ENGLISH OWNER’S MANUAL DVD Micro Hi-Fi System Please read this manual carefully before operating your set and retain it for future reference. DM2740 (DM2740, CMS2730F) www.lg.com DM2740-FB_DAUSLLK_ENG.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. yy The appliance is not intended for use by young children or infirm persons without supervision. yy Young Children should be supervised to ensure that they do not play with appliance. yy If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.
Table of Contents Table of Contents 1 Getting Started 2 6 6 7 7 7 7 7 8 9 10 12 Safety Information Unique Features Accessories Introduction – Playable Discs – About the “7” Symbol Display – Symbols Used in this Manual – Regional Codes Playable file Requirement Remote control Front panel Rear panel 2 Connecting 13 13 14 15 15 16 16 16 16 16 17 18 Attaching the speakers to the unit Connections to Your TV – HDMI Out Connection – Video Connection – Resolution Setting Optional Equipment Connection – A
Table of Contents 4 Operating 5 Troubleshooting 23 23 24 24 24 24 24 25 25 25 25 25 25 26 26 27 28 28 28 29 29 29 29 30 30 30 30 30 31 31 31 32 32 33 33 Using the Home Menu Basic Operations Other Operations – Displaying Disc Information on-screen – To display the DVD Menu – To display the DVD title – 1.
Getting Started Unique Features 1 Portable In Accessories Please check and identify the supplied accessories. Getting Started Listens to music from your portable device. (MP3, Notebook, etc) USB Direct Recording Records music from CD to your USB device. Remote control (1) Battery (1) FM antenna (1) Video cable (1) Full HD up-scaling Views Full HD picture quality with simple setup. Bluetooth Listens to music stored on your bluetooth device.
Getting Started Introduction Playable Discs DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented. DVD±R (8 cm / 12 cm disc) Video mode and finalized only. DVD-RW (8 cm / 12 cm disc) Video mode and finalized only. DVD+R: Video mode only Supports the double layer disc also. DVD+RW (8 cm / 12 cm disc) Video mode and finalized only. Audio CD: Music CDs or CD-R/CDRW in music CD format that can be purchased.
Getting Started Playable file Requirement 1 Getting Started Music file requirement MP3/ WMA file compatibility with this unit is limited as follows : yy Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA) yy Support Version : v2, v7, v8, v9 yy Maximum files : Under 999 yy File extensions : “.mp3”/ “.
Getting Started Remote control 9 • • • • • • a • • • • • • • • • • • • d • • • • • • P RADIO&INPUT: Changes input sources. SPEAKER LEVEL: Sets the sound level of desired speaker. MARKER: Marks play list. SOUND EFFECT: Selects a sound effect mode. B OPEN/CLOSE: Ejects or insert the disc from slot loader. SLEEP: Sets the System to turn off automatically at a specified time. (Dimmer : The display window will be darken by half.) m INFO/DISPLAY: Accesses OnScreen Display.
Getting Started Front panel 1 Getting Started DM2740-FB_DAUSLLK_ENG.
Getting Started a Disc Slot Insert a disc in the disc slot with the label side left. b c 1/! (POWER) Switches the unit ON or OFF. >>Caution Precautions in using the touch buttons yy Use the touch buttons with clean and dry hands. - In a humid environment, wipe out any moisture on the touch buttons before using. d Display window Shows the current status of the unit. yy Do not press the touch buttons hard to make it work. - If you apply too much strength, it can damage the sensor of the touch buttons.
Getting Started Rear panel 1 Getting Started a HDMI OUT Connects to TV with HDMI inputs. (Interface for digital audio and video) b ANTENNA (FM) Connects the FM wired antenna e SPEAKERS terminal f Cooling Fan g Power cord c VIDEO OUT Connects to a TV with video inputs. d OPTICAL IN Connects to optical audio equipment. DM2740-FB_DAUSLLK_ENG.
Connecting 13 Attaching the speakers to the unit Connections to Your TV To connect the cable to the unit, press each plastic finger pad to open the connection terminals on the unit. Insert the wire and release the finger pad. Make one of the following connections, depending on the capabilities of your existing equipment. Connect the black stripe of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus).
Connecting HDMI Out Connection If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable (Type A, High Speed HDMI™ cable). Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). 2 Connecting Unit ,,Note yy If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output.
Connecting 15 Video Connection Resolution Setting Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. The unit provides several output resolutions for HDMI OUT TO TV. You can change the resolution using [Setup] menu. You can hear the sound through the system’s speakers. Unit 1. Press n HOME. 2. Use A/D to select the [Setup] and press b ENTER. The [Setup] menu appears. 2 Connecting TV 3.
