Owner's Manual

17
Hookup and
Settings
Initial
Settings
In this menu
system,
there are several
ways
to
customize the
settings provided.
Most menus consist
of three levels to set
up
the
options,
but some
require
greater depth
for the
variety
of
settings.
General
Operation
1. Press HOME and select
[Setup] option.
2. Select
[Start] option
then
press
ENTER.
The
Setup
menu
appears.
3. Use v /
V
to select the desired
option.
4. While the desired item is
selected,
press
B to
move to the second level.
5. Use v /
V
to select the second desired
option.
6. Press B to move to the third level.
7. Use v /
V
to select the desired
setting
then
press
ENTER to confirm
your
selection.
Some items
require
additional
steps.
8. Press RETURN
(O) repeatedly
to exit the
Setup
menu.
Note:
Press
b
to
go
back to the
previous
level.
General
Settings
Auto
Programming
This recorder is
equipped
with a
frequency
synthesized
tuner
capable
of
receiving up
to 88 TV
channels.
Preparation:
Connect the recorder to the desired
type
of
aerial,
as shown in
Connecting
to the Aerial on
page
10.
1. Select the
[Auto Programming] option.
2. Press B to move to the third level.
[Country] option
is
highlighted.
3. Use v /
V
to select a
country
then
press
B.
[Start]
icon is
highlighted.
If
your country
is not
listed,
select
[Others]
4. Press ENTER to
begin
the channel search.
The tuner will
automatically cycle through
all
available channels in the area and
place
them in
the tuner's
memory.