ENGLISH OWNER’S MANUAL DVD Player Please read this manual carefully before operating your set and retain it for future reference. DP126 DP126-P.BINDLL_0631-ENG.
DP126-P.BINDLL_0631-ENG.
Getting Started 3 Safety Information CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Table of Contents 5 Table of Contents 1 Getting Started 4 Operating 3 6 6 6 6 6 6 7 8 9 9 Safety Information Introduction – About the “7” Symbol Display – Symbols Used in this Manual – Supplied Accessories – Playable Discs – Regional Code – File compatibility Remote control Front panel Rear panel 14 14 14 14 15 15 15 16 17 General Playback – Playing a Disc – Playing a file – On-Screen Display – General operation Advanced Playback – Movie – Music – Photo 5 Troubleshooting 2 Connecting 18 Troub
Getting Started Introduction Playable Discs DVD-VIDEO (8 cm / 12 cm disc) 1 About the “7” Symbol Display Getting Started “7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. Symbols Used in this Manual A section whose title has one of the following symbols are applicable only to the disc or file represented by the symbol.
Getting Started File compatibility 7 Photo Files Photo size: Less than 2M recommended. Overall yy The file name is limited to 35 characters. yy Depending on the size and number of the files, it may take several minutes to read the contents on the media. Maximum Files/Folder: Less than 600 (total number of files and folders) yy Progressive and lossless compression photo image files are not supported. Notes of USB Device yy This unit supports USB device with FAT16 or FAT32 format.
Getting Started Remote control • • • • • • • • • • c• • • • • • • • • • • 1 DVD MENU: Accesses or exits the DVD menu. Getting Started TITLE: Accesses the disc’s title menu, if available. w/s/a/d: Navigates the menus. ENTER (b): Confirms menu selection. DISPLAY: Accesses or exits On-Screen Display. RETURN (x): Moves backward or exit the menu. AUDIO ([): Selects an audio language or audio channel. SUBTITLE (]): Selects a subtitle language. ANGLE (}): Selects a DVD camera angle, if available.
Getting Started 9 Front panel ͦ ͧ ͨ a Disc Tray e 1 (Power) b Power indicator f Remote sensor c B (Open/Close) g USB Port Getting Started DC 5 V 0 500 mA 1 d N (Play/Pause) Rear panel REAR FRONT WOOFER CENTER 5.1CH AUDIO OUTPUT a AC power cord e 5.1 CH AUDIO OUTPUT (WOOFER) b 5.1 CH AUDIO OUTPUT (REAR Left/Right) f 5.1 CH AUDIO OUTPUT (CENTER) c VIDEO OUTPUT g AUDIO OUTPUT (Left/Right) 5.1 CH AUDIO OUTPUT (FRONT Left/Right) d DIGITAL AUDIO OUTPUT (COAXIAL) DP126-P.BINDLL_0631-ENG.
Connecting Connecting to your TV Connecting Video / Audio cable 2 Connect the VIDEO/AUDIO OUTPUT on the unit to VIDEO/AUDIO IN on TV with Video/Audio cable, such as VIDEO with yellow, AUDIO Left/Right with white/ red. Connecting to an Amplifier Connecting Audio cable Connect the AUDIO OUTPUT on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red. Connecting REAR REAR FRONT FRONT WOOFER WOOFE CENTER CENTER NT AUDIO OUTPUT 5.1CH AUDIO OUTPUT 5.
Connecting Connecting COAXIAL (digital audio) cable Connecting 5.1 CH Audio Cables Connect one of the unit’s DIGITAL AUDIO OUTPUT (COAXIAL) jacks to the corresponding jack on your amplifier. Connect a amplifer with analog 5.1 channel input jacks. 11 Rear of the Unit EAR 2 REAR FRONT FRONT Connecting CENTER DIO OUTPUT WOOFER FER Rear of the Unit CENTER ER 5.
System Setting Settings Adjust the Setup Settings You can change the settings of the unit in the [Setup] menu. TV Aspect Select which screen aspect to use based on the shape of your TV screen. 1. Press SETUP. [4:3]: Select when a standard 4:3 TV is connected. 2. Use w/s to select the first setup option, and press d to move to the second level. [16:9]: Select when a 16:9 wide TV is connected. 3. Use w/s to select a second setup option, and press d to move to the third level. 3 [DISPLAY] Menu 4.
System Setting 13 Speaker Setup Rating Selects an option according to the analog audio connection. Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating. [2 Ch]: Selects when 2 Channel stereo system is connected to this unit. [5.1 Ch]: Selects when 5.1 Channel surround system is connected to this unit After selecting [5.1 Ch], you can set the 5.1 Ch speaker setup options. Press w/s to select an option then press a/d to adjust the setting.
4 14 Operating Operating General Playback On-Screen Display ry Playing a Disc rt 1. While playback, press DISPLAY to show various playback information. 1. Press OPEN/CLOSE (B), and place a disc on the disc tray. 2. Press OPEN/CLOSE (B) to close the disc tray For the most DVD-ROM discs, playback starts automatically. For the Audio CD, select a track using w/s/a/ d and press PLAY (z) or ENTER (b) to play the Track. Playing a file yui 1.
Operating General operation 15 Advanced Playback To Do this Playback Press PLAY (z) Pause Press PAUSE/STEP (M) Movie ry Stop Press STOP (Z) To Do this Display disc menu Press DVD MENU. (DVD Only) Play repeatedly Press REPEAT during playback. To select an option to be repeated, Press REPEAT repeatedly. Skip to the next Press C or V during or previous playback. Fast forward or Press c or v during fast reverse playback.
Operating Slow down the While the playback is paused, playing speed press v repeatedly to play (Forward only) various speeds of slow motion. Press PLAY (z) to continue play at normal speed. Watch an During playback or pause mode, enlarged video press ZOOM repeatedly to select zoom mode. ZOOM: 100% : 200% : 300% : 400% : 100% w/s/a/d: Move through the zoomed picture. Music tu To Do this Play repeatedly Press REPEAT during playback. To select an item to be repeated, Press REPEAT repeatedly.
Operating ,,Note yy If you use this function, the “CD_REC” folder will be created automatically in the USB Flash Driver then the music file(s) is saved in it. yy If you remove USB Flash Drive, turn off or open the unit while recording, it can make a malfunction. yy If the remaining space on the USB Flash Drive is insufficient, the recording is not available. To increase the free space, delete files in it using your PC. yy CD-G disc and Audio CDs encoded in DTS cannot be recorded.
5 Troubleshooting 18 Troubleshooting Troubleshooting Symptom Cause No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but the unit does not work. No disc is inserted. Insert a disc. The unit does not start playback. An unplayable disc is inserted. Insert a playable disc. (Check the disc type and regional code.) The rating level is set. Change the rating level. The remote control The remote control is not does not work properly.
Appendix 19 Area Code List Choose an area code from this list.
Appendix Language Code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Specifications Power requirements AC 110-240 V, 50 / 60 Hz Power consumption 11 W Dimensions (W x H x D) (270 x 37.5 x 203) mm Net Weight (Approx.) 0.92 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Laser Semiconductor laser Signal system PAL / NTSC Bus Power Supply (USB) DC 5 V 0 500 mA VIDEO OUTPUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 ANALOG AUDIO OUTPUT 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack x 6 DIGITAL AUDIO OUTPUT (COAXIAL) 0.
DP126-P.BINDLL_0631-ENG.