Scan to see the online manual. OWNER'S MANUAL DRYER Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times. ENGLISH DL*X370** MFL70442673 Rev.00_022624 www.lg.com Copyright © 2024 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS 3 IMPORTANT SAFETY INSTRUCTIONS 3 4 READ ALL INSTRUCTIONS BEFORE USE WARNING STATEMENTS 8 PRODUCT OVERVIEW 8 Product Features 11 INSTALLATION 11 12 16 16 17 18 19 20 22 26 27 Before Installing Choosing the Proper Location Leveling the Appliance Reversing the Door Installing the Vent Kit Stacking the Appliance Venting the Dryer Connecting Gas Dryers Connecting Electric Dryers Connecting the Water Inlet Hose Final Installation Check 31 OPERATION 31 32 34 36 40 41 Before Use Loa
IMPORTANT SAFETY INSTRUCTIONS 3 IMPORTANT SAFETY INSTRUCTIONS Safety for a Dryer WARNING Fire Hazard Failure to follow safety warnings exactly could result in serious injury, death or property damage. • • Do not install a booster fan in the exhaust duct. Install all clothes dryers in accordance with the installation instructions of the manufacturer of the dryer. WARNING: FIRE OR EXPLOSION HAZARD Failure to follow safety warnings exactly could result in serious injury, death or property damage.
IMPORTANT SAFETY INSTRUCTIONS WARNING Risk of Fire Install the clothes dryer according to the manufacturer’s instructions and local codes. • • • Clothes dryer installation must be performed by a qualified installer. Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers.
IMPORTANT SAFETY INSTRUCTIONS 5 • The appliance must be installed and electrically grounded by qualified service personnel in accordance with local codes. • Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance. • Keep packing materials out of the reach of children. Packaging material can be dangerous for children. There is a risk of suffocation. • Moving or installation of the appliance requires two or more people.
IMPORTANT SAFETY INSTRUCTIONS • If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug it immediately, and contact an LG Electronics customer information center. • Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet. • Do not use an extension cord or adapter with this appliance. • Do not grasp the power cord or touch the appliance controls with wet hands.
IMPORTANT SAFETY INSTRUCTIONS 7 • Do not put living animals such as pets inside the appliance. • Do not put any part of your body, such as your hands or feet, or metal objects under the appliance. • Do not let your hand get pinched when opening or closing the dryer door. Maintenance • Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified service personnel unless specifically recommended in this Owner’s Manual.
PRODUCT OVERVIEW PRODUCT OVERVIEW Product Features The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes.
PRODUCT OVERVIEW 9 Product Specifications Model DL*X370** Please refer to the rating label for detailed information. Min. / Max. Water Pressure 20 - 120 psi (138 - 827 kPa) Dimensions (Width X Depth X Height) 27'' X 30 1/8'' X 39'' (68.6 cm X 76.5 cm X 99 cm) Maximum Depth with Door Open 51 3/8'' (130.5 cm) Net Weight Gas : 123.02 lb (55.8 kg) - 126.77 lb (57.5 kg) Electric : 120.15 lb (54.5 kg) 123.46 lb (56 kg) Capacity Steam Cycle 7.4 cu.ft. (8 lb / 3.6 kg) Normal Cycle 7.4 cu.ft. (22.
PRODUCT OVERVIEW NOTE • For your safety and extended product life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of unauthorized components or parts.
INSTALLATION 11 INSTALLATION Installation Overview Please read the following installation instructions first after purchasing this dryer or transporting it to another location. a Choose the proper location. b Level the appliance. c Vent the appliance. d Connect the inlet hose (for steam models) e Connect the Gas / Electric dryer. • Purchase a UL-listed, 3-wire or 4-wire power cord kit with UL-listed strain relief (electric dryer only) f Plug in the power cord. g Installation test and test run.
INSTALLATION Choosing the Proper Location WARNING • Read all installation instructions completely before installing and operating the appliance. It is important that you review this entire manual before installing and using the appliance. Detailed instructions concerning electrical connections and additional requirements are provided on the following pages. Exhaust • The location must allow for proper exhaust installation. A gas dryer must be exhausted to the outdoors.
INSTALLATION 13 Dimensions and Clearances The following clearances are recommended for the appliance. • Additional clearances should be considered for ease of installation and servicing. Installation Spacing for Recessed Area or Closet Installation - Description Dimension/Clearance A Upper Ventilation Opening 2 48 sq. in. (310 cm2) B Lower Ventilation Opening 2 24 sq. in.
