COMBI HOME THEATER SYSTEM OWNER'S MANUAL MODEL (Main Unit : : DT-S650NY DT-650NY, Speakers : DTE-550TE, DTE-5100WE) PAL BZ03 Before connecting, operating or adjusting this product, carefully and read this instruction booklet please completely. Internet Address:http://www.lg.
Precautions / Safety Important notes on WARNING Notes RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents SpecialDVDFeatures....................27 Introduction SafetyPrecautions.........................2 2 Important notes on controlling this unit. . . . . . . . . TitleMenu..........................27 DiscMenu..........................27 TableofContents..........................3 BeforeUse..............................4-5 CameraAngle.......................27 .27 ChangingtheAudioLanguage. PlayableDiscs...........................4 Subtitles...........................27 Precautions...........
Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) Chapter (DVD only) Sections of a picture Audio CD (8cm/12cmdisc) In addition, this unit can or play a CD-R or Depending CD-RW that MP3 files and SVCD also. on the conditions of the ment or the CD-R/RW disc discs cannot be -- The unit cannot no data, or itself, recording equip- some played on the unit.
Before Use (Cont'd) Precautions Storing After the unit Handling When shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. The When the unit setting picture and sound of a nearby TV or radio may be distorted during playback. In this case, position the unit The away from the TV or radio, removing the disc.
Front Panel and Display Window Tape Eject Pause PAUSE( / ) playback temporarily / press repeatedly for frame-by-frame playback. STOP(A) Stops playback. Forward Fast-Forward Skip/Scan, ( ) Go to NEXT chapter/track. Press and hold for two seconds for a fast forward search. Winds the tape forwards. DVD OPEN/CLOSE Opens or ( PLAY ) Starts closes the disc tray. Reverse Skip/Scan, Rewind () Go to beginning of current chapter/ track or to PREVIOUS chapter/track.
Remote Control OPEN/CLOSE EJECT - POWER - Open or close Tape Eject. VOLUME the disc tray. Access the On-Screen Display. Shows you the current time or counter. POWER Switch this unit ON VCR OFF. or SETUP/ i AUX LEVEL DELAY Access For selecting the digital signal from DIGITAL AUDIO IN (OPTICAL). TEST TONE SOUND EFFECT - Acknowledge Switch between your TV's tuner and the VCR's internal tuner. MUTE MARKER DISC MENU Access menu of a menu. SOUND EFFECT SEARCH a DVD disc.
Rear Panel SPEAKER Connectors VIDEO OUT SELECTOR Refer to explanation DIGITAL AUDIO IN (OPTICAL) below*. S-VIDEO OUT VCR IN+OUT/DVD OUT 4 SPEAKER AERIAL DVD EXCLUSIVE OUT RF.OUT DIGITAL AUDIO IN S -VIDEO COMPONENT VIDEO OUTPUT EURO AV1 AUDIO/VIDEO S-VIDEO OUT DVD/VCR OUT OPTICAL AC Power Cord Connect to a power source. AERIAL Connect the aerial this using jack.
Connections Tips Depending Digital Device your TV and other equipment you wish to connect, there are various ways you could connect the unit. on OPTICAL OUT Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. Rear of this unit PREATION (S-Video connection) Caution -- Make sure this unit is connected Set the TV to the correct video directly to the input channel. TV.
Connections (Continued) Speaker System Connection Connect the speaker speakers using the supplied by matching the colors of cords the terminals and those of the cords. To obtain the best possible surround sound, speaker parameters (distance, level, etc.). the adjust Notes Be to match the speaker cord to appropriate terminal on the components:+to+and--to--.Ifthe sure the cords VCR IN+OUT/DVD OUT reversed, the sound will be are 4 distorted and will lack base.
Before Mini Operation for Sound Mode Glossary Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources bearing the trademark such as discs, DVD and compact discs, etc. DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC.
Before Operation (Continued) Sound Mode You of the Note surround sound enjoy pre-programmed can simply by selecting according to the one sound fields quency). program you want to listen to. Each time you press SOUND EFFECT button, the sound mode is changed as the following order; PROLOGIC → HALL 1 → HALL 2 → Sound Level THEATER You 1 Note For the DVD, you can select only when PCM indicator is shown in the display window.
