RECEIVER/ DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL (Main Unit : : DT-777NW DT-777NW, Speakers : DTE-655T, DTE-655C, DTE-604W) PAL CD-R/RW Before connecting, operating or adjusting this product, carefully and read this instruction booklet please completely.
Safety Precautions/Important notes on this unit SERIAL NUMBER: The serial number is found CAUTION on the back of this unit. This number is unique to this unit and not available others. You should record requested information here and retain this guide as a permanent record of your purchase. RISK OF ELECTRIC SHOCK DO NOT OPEN Model No. CAUTION: TO REDUCE THE RISK Serial No.
Table of Contents Introduction SafetyPrecautions.........................2 2 Important notes on controlling this unit. . . . . . . . . TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 Operation with Audio CD and MP3/WMA Disc PlayinganAudioCDandMP3/WMADisc. NotesonMP3/WMARecordings. . . . . . . . . . . . . . 27-28 .27 .27 . . Pause.............................28 MovingtoanotherTrack...............
Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) In addition, this unit play can a DVD-R, DVD±RW, Kodak PICTURE CD and CD-R audio titles, MP3, WMA (DVD only) DVD or or CD-RW that contains JPEG files and SVCD also. or accompanying feature content additional feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily.
Before Use (Continued) Precautions Storing After the unit Handling When shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. The When the unit setting picture and sound of a nearby TV or radio may be distorted during playback. In this case, position the unit The away from the TV or radio, removing the disc.
Front Panel and Display Window Tape Eject Forward Fast-Forward Skip/Scan, Go to NEXT Press and hold for two seconds for ( ) chapter/track. a fast forward search. Winds the tape forwards. DVD OPEN/CLOSE Opens or ( ) PROG./PRESET Disc a Starts Reverse Scans up or down through memorized channels or radio frequencies (stations). Insert PLAY closes the disc tray. Go to or a radio stations disc here. reverse DVD to VCR Copy ( ) chapter/track PREVIOUS chapter/track. a fast search.
Remote Control OPEN/CLOSE EJECT Open or close Tape Eject. - POWER - VOLUME the disc tray. POWER VCR Switch this unit ON FM/AM SETUP/ i Access or OFF. or AUX AV SOUND MODE PROGRAM - - screen Selects operational mode of remote control. SELECT/ENTER/OK (FM TITLE AM or the listening bands). source for recording into tape. MARKER SOUND MODE Select numbered items in SETUP a menu.
Rear Panel VIDEO IN IN (VCR Receive the video VIDEO OUT Connect to a AV1) signals from external an source to VCR. (DVD/VCR OUT) TV with video inputs. COMPONENT VIDEO OUT Connect to a (Y Pb Pr) (DVD inputs. EXCLUSIVE OUT) TV with Y Pb Pr FM ANTENNA CONNECTOR Connect the FM antenna to this terminal. AERIAL S-VIDEO OUT Connect the OUT) aerial a Connect to this a EXCLUSIVE TV with S-Video input. jack. AC Power Cord Connect to using (DVD SPEAKER Connectors power source.
Connections Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. -- -- Caution Make sure this unit is connected directly to the TV. Set the TV to the correct video input channel. Do not connect this unit's AUDIO OUT jack to the phono in jack (record deck) of your audio system.
Connections (Continued) Speaker System Connection Connect the speakers using the supplied speaker cords. possible surround sound, adjust the speaker parameters (distance, level, etc.). To obtain the best Notes Be sure to match the are If you use volume to the on -- to avoid excessive carefully DVD/VCR COMPONENT AV1 OUT VIDEO OUT SPEAKER output on the AERIAL SR(8)FR(8)W(4)C(8)FL(8)SL(8) Y --. DVD EXCLUSIVE OUT RF.OUT L S-VIDEO OUT Pb AUDIO DVD/VCR OUT R Pr speakers.
Before Operation Glossary for Sound Mini Mode BYPASS Software with multichannel surround audio according Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which tional original masters) and results in excepthroughout a true 360 degree sound field.
Before Tuning Operation in a VCR part - video channel on your TV 6 The The output frequency of this video recorder (VCR) is set at UHF channel 36. If channel 36 is already used by another TV station, or if picture is distorted, you can change the transmitter channel of your VCR. Stages 5 will show you how to change the output frequency of your VCR. Your TV receives recorder signals 8 ~ RF channel number 7 on 2 Insert your VCR. video tape into your VCR the remote control.