INSTALLATION Closet Ventilation Requirements Closets with doors must have both an upper and lower vent to prevent heat and moisture buildup in the closet. One upper vent opening with a minimum opening of 48 sq. in. (310 cm2) must be installed no lower than 6 feet above the floor. One lower vent opening with a minimum opening of 24 sq. in. (155 cm2) must be installed no more than one foot above the floor. Install vent grilles in the door or cut down the door at the top and bottom to form openings.
INSTALLATION 15 Installation Spacing for Cabinet ENGLISH For cabinet installation with a door, minimum ventilation openings in the top of the cabinet are required.
INSTALLATION Leveling the Appliance WARNING • Use long-sleeved gloves and safety glasses. • The appliance is heavy. Two or more people are required when installing the appliance. NOTE • If you are installing the appliance on the optional pedestal, you must use the leveling feet on the pedestal to level the appliance. The appliance leveling feet should be fully retracted.
INSTALLATION 17 ENGLISH 2 While supporting the door, remove the 2 screws on the door hinge. Remove the door. Installing the Vent Kit WARNING • Use long-sleeved gloves and safety glasses. • Use a heavy metal vent. • Do not use plastic or thin foil ducts. 3 • Clean old ducts before installing the appliance. Turn the door upside down and line up the holes in the hinge with the holes on the opposite side of the cabinet. Reinstall the door with the screws removed in step 2.
INSTALLATION 3 d c 3 Preassemble a 4" (10.2 cm) elbow e to the next 4" (10.2 cm) duct section, and secure all joints with duct tape. Be sure that the male end of the elbow faces AWAY from the dryer. Insert the elbow/duct assembly through the side opening and press it onto the adapter duct. Secure it in place with duct tape. Be sure that the male end of the duct protrudes 1.5" (3.8 cm) to connect the remaining ductwork. Attach the cover plate f to the back of the dryer with the included screw.
INSTALLATION 19 1 Make sure the surface of the washer is clean and dry. Remove paper backing from the tape on one of the stacking kit side brackets. Venting the Dryer WARNING • To reduce the risk of fire, combustion, or accumulation of combustible gases, DO NOT exhaust dryer air into an enclosed and unventilated area, such as an attic, wall, ceiling, crawl space, chimney, gas vent, or concealed space of a building. 2 Fit the side bracket to the side of the washer top as shown.
INSTALLATION Ductwork Maximum length of 4-inch diameter rigid metal duct Wall Cap Type No. of 90° Elbows Recommended 0 65 ft. (19.8 m) 1 55 ft. (16.8 m) 2 47 ft. (14.3 m) 3 36 ft. (11.0 m) 4 28 ft. (8.5 m) 0 55 ft. (16.8 m) 1 47 ft. (14.3 m) 2 41 ft. (12.5 m) 3 30 ft. (9.1 m) 4 22 ft. (6.7 m) a a a: 4 ‘’ (10.2 cm) Use for only short run installations b b: 2.5 ‘’ (6.35 cm) • Incorrect or inadequate exhaust systems are not covered by the dryer warranty.
INSTALLATION 21 • This dryer must be plugged into a 120-VAC, 60Hz. grounded outlet protected by a 15-ampere fuse or circuit breaker. Gas Supply Requirements WARNING • DO NOT attempt any disassembly of the dryer; disassembly requires the attention and tools of an authorized and qualified service technician or company. • DO NOT use an open flame to inspect for gas leaks. Use a noncorrosive leak detection fluid. • Gas pressure must not exceed 10.5-inch (26.7 cm) water column for NG, or 13-inch (33.
INSTALLATION 5 Turn on your laundry room’s gas supply. 6 Check all pipe connections (both internal and external) for gas leaks with a noncorrosive leak-detection fluid. 7 Proceed to Venting the Dryer. • This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance.
INSTALLATION 23 Four-Wire Power Cord Tighten all screws securely. 9 Reinstall the terminal block access cover. b 2 b e • Use a 30-amp, 240-volt, 4-wire, UL-listed power cord with #10 AWG-minimum copper conductor and closed loop or forked terminals with upturned ends. 1 c a d Remove the terminal block access cover on the upper back of the appliance. a White Wire moved from Ground Screw b Hot Leads of Power Cord (Black and Red) Install UL-listed strain relief into the power cord through-hole.