Before Delay In Operation (Continued) Time Center Dolby Digital Setting Pro Dolby or Logic mode it is assumed that the distance from the listener to each of the speakequal. If not setting the delay times of the center rear speakers the sound will be heard simultaneously is ers or by the listener. The interval from the to the listener.
Before Tuning Operation in a VCR part - video channel on your TV 6 The The output frequency of this video recorder (VCR) is set at UHF channel 36. If channel 36 is already used by another TV station, or if picture is distorted, you can change the transmitter channel of your VCR. Stages 5 will show you how to change the output frequency of your VCR. Your TV receives recorder signals 8 ~ RF a channel number 2 usually on on Press PROG. 3 or 4 to select another video channel.
Before Setting Operation the clock - VCR part To set the colour system Manually The clock in your VCR controls time and date settings for your VCR. 1 1 Press i. Press 1 or 2 to select TIME DATE. Press OK. :. - - -- -- -- 2 The main 3 Press 1 or Press 3 or 4 menu --- . will appear on the TV screen. 2 to select the SYSTEM and press OK. 4 system used. HHMMDDMMYY -- Press i.
Before How to Operation VCR part - the main using Tuning menu This VCR menus The can easily be programmed by using displayed on screen. menus are the controlled from the Remote please Switch on your TV set and video recorder the POWER button. 2 by pressing menu will appear on the TV is weak your VCR may signal screen. turn to the MANUAL TUNING section on page 17. 1 Press i button.
Before Tuning In certain Operation VCR part - in TV Stations areas of the country broadcast will 4 Searching Press Manually stop when it locates a station. 2 to select MFT. signals Press 3 or 4 to adjust. may be too weak for your VCR's automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually 1 PR CH MFT 09 C10 00 in order for your VCR to store them. CHANNEL/CABLE Press i.
Before Operation Changing - VCR part the order of TV Stations Deleting After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them against! The instructions given on this page will show you how you can simply move them into your desired order. 1 Press i. The main menu will appear on the TV Press 1 or 2 to select the PR SET. Press OK. TV Stations After tuning TV stations into your VCR you may wish to delete a station.
Before General This manual Operation DVD - part Temporary Explanation the basic instructions for gives operating require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, that the indicating operation is not permitted by this unit is not available or On-Screen The TV general playback screen. 1 2 3 or AB be can highlighted. the change The number buttons (e.g.
Before Initial You - DVD General Settings part Menu Settings set your own Personal Preferences on this unit. can Initial 1 Operation (Continued) Select you Language menu Operation appears. Disc Audio English Disc Subtitle German Disc Menu Russian Country Hungarian Code Aspect Menu Disc Subtitle Language PBC English Disc Menu French Rating German Code Aspect Menu menu Original Disc Audio Country This is the Polish Rating TV TV menu. when you press SETUP.
Before Operation (Continued) - DVD Parental Control Rating Code Country DVD Enter the code of DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain part scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes available for selection on some discs. Ratings are country-dependent.
with Operation Playing You will a only tape playback, Shuttle : or still picture press F or G. You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) Slow motion tape 5 During playing back be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC To switch off the slow motion and shuttle, press the desired function. tapes (on PAL TV).
Operation with Instant Timer tape Press LP if you wish to record in Recording (ITR) Your VCR allows you to make variety of simple methods: 5 Standard Play. recordings using SP will a Recording (ITR) start recording for a set period of time or until the immediately Your VCR time record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be 1 quality Make VCR when slight a using loss in Insert 2 VCR. your VCR.
with Operation tape recording using On Screen Display Timer 6 You may set up to seven timer record events within one month of the current date. Press the numbered buttons to enter the recording start and end times of the programme that you wish to record. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. You may also select the the start and end times by pressing Note or 4.
