ENGLISH OWNER’S MANUAL DVD Player Please read this manual carefully before operating your set and retain it for future reference. DP540 DP542 DP547 *MFL69620742* www.lg.
Getting Started 3 Safety Information CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with a rowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient m nitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Table of Contents 5 Table of Contents 1 Getting Started 4 Operating 3 6 6 6 6 6 6 7 8 9 9 Safety Information Introduction – About the “7” Symbol Display – Symbols Used in this Manual – Supplied Accessories – Playable Discs – Regional Code – File Compatibility Remote Control Front Panel Rear Panel 14 14 14 14 14 15 15 15 16 17 General Playback – Playing a Disc – Playing a File – Playing a Karaoke Disc (DP547 only) – On-Screen Display – General Operation Advanced Playback – Movie – Music – Photo
Getting Started Introduction Playable Discs DVD-VIDEO 1 About the “7” Symbol Display Getting Started “7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media Symbols Used in this Manual A section whose title has one of the following symbols are applicable only to the disc or file represented by the symbol. r t DVD-Video, DVD±R/RW Audio CDs Discs such as movies that can be purchased or rented.
Getting Started File Compatibility 7 Photo Files Photo size: Less than 2M recommended. Overall yy The file name is limi ed to 20 characters. yy Depending on the size and number of the file , it may take several minutes to read the contents on the media. yy Progressive and lossless compression photo image files a e not supported. Notes of USB Device (DP542/DP547 only) yy This unit supports USB device with FAT16 or FAT32 format.
Getting Started Remote Control • • • • • • • • • • c• • • • • • • • • • • 1 DVD MENU: Accesses or exits the DVD menu. Getting Started TITLE: Accesses the disc’s title menu, if available. w/s/a/d: Navigates the menus. ENTER (b): Confi ms menu selection. DISPLAY: Accesses or exits On-Screen Display. RETURN (x): Moves backward or exit the menu. AUDIO ([): Selects an audio language or audio channel. SUBTITLE (]): Selects a subtitle language. ANGLE (}): Selects a DVD camera angle, if available.
Getting Started 9 Front Panel 1 a Disc Tray e Remote sensor b MIC. (Microphone jack) (DP547 only) f R (Open/Close) c VOL.
Connecting Connecting to your TV Connecting Video / Audio Cable 2 Connect the VIDEO/AUDIO OUTPUT on the unit to VIDEO/AUDIO IN on TV with Video/Audio cable, such as VIDEO with yellow, AUDIO Left/Right with white/ red. Connecting Component Video Cable Connect the COMPONENT VIDEO OUT (Y PB PR) jacks on the unit to the corresponding input jacks on the TV using Component video cable, such as Y with green, PB with blue, and PR with red.
Connecting Connecting to an Amplifier Connecting Audio Cable Connecting COAXIAL (digital audio) Cable Connect one of the unit’s DIGITAL AUDIO OUTPUT (COAXIAL) jacks to the corresponding jack on your amplifie . Connect the AUDIO OUTPUT on the unit to 2CH AUDIO IN on amplifier with udio cable, such as AUDIO Left/Right with white/red. 2 Rear of the Unit Coaxial Cable Audio Cable OPTICAL Receiver / Amplifie yy If your TV is not capable of handling 96 kHz sampling frequency, set the [Sample Freq.
System Setting Settings When the unit is turned-on at the first tim , you have to select the desired language. (Optional) Adjust the Setup Settings You can change the settings of the unit in the [Setup] menu. 1. Press SETUP. 2. Use w/s to select the first setup option, and press d to move to the second level. 3 3. Use w/s to select a second setup option, and press d to move to the third level. System Setting 4. Use w/s to select a desired setting, and press ENTER (b) to confirm your selection.
System Setting [AUDIO] Menu Password Set the player’s Audio options according to various disc output type you use. Sets or changes the password for lock settings. Dolby Digital / DTS / MPEG To input the standardized area code referring the Area Code List on page 19. Select the type of digital audio signal to use the DIGITAL AUDIO OUTPUT jack. [Bitstream]: Select to connect DIGITAL AUDIO OUTPUT jack to an amplifier with olby Digital, DTS or MPEG decoder. 13 Area Code [OTHERS] Menu B.L.
4 14 Operating Operating General Playback Playing a Disc rt yy The VOICE and MELODY menus may not be available on some karaoke discs. 1. Press OPEN/CLOSE (B), and place a disc on the disc tray. yy For the microphone sound output through the DIGITAL AUDIO OUT jack, [Dolby Digital] or [MPEG] option must be set to [PCM] on SETUP menu. 2. Press OPEN/CLOSE (B) to close the disc tray For the most DVD-ROM discs, playback starts automatically.
Operating General Operation 15 Advanced Playback To Do this Playback Press PLAY (z) Pause Press PAUSE/STEP (M) Movie ry Stop Press STOP (Z) To Do this Display disc menu Press DVD MENU. (DVD Only) Play repeatedly Press REPEAT during playback. To select an option to be repeated, Press REPEAT repeatedly. Skip to the next Press C or V during or previous playback. Fast forward or Press c or v during fast reverse playback.
Operating Slow down the While the playback is paused, playing speed press v repeatedly to play (Forward only) various speeds of slow motion. Press PLAY (z) to continue play at normal speed. Watch an During playback or pause mode, enlarged video press ZOOM repeatedly to select zoom mode. ZOOM: 100% : 200% : 300% : 400% : 100% w/s/a/d: Move through the zoomed picture. Music tu To Do this Play repeatedly Press REPEAT during playback. To select an item to be repeated, Press REPEAT repeatedly.
Operating ,,Note (DP542/DP547 only) yy If you use this function, the “CD_REC” folder will be created automatically in the USB Flash Drive then the music file(s) is s ved in it. yy If you remove USB Flash Drive, turn off or open the unit while recording, it can make a malfunction. yy If the remaining space on the USB Flash Drive is insufficient, the ecording is not available. To increase the free space, delete files in it using our PC. yy CD-G disc and Audio CDs encoded in DTS cannot be recorded.
5 Troubleshooting 18 Troubleshooting Troubleshooting Symptom Cause No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but the unit does not work. No disc is inserted. Insert a disc. The unit does not start playback. An unplayable disc is inserted. Insert a playable disc. (Check the disc type and regional code.) The rating level is set. Change the rating level. The remote control The remote control is not does not work properly.
Appendix 19 Area Code List Choose an area code from this list.
Appendix Language Code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Specifications AC 110-240 V, 50 / 60 Hz Power consumption 9W Dimensions (W x H x D) (360 x 39.5 x 200) mm Net Weight (Approx.) 1.14 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Laser Semiconductor laser Signal system PAL / NTSC Bus Power Supply (USB) 5 V 0 200 mA (DP542/DP547 only) VIDEO OUTPUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 COMPONENT / PROGRESSIVE SCAN OUTPUT (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1, (Pb)/(Pr) 0.