INSTALLATION 2 Remove the terminal block access cover on the upper back of the appliance. b c b e 3 a Install UL-listed strain relief into the power cord through-hole. d 4 Thread the 4-wire #10 AWG minimum copper power cable prepared in step 1 through the strain relief.
INSTALLATION 25 insulation from each wire. Bend the ends of the three wires into a hook shape. c UL-Listed 3-Wire Power Cord 1’’ (2.5 cm) Attach the two hot leads (black and red) of the power cord to the outer terminal block screws. 5 Attach the neutral (white) wire to the center terminal block screw. 6 Connect the external ground (if required by local codes) to the green ground screw. 7 Tighten all screws securely. 8 Reinstall the terminal block access cover.
INSTALLATION temperature for several hours before use and check for leaks prior to operation. • Do not use flood-preventing hoses with auto shut off devices. The devices can be tripped during fill and prevent the appliance from filling properly.
INSTALLATION 27 Connect the short hose c to the Yconnector d using one of the rubber seals. 3) Connect the other end of the short hose c to the cold water faucet. 4) Connect the long dryer hose b to one side of the Y-connector d. Connect the washer hose to the washer and the other side of the Y-connector d. ENGLISH 2) 5 NOTE • Before connecting the water line to the dryer, flush several gallons of water into a drain or bucket.
INSTALLATION Electric Models Close the dryer door and press the Power button to turn the dryer on. Press the Time Dry and Start/Pause buttons to start the test. The exhaust air should be warm after the dryer has been operating for 3 minutes. • Do not load anything in the drum for this test, as it may affect the accuracy of the results. Checking Airflow Effective dryer operation requires proper airflow. The adequacy of the airflow can be measured by evaluating the static pressure.
INSTALLATION 29 the system checked immediately, as performance will be poor. Error Code 5 Electric dryer power cord is not connected correctly, or house power supply is incorrect. • Reset circuit breaker or replace fuse. Do not increase the fuse capacity. End of cycle. • At the end of the test cycle, ENd will display. The test cycle will end and the appliance will shut off automatically after a short delay. House fuse is blown, circuit breaker has tripped, or power outage has occurred.
INSTALLATION Make sure the ductwork is not crushed or restricted.
OPERATION 31 OPERATION WARNING • To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Operation Overview 1 Clean the Lint Filter • If the lint filter has not already been cleaned, lift out the filter and remove the lint from the last load. This will help ensure the fastest and most efficient drying performance. Make sure to reinstall the filter, pressing down until it clicks firmly into place.
OPERATION fingers. Push the lint filter firmly back into place. See Regular Cleaning for more information. Woven and Loopknit Materials • Some woven and loopknit materials may shrink, depending on quality. Permanent Press and Synthetics • Do not overload your dryer. Take out permanent press items as soon as the dryer stops to reduce wrinkles. Baby Clothes and Nightgowns • Always check the manufacturer’s instructions. Always ensure that the lint filter is properly installed before running the dryer.
OPERATION 33 Tumble Dry Label Directions Do not dry (used with do not wash) Heat Setting Label Directions High Medium Low No Heat / Air ENGLISH Do not tumble dry
OPERATION Control Panel Control Panel Features a Power Button • Press the button to turn the appliance on. Press again to turn the appliance off. NOTE • Pressing the Power button during a cycle will cancel that cycle, and any load settings will be lost. b Cycle Selector Knob • Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display.
OPERATION 35 Time and Status Display ENGLISH a Flow Sense Indicator • The Flow Sense™ duct blockage sensing system detects and alerts you to blockages in the ductwork that reduce exhaust flow from the dryer. Maintaining a clean exhaust system improves operating efficiency and helps minimize service calls, saving you money. b Clean Filter Reminder • The Clean Filter indicator lights up at the beginning of the cycle to remind you to check the lint filter.
OPERATION Dry Cycles Turn the knob or press the button to select the desired cycle. When you select a dry cycle the light for the corresponding dry cycle will turn on. Sensor Dry Cycles Sensor dry cycles utilize LG's unique dual sensor system to detect and compare the moisture level in clothes and in the air and adjust the drying time as needed to ensure superior results. The appliance automatically sets the dryness level and temperature at the recommended setting for each cycle.
