OWNER’S MANUAL DVD PLAYER Please read this manual carefully before operating your set and retain it for future reference. DP132H www.lg.com Copyright © 2017 LG Electronics Inc. All Rights Reserved.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. Notes on Copyrights This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Under the U.S.
Getting Started Notes on Discs 1 yy Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. Getting Started yy After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Notes on the Unit yy Please save the original shipping carton and packing materials.
Table of Contents 5 Table of Contents 1 Getting Started 4 Operating 2 6 6 6 6 6 6 7 8 9 9 Safety Information Introduction – About the “7” Symbol Display – Symbols Used in this Manual – Supplied Accessories – Playable Discs – Regional Code – File Compatibility Remote Control Front Panel Rear Panel 14 14 14 14 15 15 15 16 17 General Playback – Playing a Disc – Playing a File – On-Screen Display – General Operation Advanced Playback – Movie – Music – Photo 5 Troubleshooting 2 Connecting 18 Troub
Getting Started Introduction Playable Discs DVD-VIDEO (8 cm / 12 cm disc) 1 About the “7” Symbol Display Getting Started “7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. Symbols Used in this Manual A section whose title has one of the following symbols are applicable only to the disc or file represented by the symbol.
Getting Started File Compatibility 7 Photo Files Photo size: Less than 2M recommended. Overall yy The file name is limited to 35 characters. yy Depending on the size and number of the files, it may take several minutes to read the contents on the media. Maximum Files/Folder: Less than 600 (total number of files and folders) yy Progressive and lossless compression photo image files are not supported. Notes of USB Device yy This unit supports USB device with FAT16 or FAT32 format.
Getting Started Remote Control AUDIO ([): Selects an audio language or audio channel. 1 Getting Started SUBTITLE (]): Selects a subtitle language. ANGLE (}): Selects a DVD camera angle, if available. SETUP: Accesses or exits the setup menu. • • • • • • • • • • d• • • • • • • • • • • MARKER: Marks any point during playback. SEARCH: Displays MARKER SEARCH menu. PROGRAM: Enters the program edit mode. ZOOM: Enlarges video image. REPEAT: Repeats a chapter, track, title or all.
Getting Started 9 Front Panel ͦ ͧ 1 Getting Started a Disc Tray d R (Open/Close) b Remote sensor e 1/! (Power) c Power indicator f USB Port Rear Panel a AC power cord c VIDEO OUTPUT b AUDIO OUTPUT (Left/Right) d HDMI
Connecting Connecting to your TV Connecting Video / Audio Cable 2 Connect the VIDEO/AUDIO OUT on the unit to VIDEO/AUDIO IN on TV with Video/Audio cable, such as VIDEO with yellow, AUDIO Left/Right with white/ red. Additional Information for HDMI yy When you connect a HDMI or DVI compatible device, make sure of the following: -- Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit.
Connecting Connecting to an Amplifier Connecting Audio Cable Connect the AUDIO OUT (L/R) on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red. Connecting HDMI Cable Connect the HDMI OUT on the unit to the HDMI IN on amplifier with HDMI cable. (Type A, High Speed HDMI™ Cable) Connect the HDMI OUT jack on amplifier to HDMI IN jack on TV with HDMI cable, if the amplifier has HDMI OUT jack.
System Setting Settings When the unit is turned-on at the first time, you have to select the desired language. (Optional) Adjust the Setup Settings You can change the settings of the unit in the [Setup] menu. 1. Press SETUP. 2. Use w/s to select the first setup option, and press d to move to the second level. 3 3. Use w/s to select a second setup option, and press d to move to the third level. System Setting 4. Use w/s to select a desired setting, and press ENTER (b) to confirm your selection.
System Setting Sample Freq. (Frequency) [OTHERS] Menu Selects the sampling frequency of the audio signal between [48 kHz] and [96 kHz]. B.L.E (Black Level Expansion) DRC (Dynamic Range Control) To select the black level of playback pictures, set your preference and monitor’s ability. 13 Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal Set to [On] only when a multi-channel karaoke DVD is playing.
Operating General Playback On-Screen Display ry Playing a Disc rt 1. While playback, press DISPLAY to show various playback information. 1. Press OPEN/CLOSE (B), and place a disc on the disc tray. 2. Press OPEN/CLOSE (B) to close the disc tray For the most DVD-ROM discs, playback starts automatically. For the Audio CD, select a track using w/s/ a/d, and press PLAY (z) or ENTER (b) to play the track. Playing a File yui 1.
Operating General Operation Advanced Playback To Do this Playback Press PLAY (z) Movie ry Pause Press PAUSE/STEP (M) Stop Press STOP (Z) Skip to the next Press C or V during or previous playback To Do this Display disc menu Press DVD MENU. (DVD Only) Play repeatedly Press REPEAT during playback. To select an option to be repeated, Press REPEAT repeatedly. Fast forward or Press c or v during fast reverse playback. Resume playback Press STOP (Z) during playback to save the stopped point.
Operating Slow down the While the playback is paused, playing speed press v repeatedly to play (Forward only) various speeds of slow motion. Press PLAY (z) to continue play at normal speed. Watch an During playback or pause mode, enlarged video press ZOOM repeatedly to select zoom mode. ZOOM: 100% 200% 300% 400% 100% w/s/a/d: Move through the zoomed picture. Music tu To Do this Play repeatedly Press REPEAT during playback. To select an item to be repeated, Press REPEAT repeatedly.
Operating 17 Photoi To Do this View photo files as a slide show Use w/s/a/d to highlight (`) icon then press ENTER (b) to start slide show. Adjust slide show speed You can change slide show speed using a/d when (J) icon is highlighted. Rotate a photo Use w/s to rotate the photo in full screen counterclockwise or clockwise while viewing a photo in full screen. Watch an While viewing a photo in full enlarged Photo screen, press ZOOM repeatedly to select zoom mode.
Troubleshooting Troubleshooting Symptom Cause No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but the unit does not work. No disc is inserted. Insert a disc. The unit does not start playback. An unplayable disc is inserted. Insert a playable disc. (Check the disc type and regional code.) The rating level is set. Change the rating level. The remote control The remote control is not does not work properly.
Appendix 19 Area Code List Choose an area code from this list.
Appendix Language Code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Specifications Power requirements 200 – 240 V ~ 50 / 60 Hz Power consumption 9W Dimensions (W x H x D) (250 x 37.5 x 203) mm Net Weight (Approx.) 0.9 kg Operating temperature 0 °C to 40 °C Operating humidity 5 % to 90 % Laser Semiconductor laser Signal system PAL / NTSC Bus Power Supply (USB) 5 V 0 200 mA VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 HDMI OUT (video/ audio) 19 pin (Type A, HDMI™ Connector) ANALOG AUDIO OUT 2.