Before Setting Operation the clock - VCR part To set the colour system Manually The clock in your VCR controls time and date settings for your VCR. 1 1 Press i. Press 1 or 2 to select TIME DATE. Press OK. :. - - -- -- -- 2 The main 3 Press 1 or Press 3 or 4 menu --- . will appear on the TV screen. 2 to select the SYSTEM and press OK. 4 system used. HHMMDDMMYY -- Press i.
Before How to Operation - VCR part the main using Tuning menu This VCR menus The can easily be programmed by using displayed on screen. menus are the controlled from the Remote Control Handset. 1 2 If the TV broadcast by pressing Press i button. menu will appear on the TV screen. Automatically is weak your VCR may signal not detect the necessary information and will not be able to store them correctly.
Before Tuning In certain Operation VCR part - in TV Stations areas 4 Searching Press Manually of the country broadcast will stop when it locates a station. 2 to select MFT. signals Press 3 or 4 to adjust. may be too weak for your VCR's automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually 1 PR CH MFT 09 C10 00 in order for your VCR to store them. CHANNEL/CABLE Press i.
Before Operation Changing - VCR part the order of TV Stations Deleting After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them. The instructions given on this page will show you how you can simply move them into your desired order. 1 Press i. The main menu will appear on the TV Press 1 or 2 to select the PR SET. Press OK. TV Stations After tuning TV stations into your VCR you may wish to delete a station.
Before General This manual Operation DVD - part Temporary Explanation the basic instructions for gives operating require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, that the indicating operation is not permitted by this unit is not available or On-Screen The TV general playback screen. 1 2 3 Press 3 or can be highlighted. the change The number buttons (e.g.
Before Initial You DVD - part Menu Settings set your own Personal Preferences on this unit. can Initial 1 Operation General Settings Select you Language a see Operation Press SETUP. The setup for the setup language Disc Audio English Disc Subtitle Spanish Disc Menu menu appears. Country French Code Italian Aspect Menu Disc Subtitle Language French Disc Menu 5.
Before 5.1 Operation Speaker settings DVD - part DVD Dynamic Range Control (DRC) Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 37.) Disc Subtitle R Disc Menu Code Aspect Menu Language Volume Size digital audio technology. However, quietest ones).
Before Operation DVD - part Parental Control Rating DVD Enter the code of DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain Code Country scenes on the disc. These scenes are Disc Subtitle are were SA Disc Menu Rating Country The Parental Control feature allows country-dependent.
with Operation Playing You will a only tape playback, Shuttle : or still picture press F or G. You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) Slow motion tape 5 During playing back be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC To switch off the slow motion and shuttle, press the desired function. tapes (on PAL TV).
Operation with Instant Timer tape Press LP if you wish to record in Recording (ITR) Your VCR allows you to make variety of simple methods: recordings using SP will a Recording (ITR) start recording for a set period of time or until the immediately Your VCR time record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be quality when as SP.
with Operation tape recording using On Screen Display Timer 6 You may set up to seven timer record events within one month of the current date. Press the numbered buttons to enter the recording start and end times of the programme that you wish to record. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. You may also select the the start and end times by pressing Note or 4.
Operation Playing with DVD and Video CD DVD and Video CD a Playback Setup Turn on DVD VCD2.0 the TV and select the video nected to the DVD General Features Note VCD1.1 input source con- player. features may also be available Audio system: Turn on the audio system and select the input source connected to the DVD 1 Moving player. Press OPEN/CLOSE to open the disc Unless stated otherwise, all operations described use the remote control.
with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD Frame-by-frame playback player will now - Track/All/Off Repeat repeat the track currently playing, press REPEAT. 1 To VCD1.1 1 Press PAUSE/STEP The Video CDs (continued) The Repeat Track icon appears on the TV screen. repeat the disc currently playing, press REPEAT 2 To a second time. during playback. The go into PAUSE mode.
with DVD and Video CD Operation General Features Zoom VCD2.0 DVD (continued) VCD1.1 Checking during playback or still playback to acti- vate the Zoom function. If you press ZOOM repeatedly, the increases up to six times. 2 Use the 1 2 zoomed 3 4 buttons to picture. 3 Press CLEAR to resume normal the the through playback or the contents of DVD Video DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc CD MP3 The DVD Notes MP3/WMA Insert 1 play Recordings a the on compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". MPEG1 audio files that have The right. disc and close the player can tray. About CD; Audio CD menu appears on the TV go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 screen a technology.
with Audio and MP3/WMA Disc Operation CD Pause MP3 1 Press PAUSE/STEP WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To repeat 1 press CD another Track MP3 WMA Press . twice track. case to briefly step back to the previous of audio CD, to go directly to any track, enter using the numbered buttons (0-9) during playback.
