PLASMA TV OWNER'S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back mation to your dealer when you Model number : Serial number : P/NO : 3828VA0505A (AF046A, cover require 116X TX, and quote this infor- service.
Safety Warnings Instructions Safety Safety Use the set at the - lower than the altitude of 6562 feet place (2000m) get the best quality of picture and to sound. W WARNING Do not place the sources such This may - Do not or any registers, sunlight or stove and near heat so on. damp place such as likely to get wet. bathroom a fire could or give an In - Bend cable antenna building to and damaged cleaning the damaged cause of smoke or the set set.
Safety Warnings * Safety instructions have two kinds of WARNING NOTES information, and each meaning of it is as below. The violation of this instruction may cause serious The violation of this instruction may cause light injuries injuries and even damage or death. of the product. Take care of under danger that may happen specific condition. NOTES Never touch the power - This may cause an plug with wet hand. a Ensure the power cord doesn't trail like a heater.
Contents Contents Contents Time Menu Safety Warnings SafetyInstructions.......................2~3 Introduction RemoteControlKeyFunctions................6 LocationandFunctionofControls . . . . . . . . . . .7~8 MainPictureSourceSelection. Installation External Options Autoclocksetup.........................24 Manualclocksetup.......................24 SettingtheOn/Offtime.....................24 Sleeptimer.............................25 Autosleep..............................
Introduction Introduction What is a Plasma Display ? If voltage is inputted to gas in glass panels, ultraviolet rays is outputted and fused with a fluorescent light is emitted. A Plasma Display is a next generation flat Display using this phenomenon. 160° - Wide A Plasma substance. At this moment, range of vision angle Display provides than 160° more angle range of vision so that you can get a picture without distortion from any direction.
Introduction Remote Control Control - - When Key Functions using the remote control aim it at the remote control sensor of the set. maybe a defect in consecutive operation of remote control in specified brightness according There's displays the selected device. POWER switches the set off to standby. TV VCR MODE selects another device. DVD analogue or D/A TV mode. AUDIO digital TV/AV mode. selects the remote operating switches the set on from standby.
Introduction Location and Function of of Controls Controls Remote Control Sensor Power Standby Indicator standby Illuminates red in mode, Illuminates green when the set is turned on ON/OFF TV/AV MENU VOL PR TV/AV Button selects the RGB or TV, AV, Component, DVI modes. If OSD is dis- selects menu item. switches the set on from standby. played, Main Power Button MENU displays on screen menus one by one. exits the current menu. memorizes menu changes.
Introduction Location and Function of of Controls Controls Shown is - a simplified representation of the set. Here shown may be somewhat different from your set. This manual explains the features available on the DT-50PY10 series. - - S-VIDEO VIDEO L/MON AUDIO A/VINPUT2 9 R DIGITALAUDIO (OPTICAL) COMPONENT 2 DVD COMPONENT 1 INPUT .
Installation External V iewing Setups Equipment Viewing Setups Antenna Connection - Be careful for the bronze wire not to be bended in connecting to antenna input port.
Installation External Watching After - V iewing Setups Equipment Viewing Setups Cable TV for subscribing a local cable TV station and For further information of cable - installing a converter you can watch cable TV. contact the local cable TV station. TV, < Back panel of the set To watch cable TV > 1. Use the TV/AV button select VIDEO 1 on the remote control to VIDEO 2. or 2. Tune to cable service provided channels using the cable box. MONITOR OUTPUT DVD COMPONENT 2 .
Installation Watching - When external AV connecting the set to the audio/video on How to source Video = yellow, Audio (Left) = white, Audio (Right) = input jacks the set with the on < select VIDEO 1 the Operate or output jacks red. use 1. Use the TV/AV button 2. external source, match the colours of AUDIO/VIDEO an equipment: Back panel of the set > the remote control to on VIDEO 2. corresponding external equipment. equipment operating guide.
Installation External Connecting V iewing Setups Equipment Viewing Setups PC How to connect 1. To 2. Use the set's RGB INPUT picture quality, adjust the PC graphics card to 1024x768, 60Hz. or DVI (Digital Visual Interface) INPUT port for video connections, depending on your PC connector. If the graphic card on the PC does not output RGB and DVI simultaneously, connect only one of either RGB INPUT or DVI INPUT to display the PC on the set. Then, make the corresponding audio connections.
Installation Screen Adjustments This function works in the following mode: Component 1, Component 2, RGB-PC, RGB-DTV - 1. Press the OK button and then 2. Press the button and then or DVI-DTV button to select the desired / or / / picture item. appropriate adjust- button to make POSITION ments. CLOCK Position This function is to Phase & Clock (RGB-PC This function allows you to image of characters.
