Owner's Manual

The program function enables you to store your favorite tracks from any
disc in the player memory.
A program can contain 30 tracks.
1. Insert a disc.
Audio CD or MP3/WMA Discs:
AUDIO CD or MUSIC menu appears.
2. Press PROG.
The mark will appear to the right of the word “Program” on the
right side of the menu screen.
NOTE
Press PROG. again, then the mark will disappear to exit the Program
Edit mode.
Audio CD Menu MP3/WMA Menu
Video CD: Press PROG. while playback is stopped. The program
menu appears. Press PROG. again and hold it down for a few
seconds to exit the menu.
NOTE
On a Video CD with PBC, you must set PBC to Off on the setup menu to
use the programmed playback (See “PBC” on page 36).
Video CD Menu
3. Select a track on the “List”, then press ENTER to place the selected
track on the “Program” list. Repeat to place additional tracks on the
list.
4. Press B.
Select the track you want to start playing on the “Program” list.
5. Press PLAY or ENTER to start. Playback begins in the order in
which you programmed the tracks. Playback stops after all of the
tracks on the “Program” list have played once.
6. To resume normal playback from programmed playback, select a
track of AUDIO CD (or MUSIC) list and then press PLAY.
E
E
Programmed Playback
28
Program
List
Track1
Track1
Track4
Track7
Track5
Track2
Track3
Track4
Track5
Track6
Track7
Track8
AUDIO CD
0:52:07
1 / 12
Clear All
E
Program
List
0:00:00
1 / 12
Clear All
E
MUSIC
2-Music2
2-Music2
4-Music4
6-Music6
1-Music1
1-Music1
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
Program
List
Track1
Track1
Track3
Track2
Track5
Track2
Track3
Track4
Track5
Clear All
E
VIDEO CD