina de metal. •• Limpie los conductos antiguos antes de instalar esta secadora. •• Para reducir el riesgo de lesiones personales, cumpla con todos los procedimientos de seguridad recomendados por la industria, incluso el uso de guantes con mangas largas y gafas de seguridad.
16 INSTALACIÓN Ventilación de la secadora Advertencia Para reducir el riesgo de incendio o explosión, descargas eléctricas, daños a la propiedad, lesiones personales o la muerte al usar este aparato, siga las precauciones básicas de seguridad, incluso lo siguiente: •• No aplaste ni haga colapsar los conductos. El incumplimiento de estas instrucciones podrá producir un incendio o la muerte. •• No permita que los conductos se apoyen sobre objetos puntiagudos ni entren en contacto con ellos.
INSTALACIÓN 17 Recorrido y conexión de los conductos NOTA Español Siga las pautas a continuación para maximizar el rendimiento de secado, para reducir la acumulación de pelusa y la condensación en los conductos. Los conductos y las conexiones NO están incluidos y deben adquirirse por separado. •• Use conductos metálicos rígidos, semirrígidos o flexibles de 4 pulgadas (10,2 cm) de diámetro. •• El tendido del conducto de escape debe ser lo más corto posible.
18 INSTALACIÓN Conexión de secadoras de gas Advertencia Para reducir el riesgo de incendio o explosión, descargas eléctricas, daños a la propiedad, lesiones personales o la muerte al usar este aparato, siga las precauciones básicas de seguridad. •• Utilice únicamente una línea de suministro de gas nueva certificada por AGA o CSA con conectores flexibles de acero inoxidable. Si esto no se cumple, se podrá producir una explosión, un incendio o la muerte. •• Ajuste bien todas las conexiones de gas.
INSTALACIÓN 19 Conexión del suministro de gas •• La instalación y el mantenimiento deben ser realizados por un instalador, una agencia de mantenimiento o una compañía de gas calificados. Si esto no se cumple, se podrá producir una explosión, un incendio o la muerte. •• Se debe instalar una válvula de corte de gas a una distancia máxima de 6 pies (1,8 m) de la secadora. Si esto no se cumple, se podrá producir una explosión, un incendio o la muerte.
20 INSTALACIÓN Conexión de secadoras eléctricas Requisitos eléctricos para modelos eléctricos únicamente Advertencia Para ayudar a evitar incendios, descargas eléctricas, lesiones graves o la muerte, el cableado y la descarga a tierra deben cumplir con la última edición del Código Eléctrico Nacional, ANSI/NFPA 70 y todas las regulaciones locales correspondientes.
INSTALACIÓN 21 Advertencia La conexión a tierra a través del conductor neutro está prohibido para: (1) nuevas instalaciones de circuito derivado, (2) casas móviles, (3) vehículos recreativos y (4) áreas donde los códigos locales prohíban una conexión a tierra a través del conductor neutro. Conecte los dos conductores vivos del cable de alimentación a los tornillos exteriores del bloque de bornes. 6 Conecte el alambre neutro de color blanco al tornillo central del bloque de bornes.
22 INSTALACIÓN Conexión directa de cuatro hilos •• Se requiere una conexión de 4 hilos en todas las instalaciones de casas móviles y prefabricadas, así como en todas las construcciones nuevas posteriores al 1 de enero de 1996. •• Se requiere un aliviador de tensión homologado por UL. •• Use un cable conductor de cobre de 4 hilos homologado por UL N.° 10 AWG como mínimo. Deje un mínimo de 5 pies (1,5 m) de longitud de cable para poder retirar y reinstalar la secadora.
INSTALACIÓN 23 Advertencia La conexión a tierra a través del conductor neutro está prohibido para: (1) nuevas instalaciones de circuito derivado, (2) casas móviles, (3) vehículos recreativos y (4) áreas donde los códigos locales prohíban una conexión a tierra a través del conductor neutro. Cable de alimentación de tres hilos •• NO se permite una conexión de 3 hilos en construcciones nuevas posteriores al 1 de enero de 1996. •• Se requiere un aliviador de tensión homologado por UL.
24 INSTALACIÓN Conexión directa de tres hilos 9 Reinstale la cubierta de acceso al bloque de bornes. •• NO se permite una conexión de 3 hilos en construcciones nuevas posteriores al 1 de enero de 1996. •• Se requiere un aliviador de tensión homologado por UL. •• Use un cable conductor de cobre de 3 hilos homologado por UL N.° 10 AWG como mínimo. Deje un mínimo de 5 pies (1,5 m) de longitud de cable para poder retirar e instalar la secadora.
INSTALACIÓN 25 Prueba de instalación (Revisión de conductos) 4 •• Su secadora cuenta con Flow Sense™, un sistema innovador que detecta automáticamente los bloqueos y las restricciones en los conductos de la secadora. Mantener los conductos sin acumulación de pelusa y sin restricciones le permitirá secar la ropa más rápido y reducir el uso de energía. SIN BARRAS: ADECUADO Para activar la prueba de instalación: 1 2 3 Retire la rejilla de secado y la documentación, y cierre la puerta.