Installation Accessories TV VCR DVD CABLE STB AUDIO TV/AV MODE MULTIMEDIA ARC POWER MUTE 123 456 789 FAVOURITE Q.VIEW 0 PSM SSM VOL PR PIPDW TEXT/ MENU EXIT OK PIPPR- PP INPUT PIPPR+ PLAY LG TV 1.5V PAUSE REW FF Owner's Manual LIST the TV Joinning - Secure the TV assembly to the wall to assembly by joinning ? ? it to a by using 2-TV brackets 2-Wall brackets set 6-RING SPACER (option) (Only DT-60PY10 series) tumbling the TV/Wall brackets.
Installation Installation ? The set Desktop can Options Options be installed in different ways such as on a wall, or on a etc. desktop Pedestal Installation To Install on a Desktop Pedestal mount minimum allowable clearances for adequate ? The set can be mounted on a desk as ventilation. shown above. Wall Mount: Horizontal Installation To Mount on a Wall Wall mount minimum allowable clearances for ade- quate ventilation.
Operation Turning Turning - When using Turning the remote the set on the Set Set on on control, aim it just after 1. Connect power cord button on sensor on installation the set on or the set. At this moment, the set is switched to press the on 1. If the set ? (power was on on You the set to turn the set can select on selection selection or NUMBER buttons. Volume adjustment Volume Press the VOL+/- button to adjust the volume. Mute function Press the MUTE button.
Operation Channel Channel Menu Auto - - Options Options Programme Tuning can be stored in this set by programme numbers (0 to 99). Once you have will be able to use the or NUMBER buttons to scan the stations you programmed. Stations / automatic or manual modes. In Digital mode up to 400 TV stations can be stored. Up 1. to 100 TV stations Press the MENU button and then SETUP SETUP 2. Press the G 3. gramme.
Operation Channel Channel Menu Assigning a station Repeat 2. Press the mode (In Analogue only) tuning' steps 1 to 2. button to select Name. Press the 3. name the 'Manual programme 1. Options Options button. You With the button you 4. Select the next 5. Press the OK button. 6. Repeatedly blank, can use a can select in the the position by pressing +, the numeric 0 to 9 and the -, opposite A to Z. alphabet direction.
Operation Programme - Edit This function enables you to delete or skip the stored programmes. Also you can move gramme numbers or copy a blank station data into the selected programme number. 1. Press the MENU button and then 2. Press the button and then 3. Press the button to Deleting 1. 2. a Select programme display (In Analogue 3. 4. button to select the SETUP mode a Select programme following or / button.
Operation Picture Menu PSM - - Options Options (Picture Status Memory) This function adjusts the set to the best picture appearance. adjusting picture options (contrast, brightness, colour, sharpness automatically changed to User. When is and tint (NTSC input only)) manually, PSM 1. Press the PSM button ? Each press of the PSM button You ? Picture can Picture You 1. display as shown below. Mild Game adjust picture contrast, brightness, only) to the levels you prefer.
Operation - You 1. can enjoy the vivid and hi-definition Press the MENU button and then TURE picture / with LG's excellent processor technology. SETUP SETUP menu. 2. Press the button and then / button to select XD. 3. Press the button and then / button to select On XD Digital Reality button to select the PIC- pull-down 4. Press the OK 5. Repeatedly PICTURE or Off on the Brightness Colour menu. or PSM Contrast AUDIO AUDIO Sharpness button.
Operation Audio Menu SSM - - Options Options (Sound Status Memory) This function lets you enjoy the best sound without any special adjustment because the set has the option based on the programme content. When adjusting sound options (treble and bass) manually, SSM is automatically changed to User. appropriate sound 1. Press the SSM button. 2. Press the SSM button to select your desired sound. Standard You ? The sound Standard, Music, Movie and Speech and cannot be changed.
Operation Speaker adjustment - You adjust can 1. internal speaker status. Press the MENU button and then button to select the AUDIO / SETUP SETUP menu. 2. Press the 3. Press the TV button and then speaker pull-down 4. Press the OK button. 5. Repeatedly / speaker. button to select Off or On PICTURE on Balance the menu. AUDIO : Treble Bass press the MENU button to return to normal TV TIME TIME viewing.
Operation T ime Menu Options Options Auto clock setup - - - The time is The automatically set from a digital channel signal. signal includes information for the current time provided by the broadcasting clock manually, if the current time is set incorrectly by the auto clock function. Set the 1. channel digital Press the MENU button and then button to select the TIME / SETUP SETUP station. Auto clock G Off menu. 2. Press the button and then button to select Auto clock. / 3.
Operation timer Sleep - You don't have to remember to switch the set off before you go to bed. The set to standby after the preset time elapses. 1. Press the MENU button and then / sleep timer SETUP SETUP 3. Press the Press the the 4. 5. button and then Sleep button and then timer Press the OK Repeatedly or pull-down button to select / / switches the button to select the TIME menu. 2.