Operation Playing with DVD and Video CD DVD and Video CD a Playback Setup Turn on nected to the DVD 1 DVD VCD2.0 the TV and select the video General Features Note VCD1.1 input source con- player. features may also be available Press OPEN/CLOSE to open the disc Load your chosen disc in the 2 facing tray. Press OPEN/CLOSE to close the starts appears on automatically. If Moving tray, with the label up.
with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD Frame-by-frame playback VCD1.1 1 Press PAUSE/STEP The player Video CDs (continued) will now required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). on the TV screen. playback, press RANDOM again display "NORMAL" on the TV screen.
with DVD and Video CD Operation General Features Zoom VCD2.0 DVD (continued) VCD1.1 Checking during playback or still playback to acti- vate the Zoom function. If you press ZOOM repeatedly, the increases up to six times. 2 Use the 1 2 zoomed 3 4 buttons to picture. 3 Press CLEAR to resume normal the the through playback or the contents of DVD Video DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
with Audio CD and MP3 Discs Operation Playing The DVD Audio CD and MP3 discs an Player CD-ROM, CD-R, Before Insert 1 The read the notes menu recordings, on 1 Press and hold BACKWARD . or FORWARD > for about two seconds The MP3 player will repeatedly tray. the TV screen. Program TRACK 1.MP3 TRACK 2 TRACK 2.MP3 TRACK 3 TRACK 3.MP3 TRACK 4 TRACK 4.MP3 TRACK 5 TRACK 5.MP3 TRACK 6 TRACK 6.MP3 TRACK 7 TRACK 7.
Programmed Playback Programmed Playback CD VCD2.0 MP3 with Audio CD Note Program allows you to store your favorite particular disc in the player memory. contain 32 tracks The 2 tracks for or is displayed on the TV mode to enter Video CD with PBC, you must set PBC to Off on the menu to use the Program function. See page 20. 60 tracks tray. Insert Video CD and close the 2 screen. Press PROGRAM on a 1 menu during playback or in the Program Edit mode.
Additional On Screen Operation - VCR part Video Doctor Display You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. (Self-Diagnosis) This feature informs you that there is a problem with error messages will appear on the TV your VCR. These screen. 1 Press i.
Additional Operation Hi-Fi Stereo Sound - VCR part System Your VCR will record and In addition it has playback Hi-Fi stereo sound. digital stereo sound to record and playback the stereo NICAM a decoder. This allows you sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track OPERATION and two VHS Hi-Fi stereo audio tracks.
Additional Operation Last Condition DVD This CD player - DVD part Notes Memory VCD1.1 memorizes the last condition for the last An MP3 file is audio data files that have the The player. if you switch off the play it. player before commencing to Player Video Mode VCD2.0 or means change single displayed on the TV screen. quality has improved. If not, procedure until picture quality is repeat the above improved. 7. MODE1 → MODE2 MODE5 → MODE1 → → MP3 use a new 8.
Special Recording Copying from DVD To VCR This unit allows you to copy the contents of VCR tape with a press of the COPY button. Recording from a DVD to a recorder protected, 1 2 recorder With this video recorder you an external source, such as Note If the DVD you to copy is copy not be able to copy the disc. you may a blank VCR videotape Press the COPY button into the VCR deck. If the DVD disc camcorder.
Troubleshooting Check the following guide for the possible cause DVD or VCR do not a before problem service. contacting Cause Symptom work of DVD or Correction VCR button is not switched Refer to page 2. properly. properly. No power. The power cord is disconnected. Plug the power securely. The power is on, but the DVD player does not work. No disc is inserted. Insert a disc. (Check that the DVD or, audio CD indicator in the display window is lit.
Language Code Enter the appropriate (See page 20).
Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 21).
Specification General Power requirements consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity AC 200-240 V, 50/60 Hz Power 72W Timer 24 hours RF Modulator UHF 22 430 X 97.5 X 360 6.7 mm (WxHxD) kg 5˚C to 35˚C (41˚F to 95˚F) REF NC 5%to90% - display tape 68 (Adjustable) System Semiconductor laser, wavelength 650 nm Double azimuth 4 heads, helical scanning.
P/NO : 3834RP0091T