26 INSTALACIÓN •• Verifique las condiciones del conducto Si el LED de Flow SenseTM está encendido, revise el sistema de escape para verificar que no haya restricciones ni daños. Repare o reemplace el sistema de escape según sea necesario. Flujo de aire restringido o bloqueado Evite tendidos largos o con muchos codos o curvas.
FUNCIONAMIENTO 27 FUNCIONAMIENTO ADVERTENCIA Para reducir el riesgo de incendio, descargas eléctricas o lesiones personales, lea este manual por completo, incluso las INSTRUCCIONES IMPORTANTES DE SEGURIDAD, antes de operar esta secadora. ESPAÑOL Cómo usar la secadora Lint Filter 1 Limpie el filtro de pelusa Si el filtro de pelusa no se ha limpiado aún, extráigalo y elimine las pelusas de la última carga. Esto le ayudará a asegurar un rendimiento de secado más rápido y eficiente.
28 FUNCIONAMIENTO Revise el filtro de pelusa antes de cada carga Agrupe prendas similares Asegúrese siempre de que el filtro de pelusa esté limpio antes de iniciar una carga nueva; un filtro de pelusa bloqueado incrementará los tiempos de secado. Para limpiarlo, tire del filtro de pelusa hacia arriba y, con los dedos, haga rodar las pelusas para retirarlas del filtro. No enjuague ni lave el filtro para eliminar las pelusas. Empuje el filtro de pelusa firmemente para colocarlo en su lugar.
FUNCIONAMIENTO 29 Panel de control 1 2 3 4 5 6 Español 7 1 Botón POWER (Encendido) Presione para ENCENDER la secadora. Presione nuevamente para APAGAR la secadora. 4 5 Pantalla de visualización de tiempo y estado La pantalla muestra los ajustes, el tiempo restante estimado, las opciones y los mensajes de estado de su secadora. NOTA Si presiona el botón POWER durante un ciclo, se cancelará dicho ciclo y los ajustes de la carga se perderán.
30 FUNCIONAMIENTO 8 9 10 11 13 8 Custom PGM (Programa personalizado) Si usted usa una combinación especial de ajustes con frecuencia, puede guardar estos ajustes como un programa personalizado. 12 12 Tiempo restante estimado Esta pantalla muestra el tiempo restante estimado de los ciclos SENSOR DRY o el tiempo restante efectivo de los ciclos Time Dry o MANUAL DRY.
FUNCIONAMIENTO 31 Guía de ciclos Ciclo = configuración por defecto = opción permisible de Tipo de tela Nivel de secado Delicado (Delicates) Lencería, sábanas, blusas Normal seco Regulable Secado Para poca carga con tiempos de secado Rápido cortos. (Speed Dry) Auto Secado Por Para prendas que no precisan calor, por Aire llevar plástico o goma (Air Dry) Apagado MFL67652513_sp_170829.indd 31 Media Baja Español Normal seco Normal Ropa de trabajo, pana, etc.
32 FUNCIONAMIENTO Ciclos de secado con sensor (SENSOR DRY) Ciclos de secado manual (MANUAL DRY) Los ciclos de secado con sensor utilizan el sistema exclusivo de sensor doble de LG para detectar y comparar el nivel de humedad en las prendas y en el aire, y programar el tiempo de secado del modo necesario para asegurar resultados superiores. La secadora ajusta automáticamente el nivel de sequedad y temperatura del ajuste recomendado para cada ciclo. El tiempo restante estimado se mostrará en la pantalla.
FUNCIONAMIENTO 33 Ajustes y opciones de ciclo Botones de modificación de ciclo Su secadora cuenta con varias opciones de ciclo adicionales para personalizar los ciclos y satisfacer sus necesidades individuales. Algunos botones de opciones también incorporan una función especial (ver la siguiente página para obtener más detalles) que puede activarse al mantener presionado el botón de dicha opción durante 3 segundos.
34 FUNCIONAMIENTO Funciones especiales Algunos botones de opciones de ciclo también activan funciones secundarias. Estas funciones especiales están indicadas con un asterisco (*). Mantenga presionado el botón de opción que indica la función especial para activarla. Drum Light (Iluminación del tambor) El tambor está equipado con una luz LED azul que se ilumina cuando la secador es encendida. La luz de apaga automáticamente cuando la puerta se cierra y el ciclo inicia.
FUNCIONES INTELIGENTES 35 FUNCIONES INTELIGENTES NOTA ••Presione en la aplicación LG Smart ThinQ para obtener una guía más detallada de cómo usar la función Tag On. Aplicación Smart ThinQ Cómo instalar la aplicación Smart ThinQ Busque la aplicación LG Smart ThinQ en Google Play Store desde un teléfono inteligente. Siga las instrucciones para descargar e instalar la aplicación.
