OWNER’S MANUAL DVD Player Please read this manual carefully before operating your set and retain it for future reference.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started 3 This device is equipped with a portable battery or accumulator. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. Notes on Copyrights This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Under the U.S.
Getting Started Notes on Discs 1 yy Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. Getting Started yy After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Notes on the Unit yy Please save the original shipping carton and packing materials.
Table of Contents 5 Table of Contents 1 Getting Started 4 Operating 2 6 6 6 6 6 6 7 8 9 9 Safety Information Introduction – About the “7” Symbol Display – Symbols Used in this Manual – Supplied Accessories – Playable Discs – Regional Code – File Compatibility Remote Control Front Panel Rear Panel 14 14 14 14 15 15 15 16 17 General Playback – Playing a Disc – Playing a File – On-Screen Display – General Operation Advanced Playback – Movie – Music – Photo 5 Troubleshooting 2 Connecting 18 Troub
Getting Started Introduction Playable Discs DVD-VIDEO 1 About the “7” Symbol Display Getting Started “7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. Symbols Used in this Manual A section whose title has one of the following symbols are applicable only to the disc or file represented by the symbol.
Getting Started File Compatibility 7 Photo Files Photo size: Less than 2M recommended. Overall yy The file name is limited to 20 characters. yy Depending on the size and number of the files, it may take several minutes to read the contents on the media. yy Progressive and lossless compression photo image files are not supported. Notes of USB Device (DP542 only) yy This unit supports USB device with FAT16 or FAT32 format.
Getting Started Remote Control • • • • • • • • • • c• • • • • • • • • • • 1 DVD MENU: Accesses or exits the DVD menu. Getting Started TITLE: Accesses the disc’s title menu, if available. w/s/a/d: Navigates the menus. ENTER (b): Confirms menu selection. DISPLAY: Accesses or exits On-Screen Display. RETURN (x): Moves backward or exit the menu. AUDIO ([): Selects an audio language or audio channel. SUBTITLE (]): Selects a subtitle language. ANGLE (}): Selects a DVD camera angle, if available.
Getting Started 9 Front Panel 1 a Disc Tray e T (Play/Pause) b Display window f 1/! (Power) c Remote sensor g USB Port (DP542 only) ͧ d R (Open/Close) Rear Panel a Power Cord d COMPONENT VIDEO OUT (Y PB PR) b AUDIO OUT (Left/Right) e DIGITAL AUDIO OUT (COAXIAL) c VIDEO OUT g Getting Started ͦ
Connecting Connecting to your TV Connecting Video / Audio Cable 2 Connect the VIDEO/AUDIO OUT on the unit to VIDEO/AUDIO IN on TV with Video/Audio cable, such as VIDEO with yellow, AUDIO Left/Right with white/ red. Connecting Component Video Cable Connect the COMPONENT VIDEO OUT (Y PB PR) jacks on the unit to the corresponding input jacks on the TV using Component video cable, such as Y with green, Pb with blue, and Pr with red.
Connecting Connecting to an Amplifier Connecting Audio Cable 11 Connecting COAXIAL (digital audio) Cable Connect one of the unit’s DIGITAL AUDIO OUT (COAXIAL) jacks to the corresponding jack on your amplifier. Rear of the Unit Connect the AUDIO OUT (L/R) on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red.
System Setting Settings When the unit is turned-on at the first time, you have to select the desired language. (Optional) Adjust the Setup Settings You can change the settings of the unit in the [Setup] menu. 1. Press SETUP. 2. Use w/s to select the first setup option, and press d to move to the second level. 3 3. Use w/s to select a second setup option, and press d to move to the third level. System Setting 4. Use w/s to select a desired setting, and press ENTER (b) to confirm your selection.
System Setting 13 [AUDIO] Menu Rating Set the player’s Audio options according to various disc output type you use. (Optional) Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating. Dolby Digital / DTS / MPEG Password Select the type of digital audio signal to use the DIGITAL AUDIO OUT jack. Sets or changes the password for lock settings.
Operating General Playback On-Screen Display ry Playing a Disc rt 1. While playback, press DISPLAY to show various playback information. 1. Press OPEN/CLOSE (B), and place a disc on the disc tray. 2. Press OPEN/CLOSE (B) to close the disc tray For the most DVD-ROM discs, playback starts automatically. For the Audio CD, select a track using w/s/ a/d, and press PLAY (z) or ENTER (b) to play the track. Playing a File yui 4 1.
Operating General Operation Advanced Playback To Do this Playback Press PLAY (z) Movie ry Pause Press PAUSE/STEP (M) Stop Press STOP (Z) Skip to the next Press C or V during or previous playback To Do this Display disc menu Press DVD MENU. (DVD Only) Play repeatedly Press REPEAT during playback. To select an option to be repeated, Press REPEAT repeatedly. Fast forward or Press c or v during fast reverse playback. Resume playback Press STOP (Z) during playback to save the stopped point.
Operating Music tu To Do this Play repeatedly Press REPEAT during playback. To select an item to be repeated, Press REPEAT repeatedly. yy Track/ ALL/ (REPEAT Off ) Create or delete your own program Press the PROGRAM to select desired file and then, { mark appears on screen. Using w/s and ENTER (b) to add a music file(s) on the program list, If you add desired music file(s), press PROGRAM to end edit program list.
Operating 17 Photo i To Do this View photo files as a slide show Use w/s/a/d to highlight (`) icon then press ENTER (b) to start slide show. Adjust slide show speed You can change slide show speed using a/d when (J) icon is highlighted. Rotate a photo Use w/s to rotate the photo in full screen counterclockwise or clockwise while viewing a photo in full screen. Watch an While viewing a photo in full enlarged Photo screen, press ZOOM repeatedly to select zoom mode.
Troubleshooting Troubleshooting Issue Cause No power The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but the unit does not work. No disc is inserted. Insert a disc. The unit does not start playback. An unplayable disc is inserted. Insert a playable disc. (Check the disc type and regional code.) The rating level is set. Change the rating level. The remote control The remote control is not does not work properly.
Appendix 19 Area Code List Choose an area code from this list.
Appendix Language Code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Specifications AC 200 - 240 V, 50 / 60 Hz Power consumption 9W Dimensions (W x H x D) (360 x 39.5 x 200) mm Net Weight (Approx.) 1.14 kg Operating temperature 0 °C - 40 °C Operating humidity 5 % - 90 % Laser Semiconductor laser Signal system PAL / NTSC Bus Power Supply (USB) 5V 0 200 mA (DP542 only) VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1, (Pb) /(Pr) 0.