Connecting Optional Equipment Connection OPTICAL In connection Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN connector. AUDIO (PORT. IN) In Connection 2 Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. Connecting To the digital optical output jack of your component Speaker ez setup Listening to music from your portable player or external device Listen to sound from TV, DVD and Digital Device with 2 ch mode.
Connecting 17 Antenna Connection Connect the supplied FM antenna for listening to the radio. Connect the FM wire antenna to the FM antenna connector. 2 Connecting ,,Note Be sure to fully extend the FM wire antenna. DM2740-FB_DAUSLLK_ENG.
Connecting USB Connection Compatible USB Devices Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. yy MP3 Player : Flash type MP3 player. yy USB Flash Drive : Devices that support USB2.0 or USB1.1. yy The USB function of this unit does not support some USB devices. USB device requirement 2 Connecting ,,Note Removing the USB Device from the unit 1.
3 System Setting System Setting Adjust the setup settings By using the Setup menu, you can make various adjustments to items such as picture and sound. 19 To display and exit the Setup menu 1. Press n HOME. Displays the [Home Menu]. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 19 to 22. 2. Select an [Setup] by using A D. 3. Press b ENTER. Displays the [Setup].
System Setting Language Display Mode Menu Language The Display Mode setting works only when the TV Aspect mode is set to 4:3. Select a language for the Setup menu and then on screen display. [Letterbox] Disc Audio / Disc Subtitle / Disc Menu [Panscan] Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] 3 Refers to the original language in which the disc was recorded.
System Setting 21 Audio Lock (Parental Control) DRC (Dynamic Range Control) Initial Setting the Area Code Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. When you use this unit for the first time, you have to set the Area Code. Vocal Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only. HD AV Sync 3. Select the first character using WS buttons. 4.
System Setting Password Others You can enter or change password. 1. Select [Password] on the [Lock] menu and then press D. 2. Press b ENTER. 3. Input a password and press b ENTER. To change the password, press b ENTER when the [Change] option is highlighted. Input a password and press b ENTER. Enter it again and press b ENTER to verify. 4. Press n HOME to exit the menu. ,,Note 3 If you forget your password, you can clear it using the following steps: System Setting 1.
Operating 23 Using the Home Menu 1. Press n HOME. Displays the [Home Menu]. To Stop Playback Pause Do this Press Z STOP Press d PLAY, MONO/STEREO Press M PAUSE/STEP Press M PAUSE/STEP Frame-byrepeatedly to play title FrameFrame playback by-Frame. (DVD, DivX only) 2. Select an option by using AD. 3. Press b ENTER then selected option menu. [Music] – Displays [MUSIC] menu. [Movie] – Start video media’s playback or displays the [MOVIE] menu. [Photo] – Displays [PHOTO] menu.
Operating Other Operations Displaying Disc Information on-screen You can display various information about the disc loaded on-screen. 1. Press m INFO/DISPLAY to show various playback information. The displayed items differ depending on the disc type or playing status. 2. You can select an item by pressing WS and change or select the setting by pressing AD. Title – Current title number/ total number of titles. Chapter – Current chapter number/ total number of chapters.
Operating 25 Starting play from selected time ry To start playing at any chosen time on the file or title. Changing subtitle code page y If the subtitle is not displayed properly, you can change the subtitle code page to view the subtitle file properly. 1. Press m INFO/DISPLAY during playback. 1. During playback, press m INFO/DISPLAY to display the On-Screen display. 2. Press WS to select the time clock icon and “--:--:--” appears. 2. Use WS to select the [Code Page] option. 3.
Operating Marked Playback ut The mark function enables you to store your favourite files from any disc or USB device in the unit memory. 1. Select [Music] on the [Home Menu]. Returning to the upper folder. (MP3/ WMA only) File information will be displayed according to the ID3TAG information on the appropriate music file. (MP3 only) To delete a Marker 1. Use WS to select the track that you wish to erase from the marked file. 2. Press MARKER.
Operating 27 About help menu in the [Photo] menu Menu Buttons d Slide Show d PLAY, MONO/ STEREO Operation wsad Move SWAD Moving to another file or content. b Select b ENTER Viewing a particular file. x Close x RETURN Viewing a slide show. Options while viewing a photo You can use various options during viewing a photo in full screen. 1. While viewing a photo in full screen, press m INFO/DISPLAY to display the option menu. 2. Select an option using WSAD. Returning to the [Home Menu].
