ENGLISH OWNER’S MANUAL DVD Player Please read this manual carefully before operating your set and retain it for future reference. DP820H/DP822H P/NO : DP822H-P.BJORMLK_1144-ENG.
DP822H-P.BJORMLK_1144-ENG.
Getting Started 3 Safety Information CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Table of Contents 5 Table of Contents 1 Getting Started 4 Operating 3 6 6 6 6 6 6 7 8 9 9 Safety Information Introduction – About the “7” Symbol Display – Symbols Used in this Manual – Supplied Accessories – Playable Discs – Regional Code – File compatibility Remote control Front panel Rear panel 15 15 15 15 16 16 16 17 18 General Playback – Playing a Disc – Playing a file – On-Screen Display – General operation Advanced Playback – Movie – Music – Photo 5 Troubleshooting 2 Connecting 19 Troub
Getting Started Introduction Playable Discs DVD-VIDEO (8 cm / 12 cm disc) 1 About the “7” Symbol Display Getting Started “7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. Symbols Used in this Manual A section whose title has one of the following symbols are applicable only to the disc or file represented by the symbol.
Getting Started File compatibility 7 Photo Files Photo size: Less than 2M recommended. Overall yy The file name is limited to 35 characters. yy Progressive and lossless compression photo image files are not supported. Notes of USB Device (DP822H only) yy Depending on the size and number of the files, it may take several minutes to read the contents on the media. yy This unit supports USB device with FAT16 or FAT32 format.
Getting Started Remote control DISPLAY: Accesses or exits On-Screen Display. 1 RETURN (x): Moves backward or exit the menu. Getting Started AUDIO ([): Selects an audio language or audio channel. SUBTITLE (]): Selects a subtitle language. ANGLE (}): Selects a DVD camera angle, if available. SETUP: Accesses or exits the setup menu. • • • • • • • • • • d• • • • • • • • • • • MARKER: Marks any point during playback. SEARCH: Displays MARKER SEARCH menu. PROGRAM: Enters the program edit mode.
Getting Started 9 Front panel ͦ ͧ ͨ ͩ 1 Getting Started a Disc Tray e N (Play/Pause) b Display window f Z (Stop) c Remote sensor g 1 (Power) d B (Open/Close) h USB Port (DP822H only) Rear panel a AC power cord e VIDEO OUTPUT b HDMI OUTPUT f DIGITAL AUDIO OUTPUT (OPTICAL) c DIGITAL AUDIO OUTPUT (COAXIAL) g COMPONENT / PROGRESSIVE SCAN OUTPUT (Y PB PR) d AUDIO OUTPUT (Left/Right) DP822H-P.BJORMLK_1144-ENG.
Connecting Connecting to your TV Connecting Video / Audio cable 2 Connect the VIDEO/AUDIO OUTPUT on the unit to VIDEO/AUDIO IN on TV with Video/Audio cable, such as VIDEO with yellow, AUDIO Left/Right with white/ red. Connecting Component Video cable Connect the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit to the corresponding input jacks on the TV using Component video cable, such as Y with green, PB with blue, and PR with red.
Connecting 11 Connecting HDMI cable Resolution Setting Connect the HDMI OUTPUT on the unit to the HDMI IN on compatible TV with HDMI cable. (Type A, High Speed HDMI™ Cable) You can change the resolution using RESOLUTION button. Rear of the Unit TV COAXIAL Additional Information for HDMI yy When you connect a HDMI or DVI compatible device, make sure of the following: yy For 720p, 1080p and 1080i resolution on the component / progressive scan output, only noncopy protected discs can be played back.
Connecting Connecting to an Amplifier yy If your TV is not capable of handling 96 kHz sampling frequency, set the [Sample Freq.] option to [48 kHz] on the setup menu. Connecting Audio cable 2 Connect the AUDIO OUTPUT on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red. yy If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu.
System Setting Settings When the unit is turned-on at the first time, you have to select the desired language. Adjust the Setup Settings You can change the settings of the unit in the [Setup] menu. 1. Press SETUP. 2. Use w/s to select the first setup option, and press d to move to the second level. 3. Use w/s to select a second setup option, and press d to move to the third level. [DISPLAY] Menu TV Aspect Select which screen aspect to use based on the shape of your TV screen.
System Setting [AUDIO] Menu Password Set the player’s Audio options according to various disc output type you use. Sets or changes the password for lock settings. Dolby Digital / DTS / MPEG To input the standardized area code referring the Area Code List on page 20. Select the type of digital audio signal to use the DIGITAL AUDIO OUTPUT jack. [Bitstream]: Select to connect DIGITAL AUDIO OUTPUT jack to an amplifier with Dolby Digital, DTS or MPEG decoder. 3 Area Code [OTHERS] Menu B.L.
Operating 15 General Playback On-Screen Display ry Playing a Disc rt 1. While playback, press DISPLAY to show various playback information. 1. Press OPEN/CLOSE (B), and place a disc on the disc tray. 2. Press OPEN/CLOSE (B) to close the disc tray For the most DVD-ROM discs, playback starts automatically. For the Audio CD, select a track using w/s/ a/d, and press PLAY (z) or ENTER (b) to play the track. Playing a file yui 1.
Operating General operation To Do this Playback Press PLAY (z) Movie ry Pause Press PAUSE/STEP (M) To Do this Press STOP (Z) Display disc menu Press DVD MENU. (DVD Only) Play repeatedly Press REPEAT during playback. To select an option to be repeated, Press REPEAT repeatedly. Stop Skip to the next Press C or V during or previous playback Fast forward or Press c or v during fast reverse playback. Resume playback Press STOP (Z) during playback to save the stopped point.
Operating Slow down the While the playback is paused, playing speed press v repeatedly to play (Forward only) various speeds of slow motion. Press PLAY (z) to continue play at normal speed. Watch an During playback or pause mode, enlarged video press ZOOM repeatedly to select zoom mode. ZOOM: 100% : 200% : 300% : 400% : 100% w/s/a/d: Move through the zoomed picture. Music tu To Do this Play repeatedly Press REPEAT during playback. To select an item to be repeated, Press REPEAT repeatedly.
Operating The making of unauthorized copies of copyprotected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes. Be responsible Respect copyrights Photoi 4 To Do this View photo files as a slide show Use w/s/a/d to highlight (`) icon then press ENTER (b) to start slide show.
Troubleshooting 19 Troubleshooting Symptom Cause Solution No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but the unit does not work. No disc is inserted. Insert a disc. The unit does not start playback. An unplayable disc is inserted. Insert a playable disc. (Check the disc type and regional code.) The rating level is set. Change the rating level. The remote control The remote control is not does not work properly.
Appendix Area Code List Choose an area code from this list.
Appendix 21 Language Code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Specifications 6 Appendix Power requirements AC 110-240 V, 50 / 60Hz Power consumption 8W Dimensions (W x H x D) (430 x 35 x 195) mm Net Weight (Approx.) 1.4 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Laser Semiconductor laser Signal system PAL / NTSC Bus Power Supply (USB) DC 5 V 0 200 mA (DP822H only) VIDEO OUTPUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 COMPONENT / PROGRESSIVE SCAN OUTPUT (Y) 1.
DP822H-P.BJORMLK_1144-ENG.
DP822H-P.BJORMLK_1144-ENG.