OPERATION 37 Cycle Temperature Perm. Press Default: Medium Delicates Description Use this cycle for drying dress shirts/blouses, nylons, lingerie, or sheer and lacy clothes which can easily be damaged. Dry Level Default: Normal Available: All Temperature Default: Low Available: Low Cycle Towels Description Use this cycle for drying towels.
OPERATION WARNING - Do not touch the steam nozzle in the drum during or after the steam cycle. • Do not use steam cycles with the following clothes, as they may be damaged. - Steam SanitaryTM: Urethane foam, down feathers or delicate items - Steam FreshTM: Wool, wool blankets, leather jackets, silk, lingerie, foam products, or electric blankets. NOTE • The Steam SanitaryTM and Steam FreshTM cycles are designed for use with dry clothing.
OPERATION 39 Selectable Drying Options Option Energy Saver† Reduce Static Wrinkle Care Damp Dry Signal # # # # Heavy Duty # # # Bedding # Normal Antibacterial # Perm. Press # # # Delicates # # # Towels # # # Speed Dry # # Air Dry # Steam SanitaryTM # Steam FreshTM # † This option helps to reduce the energy use by drying clothes at lower temperatures than the normal mode. When this option is set, the drying time will increase.
OPERATION Cycle Modifiers About Modifier Buttons Each cycle has default settings that are selected automatically. Customize these settings using the cycle modifier buttons. Repeatedly press the button for the desired modifier until the indicator light for the desired setting is lit. Not every option is available with every cycle. If a modifier is not available, the button chimes twice and the setting does not change. Dry Level Use this button to select the dryness level for the cycle.
OPERATION 41 Options and Extra Functions Select the desired option after selecting the desired cycle and settings. NOTE • The LED for the option will light up when the option is selected. • To protect your garments, not every option is available with every cycle. • A chime will sound twice and the LED will not light up if the selected option is not allowed for the selected cycle. TurboSteam Use this function to add steam to a cycle. This function helps reduce wrinkles and odor in fabrics.
OPERATION Energy Saver Wrinkle Care This option helps to reduce the energy consumption of the Normal cycle, depending on the load size. When the Energy Saver option is selected, the cycle begins with an air dry section and the drying time is increased. Selecting this option will tumble the load periodically for up to 3 hours after the selected cycle, or until the door is opened. This is helpful in preventing wrinkles when you are unable to remove items from the dryer immediately.
OPERATION 43 Damp Dry Signal Press the Damp Dry Signal button before you start a drying cycle. ENGLISH When this option is selected, the appliance signals when the load is approximately 80% dry. This allows you to remove faster-drying lightweight items or items that you would like to iron or hang while they are still slightly damp.
SMART FUNCTIONS SMART FUNCTIONS LG ThinQ Application The LG ThinQ application allows you to communicate with the appliance using a smartphone. LG ThinQ Application Features • Dryer Cycle - Download new and specialized cycles that are not included in the standard cycles on the appliance. Appliances that have been successfully connected to the LG ThinQ application can download a variety of specialty cycles specific to the appliance.
SMART FUNCTIONS 45 3 NOTE • You may be asked to provide a password to connect to the LG network (not your home network) during the Wi-Fi setup. The password is the last 4 characters of the network name, repeated twice, with no spaces. For example, if the network name appears as LG_XXXX_8b92, then you would enter 8b928b92 as your password. The password is case sensitive and the last 4 characters are unique to your appliance.
SMART FUNCTIONS Wireless LAN Module Specifications Frequency Range 2412 - 2462 MHz Output Power (Max) < 30 dBm FCC Notice The following notice covers the transmitter module contained in this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SMART FUNCTIONS 47 • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions provided in the LG ThinQ application. Follow the instructions below to use the audible diagnosis method. • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions for audible diagnosis provided in the LG ThinQ application. 1 Press the Power button to turn on the appliance. • Do not press any other buttons.
MAINTENANCE MAINTENANCE WARNING • Unplug the appliance before cleaning. • Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They will damage the finish. Regular Cleaning Cleaning the Exterior Cleaning the Lint Filter Always clean the lint from the filter after every cycle. Proper care of your appliance can extend its life. The outside of the appliance can be cleaned with warm water and a mild, nonabrasive household detergent.
