Owner's Manual

Adjust the SETUP settings - more you can do

Adjust the general settings

Tunning Band – Select the appropriate band type according to the antenna

connection.

[TV]: If you are using a standard antenna to receive channels.

[CATV]: If you are using basic cable to receive channels.

Auto Channel Set – This option automatically scans and sets the available

channels.

[Start]: Start the channel scanning.

Ch. Add/Del– This feature allows you to add or erase channels from memory

manually.

[Edit]: Displays the screen which show channel editing options. (page 11)

Clock Set– Use v V b B to set the correct date and time in order to use

[Timer record].

TV Aspect – Selects the aspects ratio of the connected TV.

[4:3 Letter Box]: Select this when connecting to a standard 4:3 screen TV

and prefer the wide picture with bands on the upper and lower portions of the

screen.

[4:3 Pan Scan]: Select this when connecting to a standard 4:3 screen TV and

prefer the wide picture on the entire screen cuts off the portions that do not

fit.

[16:9 Wide]: Select this when connecting to a wide-screen TV.

Progressive Scan (For Component Video connections) – If your TV accepts

progressive format signals, you will enjoy accurate color reproduction and high

quality image by selecting [ON] option. If your TV does not accept progressive

format signals, select [OFF] option. If you are not sure about progressive format

compatibility, check the owner’s manual that came with your TV.

If your TV is incompatible with progressive format signals and you set the

[Progressive Scan] option to [ON], you will not see a picture properly. Remove

the disc in the tray and press and hold STOP for five seconds to set

[Progressive Scan] option to [OFF].

Power Save mode – Selects whether this unit is in power save mode when the

power is turned off. This option is not available when a timer recording is set.

[ON]: The front panel display is off and only signals arriving at the antenna

input are passed through when the unit is turned off.

[OFF]: Turns off the [Power Save Mode].

Factory Set – You can reset the unit to all its factory settings. Some options

cannot be reset (Rating, Password, and Area Code). The auto setup menu

appears on the screen after the factory settings.

DR385-M-BCOLLLK-ENG 6/23/08 2:10 PM Page 13