Operation Menu Special Special Options Options Main Picture Source Selection - Inputs Note : be set for can other or When TV, AV, Component or RGB-PC mode. AV mode is used when a video cassette recorder VCR is connected via the aerial socket the set is used in TV mode. See the 'External a (VCR), is connected to the set. equipment Equipment Viewing Setups' section. Press the MENU button and then 1. CIAL use / button to select the SPE- SETUP SETUP Main input G menu. Sub 2.
Operation Child Lock - The TV can be set unauthorized that the remote control handset is needed to control it. This feature so Press the MENU button and then 1. CIAL can be used to prevent viewing. use / button to select the SPE- SETUP SETUP menu. Main Sub 2. Press the button and then use / button to select Child lock. 3. Press the button and then use / button to select On 4. Press the OK 5. Repeatedly or PICTURE PICTURE Off.
Operation Menu Special Special Options Options Demo - Shows you how to navigate the TV's on-screen menus. Press the MENU button and then 1. CIAL 2. Press the 3. Press the or button and then button to select the SPE- / SETUP SETUP Main XD demo on the Demo Sub button to select Demo. / use button and then Press the 4. use menu. / use pull-down PICTURE button to select Auto demo your TV. XD demo : Use to scan Subtitle Child lock menu. AUDIO button to start.
Operation Lock Menu Lock - - Options Options setup Lets you set up blocking schemes to block specific channels, A password is required to gain access to this menu. 1. Press the MENU button and then use / ratings, and external viewing button to select the LOCK sources. SETUP SETUP menu. Then, press the The TV is 2. Use the Once the Lock Lock system Set button to enter the password as requested. set up with the initial password "0-0-0-0".
Operation PIP (Picture-In-Picture) (Picture-In-Picture) Option : PIP (Picture in Picture) displays a within picture a / POP / Twin Twin Picture picture. On and off Press the PIP button to switch - the sub on picture. Press EXIT button to switch it off. - Each press of PIP button - PIP Mode Note changes the screen POP Mode display as shown below. Twin Picture Mode PIP Off : a. When the sub b.
Operation eletext (option) Teletext T (option) - Teletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. - - Teletext is a free service broadcast by most TV stations which gives up-to-the-minute television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT consists of TEXT information on news, weather, systems.
Operation FASTEXT The teletext pages are colour coded along the bottom of the pressing the corresponding coloured button. screen and are selected by Page selection 1. Press the 2. You can i button to select the index page. are colour coded select the pages which along the bottom line with the same coloured buttons. 3. Corresponding to the SIMPLE teletext mode, you can select a page by entering digit page number with the NUMBER buttons in FASTEXT mode.
Miscellaneous EPG (Electronic (Electronic Programme Guide) Guide) (In (In Digital mode only) only) EPG - - This function This mode (Electronic Programme Guide) (In Digital can system has be used an only Electronic only) when the EPG information is broadcasted Guide Programme (EPG) to help your by broadcasting companies. navigation through all the possible viewing options.
Miscellaneous IR Code Code (NEC (NEC Format) How to connect G Connect your wired remote control to the Remote Control Remote Control IR Code port on the Monitor. (NEC Format) G Output waveform Single pulse, modulated with 37.
Miscellaneous Code Function (Hexa) Note 00 PR+ R/C Button 01 PR- R/C Button 02 VOL+ R/C Button 03 VOL- R/C Button 40 Up (D) Down (E) Right (G) Left (F) R/C Button 08 POWER R/C Button C4 POWER ON Discrete IR Code C5 POWER OFF Discrete IR 09 MUTE R/C Button 10 Number 11 Number 12 Number 13 Number 14 Number 15 Number 16 Number 17 Number 18 Number 19 Number 50 D/A TV R/C Button 0B TV/AV R/C Button 98 MULTIMEDIA R/C Button BF COMPONENT1 Discrete IR C
Miscellaneous Notes 36 PLASMA TV
Miscellaneous Notes Owner's Manual 37
Miscellaneous Checklist Checklist Troubleshooting Troubleshooting No picture & ? Check whether the set is turned ? Power cord inserted into wall outlet? on. No sound ? another was ? Sound muted? Press MUTE button. Check to causing ? The remote control see to p.6) No installed with the correct new batteries. as the (Refer to image is muted p.6) during the startup process of picture has not appeared Please contact your service centre, if the minutes.
Miscellaneous Product Specifications MODEL Width DT-42PY10X (inches / mm) 48 / 1216 Height (inches / mm) 27/691 Depth (inches / mm) 10.7 / 271.4 Weight (pounds Power / 86/39 kg) AC100-240V, 50/60Hz requirement Resolution 1024 768 Colour 16,770,000 (256 steps Operating Temperature Range 32 104°F ~ (Dot) of each (0 40°C) Operating Humidity Range MODEL DT-50PY10 (inches / mm) 55 / 1402 Height (inches / mm) 31.4 / 798.5 Depth (inches / mm) 12 / 302.