MAINTENANCE 49 3 NOTE • NEVER operate the appliance without the lint filter in place. ENGLISH If the lint filter has become very dirty or clogged with fabric softener, wash the lint filter in warm, soapy water and allow it to dry thoroughly before reinstalling.
TROUBLESHOOTING TROUBLESHOOTING FAQs Frequently Asked Questions Q: When I press a button, why does my dryer beep and then nothing happens? A: The Control Lock feature is turned on. To turn off Control Lock, turn the dryer on and press and hold the button that has Control Lock on or under it for 3 seconds. Q: Why does my dryer take so long to dry clothes? A: Proper airflow is critical to the efficient operation of clothes dryers.
TROUBLESHOOTING 51 Before Calling for Service Error Messages Problem tE1 through tE7 Possible Cause & Solution Temperature sensor failure. • Turn off the appliance and call for service. Power cord is connected incorrectly. Ps • Check the connection of the power cord to the terminal block. d8O, dGO, dGs Exhaust system is too long or has too many turns/restrictions. • Do not use the appliance until the exhaust system has been cleaned and/or repaired.
TROUBLESHOOTING Problem Possible Cause & Solution The appliance will not turn on. House fuse is blown, circuit breaker has tripped, or power outage has occurred. The appliance does not heat. House fuse is blown, circuit breaker has tripped, or power outage has occurred. • Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualified electrician. • Reset circuit breaker or replace fuse. Do not increase fuse capacity.
TROUBLESHOOTING 53 Problem Drying time is not consistent. Possible Cause & Solution Heat settings, load size, or dampness of clothing is not consistent. Performance Problem Clothes are wrinkled. Possible Cause & Solution Clothes dried too long (overdried). • Overdrying a load of laundry can lead to wrinkled clothes. Try a shorter drying time or use a lower dry level setting and remove items while they still retain a slight amount of moisture. Clothes left in dryer too long after cycle ends.
TROUBLESHOOTING Problem Excess static in clothes after drying. Possible Cause & Solution Fabric softener is not used or is used incorrectly. • Use a fabric softener or the Reduce Static option, if available, to reduce static electricity. Be sure to follow the manufacturer’s instructions. Clothes dried too long (overdried). • Overdrying a load of laundry can cause a buildup of static electricity. Adjust settings and use a shorter drying time, or use Manual Dry cycles.
TROUBLESHOOTING 55 Problem Possible Cause & Solution This is normal. Cannot see steam vapor at the beginning of cycle. This is normal. Odors remain in clothing after Steam Steam FreshTM did not remove odor completely. FreshTM. • The drum is turned off so that the steam vapor remains in the drum. The drum will normally turn for about 2 seconds once a minute. • Steam is released at different stages of the cycle for each option. • Fabrics containing strong odors should be washed in a normal cycle.
TROUBLESHOOTING Problem Trouble connecting appliance and smartphone to Wi-Fi network. Possible Cause & Solution During Wi-Fi setup, the app is requesting a password to connect to the product (on certain phones). • Locate the network name which starts with "LG" under Settings > Networks. Note the last part of the network name. - If the network name looks like LGE_Appliance_XX-XX-XX, enter lge12345. - If the network name looks like LGE_Appliance_XXXX, enter XXXX twice as your password.
LIMITED WARRANTY 57 LIMITED WARRANTY TERMS AND CONDITIONS ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG ELECTRONICS (“LG”) TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW.
LIMITED WARRANTY • Damage or failure of the Product resulting from operating the Product in a corrosive atmosphere or contrary to the Product owner’s manual. • Damage or failure of the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, acts of nature, or any other causes beyond the control of LG.
LIMITED WARRANTY 59 You and LG agree to engage in good faith discussions in an attempt to amicably resolve your claim. The notice must provide your name, address, and telephone number; identify the product that is the subject of the claim; and describe the nature of the claim and the relief being sought. If you and LG are unable to resolve the dispute within 30 days, either party may proceed to file a claim for arbitration. Arbitration Rules and Procedures.
LIMITED WARRANTY www.lg.com/us/support/repair-service/schedule-repair-continued and clicking on “Find My Model & Serial Number”). You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure.
Memo 61
Memo
Memo 63
LG Customer Information Center For inquiries or comments, visit www.lg.com or call: 1-800-243-0000 1-888-542-2623 U.S.A. CANADA Register your product Online! www.lg.