Operating Setting the Clock 1. Turn the unit on. 2. Press and hold CLOCK. 3. Select time mode by pressing C/V. - AM 12:00 (for an AM and PM display) or 0:00 (for a 24 hour display) 4. Press SET/DEMO to confirm your selection. 5. Select the hours by pressing C/V. 6. Press SET/DEMO. 7. Select the minutes by pressing C/V. ,,Note yy If you set the clock time, you can check the time by pressing CLOCK even when the player is turned off.
Operating 29 Dimmer Press SLEEP once. The display window will be darken by half. To cancel it, press SLEEP repeatedly until dim off. If touch the buttons in Sleep Timer mode, the buttons will be lightening for 5 seconds and darkening again. Turn off the sound temporarily Press MUTE to mute your unit. You can mute your unit, for example, to answer the telephone, the “q” is displayed in the display window. DEMO In the power off state, it demonstrates the function on display window by pressing DEMO.
Operating Radio Operations Listening to the radio 1. Press P RADIO&INPUT until FM appears in the display window. The last received station is tuned in. 2. Press and hold TUNING (-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station. Or Deleting a saved station 1. Press PRESET +/- to Select a preset number you want to delete. 2. Press CLEAR, the preset number will blink in the display window. 3.
Operating Sound adjustment ,,Note Setting the surround mode yy In some of surround modes, some speakers, there’s no sound or low sound. It depends on the mode of surround and the source of audio, it is not defective. This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT. yy You may need to reset the surround mode, after switching the input, sometimes even after the sound track changed.
Operating Advanced Operations Recording to USB You can record music or sound souce to USB device by connecting in to the port on the unit. yy During recording MP3/WMA, there is no sound. 1. Connect the USB device to the unit. yy When you stop recording during playback, the file that has been recorded at that time will be stored. (Audio CD only) 2. Select a mode in which you want to record. Play back a sound source first. 3. Start the recording by pressing X REC. 4. To stop recording, press Z STOP.
Operating 33 Using a Bluetooth® wireless technology About Bluetooth Bluetooth is wireless communication technology for short range connection. The sound may be interrupted when the connection interfered by the other electronic wave or you connect the bluetooth in the other rooms. Connecting individual devices under Bluetooth® wireless technology does not incur any charges.
Operating ,,Note yy When using Bluetooth® technology, you have to make a connection between the unit and the bluetooth device as close as possible. However it may not work well in the case below : -- There is a obstacle between the unit and the bluetooth device. -- There is a device using same frequency with Bluetooth® technology such as a medical equipment, a microwave or a wireless LAN device. yy You should connect your Bluetooth device to this unit again when you restart it.
Operating 35 Pairing your unit and Bluetooth device through NFC Tag About NFC Tag Connect to the Bluetooth by using the Bluetooth devices that support NFC. 1. Activates the NFC feature of your NFC-enabled phone. ,,Note yy Please use a device which the NFC feature is available. yy NFC Recognition area may be different depending on the type of Bluetooth device. Please check the position of NFC recognition area of the Bluetooth device before tagging. 2. Turn on the unit.
Troubleshooting Troubleshooting PROBLEM No power No picture CORRECTION Plug the power cord into the wall outlet securely. Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. Connect the video cables securely to both the TV and unit. Select the correct input mode of the unit so you can hear the sound from the unit. There is little or no sound Connect the audio cables into the connection terminals correctly. Replace with a new audio cable.
6 Appendix Appendix 37 Area Code List Choose an area code from this list.
Appendix Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix 39 Trademarks and Licenses DivX Certified® to play DivX® video, including premium content. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
Appendix Specifications General Power requirements Refer to the main label. Power consumption Refer to the main label. Dimensions (W x H x D) (135 x 295 x 315) mm Net Weight (Approx.) 3.7 kg Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Inputs/ Outputs VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 HDMI OUT (video/audio): 19 pin Type A, HDMI™ Connector DIGITAL IN (OPTICAL): 3 V (p-p), Optical jack x 1 PORT. IN 0.6 Vrms (3.
Appendix 41 Front Speaker Type 3 Way 4 speaker Impedance 4Ω Rated Input Power 80 W Max. Input Power 160 W Dimensions (W x H x D) (126 X 295 X 315) mm Net Weight 3.5 kg yy Design and specifications are subject to change without notice. 6 Appendix DM2740-FB_DAUSLLK_ENG.
Appendix Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.
DM2740-FB_DAUSLLK_ENG.
DM2740-FB_DAUSLLK_ENG.