36 FUNCIONES INTELIGENTES Función Smart Diagnosis ™ En caso de experimentar algún problema con el aparato, el mismo tiene la capacidad de transmitir datos a través de su teléfono al Centro de información del cliente de LG. Los modelos equipados con NFC o Wi-Fi pueden también transmitir datos a un teléfono inteligente usando la aplicación LG Smart ThinQ.
MANTENIMIENTO 37 MANTENIMIENTO Limpieza regular •• Desenchufe la secadora antes de la limpieza para evitar el riesgo de descargas eléctricas. Si no se cumple con esta advertencia, se podrán producir lesiones graves, incendios, descargas eléctricas o la muerte. Se deben revisar los conductos de ventilación para verificar que no tengan acumulación de pelusa una vez por mes y se deben limpiar, al menos, una vez por año.
38 Solución de problemas Solución de problemas Preguntas frecuentes P: Cuando presiono un botón, ¿por qué la secadora emite un pitido y luego no sucede nada? R: La función Control Lock está activada. Para desactivar Control Lock, encienda la secadora y, luego, mantenga presionado el botón con la indicación *Control Lock en él o debajo de él durante 3 segundos.
Solución de problemas 39 Antes de llamar al servicio técnico Su secadora está equipada con un sistema de monitoreo de errores automático para la detección y el diagnóstico de problemas en una etapa temprana. Si su secadora no funciona correctamente o no funciona en absoluto, consulte la siguiente información antes de llamar al servicio técnico. Español Funcionamiento Problema Causa posible El indicador Flow SenseTM permanece activo después de haber limpiado la obstrucción en el sistema de ventilación.
40 Solución de problemas Problema La ropa tarda demasiado tiempo en secarse. La ropa tarda demasiado tiempo en secarse. Causa posible Soluciones Los conductos de escape están bloqueados, sucios o el tendido de los conductos es demasiado extenso. Verifique que los conductos de escape se encuentren configurados correctamente y no tengan desechos, pelusa ni obstrucciones. Asegúrese de que los reguladores de tiro de la pared exterior se abran adecuadamente y no estén bloqueados, atascados ni dañados.
Solución de problemas 41 Problema Soluciones La ropa tarda demasiado tiempo en secarse. La opción de ahorro de energia (Energy Saver) está seleccionada (sur certains modèles) Si utiliza el ciclo Algodon/Normal, desactive la opcion de ahorro de energia. Esta opcion permite reducir el consumo de energia, ya que incorpora una seccion de secado poraire al comienzo del ciclo. El tiempo de secado no es constante. Los ajustes de calor, el tamaño de la carga o la humedad de la ropa no son constantes.
42 Solución de problemas Rendimiento Problema Causa posible Soluciones No se usó correctamente el suavizante de ropa. Confirme y siga las instrucciones provistas por el fabricante del suavizante. Se están secando juntas ropa limpia y sucia. Use la secadora para secar prendas limpias solamente. La suciedad de la ropa sucia puede transferirse a la ropa limpia en la misma carga o en cargas posteriores. La ropa no se lavó ni se enjuagó correctamente antes de colocarse en la secadora.
Solución de problemas 43 Problema Exceso de estática en la ropa después del secado. Soluciones No se usó suavizante de ropa o no se lo usó adecuadamente. Use suavizante de ropa o la opción STATIC SHIELD, si su secadora la incluye, para reducir la electricidad estática. Asegúrese de seguir las instrucciones del fabricante. La ropa se secó durante demasiado tiempo (secado excesivo). El exceso de secado de la ropa puede producir una acumulación de estática.
44 Solución de problemas Códigos de error Problema Causa posible Soluciones Código de error: tE1 a tE7. Falla del sensor de temperatura. Apague la secadora y llame al servicio técnico. La pantalla muestra el código de error: PS (solo para secadoras eléctricas). El cable de alimentación no está bien conectado. Revise la conexión del cable de alimentación al bloque de bornes.
GARANTÍA (EE. UU.) 45 GARANTÍA (EE. UU.) Período de garantía Alcance de la garantía CÓMO SE MANEJA EL SERVICIO TÉCNICO Un (1) año a partir de la fecha de compra minorista original Piezas y mano de obra LG suministrará las piezas y la mano de obra para reparar o reemplazar las piezas defectuosas. Diez (10) años a partir de la fecha de compra minorista original Tambor de la secadora Solo las piezas.
46 GARANTÍA (EE. UU.) •• El retiro y la reinstalación del producto si está instalado en un lugar inaccesible o no está instalado de acuerdo con las instrucciones de instalación publicadas, lo que incluye los manuales de instalación y del propietario de LG. •• Daños resultantes de mal uso, abuso, instalación, reparación o mantenimiento incorrectos. Una reparación incorrecta incluye el uso de piezas no aprobadas o especificadas por LG. El filtro está tapado.
Memo MFL67652513_sp_170829.
Memo MFL67652513_sp_170829.
Memo MFL67652513_sp_170829.
LG Customer Information Center This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR . MFL67652513_sp_170829.indd 50 1-800-243-0000 1-888-542-2623 USA CANADA Register your product Online! www.lg.