Operation Viewing with JPEG Disc JPEG disc a JPEG Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on the right. This DVD 1 Insert disc and close the a TV menu to another File Press . or > once advance to the next file 1 Press PAUSE/STEP appears on during viewing a picture to the previous file. to or Still Picture tray. The MP3/WMA-JPEG choice Moving the screen. slide show.
Programmed Playback CD VCD2.0 with Audio CD Programmed Playback VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program with Video CD Note On a setup Video CD with PBC, you must set PBC to Off on the menu to use the Program function. See page 19. contain 30 tracks. can Press PROGRAM 1 WMA Programmed Playback and MP3/WMA disc The MP3 mode to enter the during playback or in Program Edit mode.
Additional On Screen Operation - VCR part Video Doctor Display You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. (Self-Diagnosis) This feature informs you that there is a problem with error messages will appear on the TV your VCR. These screen.
Additional Operation Hi-Fi Stereo Sound Your VCR will record In addition it has - VCR part System playback Hi-Fi stereo sound. digital stereo sound to record and playback the and stereo NICAM a decoder. This allows you sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks.
Additional Operation Last Condition DVD This CD player - DVD part Memory VCD1.1 memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings OPERATION memo- rized, the latest stop position is automatically recalled. Notes -- -- Settings are stored in memory for use any time.
Special Recording Copying from DVD To VCR Recording from This unit allows you to copy the contents of a DVD to a VHS tape with a press of the COPY/MEMORY button. protected, 1 2 Insert VHS 3 Press DVD. a or a can make copying recordings from from another video camcorder. attempting Note In the Insert the disc you wish to copy in the DVD deck and close the disc tray. Copy With this video recorder you an external source, such as to copy is copy not be able to copy the disc.
Radio Operation the Radio Stations Presetting preset 30 stations for FM and AM. Before You can ing, make 1 front until the the and TV sure tun- that you have turned down the volume. Press FM/AM panel display on the remote control frequency to the Radio Listening or on the band appears on Preset radio stations in this unit's memory first the radio stations" on the left). (see "Presetting 1 screen.
Radio Tuning 1 2 3 Operation (Continued) into Station a Press FM/AM on the remote control front until the the and TV panel display Press FM/AM front panel on Manually or on the band appears frequency on screen. the remote control or on the to select the desired band. Press TUNING 3 1 or 4 on the front panel or the remote control to tune in or 2 on into a Station press the desired station.
Speaker Settings Make the following settings for the built-in 5.1 channel surround decoder. If you connected Distance lets the Disc Audio R Disc Menu Code Volume Size Aspect Menu R to your unit, setting the know how far the sound has listening point. This allows speaker to reach the listener at 30.48 cm) the sound from each Front L Rating Country speakers speakers to travel to reach your set Disc Subtitle TV Distance time.
Troubleshooting Check the following guide for the possible cause or VCR do not a before problem service. contacting Cause Symptom DVD work of DVD or Correction VCR button is not switched Refer to page 2. properly. properly. No power. The power cord is disconnected. Plug the power securely. The power is on, but the DVD player does not work. No disc is inserted. Insert a disc. (Check that the DVD or, audio CD indicator in the display window is lit.
Language Code Enter the (See appropriate 18).
Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 20).
Specification General Power requirements consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity AC 200-240V, 50/60 Hz Power 74W Timer 24 hours RF Modulator UHF 22 430 X 83.5 X 360 6.3 mm (w/h/d) kg 5˚C to 35˚C (41˚F to 95˚F) REF NC 5%to90% - display tape 68 (Adjustable) System Semiconductor laser, wavelength 650 nm Double azimuth 4 heads, helical scanning.
JEDDAH MAIN SERVICE SAFETY PRECAUTION THIS EQUIPMENT MUST BE DISCONNECTED FROM CENTER P.O.BOX 704, JEDDAH 21421 KINGDOM OF SAUDI ARABIA THE MAINS POWER SUPPLY WHEN IT IS NOT IN TEL) USE. DO NOT ALLOW THIS UNIT TO BE EXPOSED TO 02-629-2929 JEDDAH QUICK SERVICE TEL) RAIN OR MOISTURE. 02-663-3888 EXT. CENTER 340,343 RIYADH BRANCH SERVICE CENTER CAUTION TEL) TO PREVENT ELECTRIC SHOCK, DO NOT 01-461-5559 AL KHOBAR BRANCH SERVICE CENTER REMOVE THE COVER.