Owner's Manual

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated

circuit;

That is, a single outlet circuit which powers only that appliance

and has no additional outlets or branch circuits. Check the specifi-

cation page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or

damaged wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous. Any of these

conditions could result in electric shock or fire. Periodically exam-

ine the cord of your appliance, and if its appearance indicates

damage or deterioration, unplug it, discontinue use of the appli-

ance, and have the cord replaced with an exact replacement part

by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such

as being twisted, kinked, pinched, closed in a door, or walked

upon. Pay particular attention to plugs, wall outlets, and the point

where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug.

When installing the product, ensure that the plug is easily accessi-

ble.

This product is manufactured to comply with the

radio interference requirements of EEC DIRECTIVE

89/336/EEC, 93/68/EEC and 73/23/EEC.

1. When this crossed-out wheeled bin symbol is attached

to a product it means the product is covered by the

European Directive 2002/96/EC.

2. All electrical and electronic products should be dis-

posed of separately from the municipal waste stream

via designated collection facilities appointed by the

government or the local authorities.

3. The correct disposal of your old appliance will help

prevent potential negative consequences for the envi-

ronment and human health.

4. For more detailed information about disposal of your

old appliance, please contact your city office, waste

disposal service or the shop where you purchased the

product.

Safety Precautions (Continued)

Introduction