Owner's Manual

7
How to attach the Cable Cover
If you want to, install it as shown below.
Using the round shaped support
To set up this unit on the table or other level space, rotate the round shaped
support on the back of the unit to the arrow direction as show below.
Wall Mounting
If you want to, you can mount the unit on a wall.
You need to have hooks available that snugly fit into the hanging holes in the
back of the unit. Screw your hooks into the wall.
Ensure that the unit locks onto the hooks and that the hooks are strong enough
to support the weight before releasing the hand.
Wall
76 mm
less than 8 mm
less than 3 mm
Hooks
Cable Cover
DV4S2H-N.BPANLLK_5966_ENG 3/5/09 9:22 AM Page 7