ENGLISH ENGLISH OWNER’S MANUAL DVD Player Please read this manual carefully before operating your set and retain it for future reference.
Getting Started Safety Informaion 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. Notes on Copyrights This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Getting Started Important Safety Instructions 1 Getting Started 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Table of Contents Table of Contents 1 Getting Started 2 6 6 6 6 6 7 8 8 8 9 Safety Informaion Introduction – Symbols Used in this Manual – About the “&” Symbol Display – Regional Code – Playable Discs – File compatibility Front panel Rear panel Supplied Accesorries Remote control 2 Connecting 10 10 10 11 11 11 Connecting to your TV – Connecting Video / Audio cable – Connecting Component Video cable Connecting to an Amplifier – Connecting Audio cable – Connecting COAXIAL (digital audio) cable 3 Syst
Getting Started Introduction 1 Symbols Used in this Manual Getting Started A section whose title has one of the following symbols are applicable only to the disc represented by the symbol. Playable Discs DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented. DVD±R (8 cm / 12 cm disc) - Video mode and finalized only - Supports the dual layer disc also r DVD-Video, DVD±R/RW t Audio CDs - DVD±R discs that contain Movie, Music or Photo files.
Getting Started File compatibility 7 PHOTO Recommended size: less than 2 MB Overall The file name is limited to 20 characters. Depending on the size and number of the files, it may take several minutes to read the contents on the media. Maximum Files/Folder: Less than 600 (total number of files and folders) , Notes of USB Device (DV642/DV647 only) 1 Do not extract the USB device during operation (play, etc.).
Getting Started Front panel 6 5 1 7 Getting Started 5 V a Disc Tray f B (Open / Close) z (Play) C/V (Skip) Z (Stop) 1 (Power) b Display window c Remote sensor d MIC. (Microphone jack) (DV641/DV647 only) g USB Port (DV642/DV647 only) e VOL.
Getting Started 9 Remote control • • • • • • • • • • c • • • • • • • • • DVD MENU : Accesses or exits the DVD menu. DISPLAY: Accesses On-Screen Display. x (RETURN): Returns the former menu or exits the menu, and change to the USB mode. wsad (Direction buttons): Selects an option in the menu. b (ENTER): Confirms menu selection. • • • • • • • • • • d • • • • • • • • • [ (AUDIO): Selects an audio language or audio channel. ] (SUBTITLE): Selects a subtitle language.
Connecting Connecting to your TV Connecting Video / Audio cable 2 Connecting Component Video cable Connect the COMPONENT VIDEO OUT on the unit to COMPONET VIDEO IN on TV with COMPONET cable, such as Y with green, Pb with blue, and Pr with red. Connect the VIDEO/AUDIO OUT on the unit to VIDEO/AUDIO IN on TV with AV cable, such as VIDEO with yellow, AUDIO Left/Right with white/ red.
Connecting Connecting to an Amplifier Connecting Audio cable Connecting COAXIAL (digital audio) cable Connect the COAXIAL (digital audio out) on the unit to Digital Audio IN (COAXIAL) on amplifier with COAXIAL cable.
System Setting Setup When the unit is turned-on at the first time, you have to select the desired language. (optional) Adjust the settings You can change the settings of the player in the [SETUP] menu. 1. Press SETUP. 2. Select the first setup option using ws and press d to move to the second level. 3 3. Select a second setup option using ws and press d to move to the third level. System Setting 4. Select a desired setting using ws and press ENTER to confirm. 5.
System Setting [LOCK] Menu Move to [Area Code] by pressing d. Press ENTER after input the 4-digit password. Input the same 4-digit with password again to verify and press ENTER. The Rating and Password menu will be activated. 13 [OTHERS] Menu B.L.E (Black Level Expansion) Select [On] or [Off ] to expand the black level or not. It just operates when TV system is set to NTSC. Rating REC Bitrate (DV642/DV647 only) Input the 4-digit password and press ENTER. Select the level from 1(Kids) to 8 (Adult).
Operating On-Screen display General Playback You can display and adjust various information onscreen about the loaded disc and USB Device. Playing Disc Displaying content information on-screen ry 1. Press DISPLAY to see the various playback information. 2. Select an available contents by pressing wsad and ENTER. 3. Change an available content by pressing the numerical button and ENTER. 4. Press DISPLAY to escape from playback information. 4 1. Press B, and place a disc on the disc tray. 2.
Operating General operation 15 Advanced Playback Movie ry To Do this To Do this Playback Press z Press DVD MENU (DVD Only) Pause Press M Display disc menu Stop Press Z Play repeatedly Press REPEAT during playback. Skip to the next or previous Press C or V during playback Fast / slow playback forward Press v during playback Resume playback Press Z during playback to save the stopped point.
Operating Music tu To Do this Play repeatedly Press REPEAT during playback. Press REPEAT repeatedly. Track/ ALL/(REPEAT Off ) Create or Press PROGRAM on stop mode, delete your and then E will be displayed on own program screen. Select the desired one or more files or tracks by pressing ENTER.
Troubleshooting 17 Troubleshooting Symptom Cause Solution The power cord is disconnected. Plug the power cord. The unit does not start playback. An unplayable disc is inserted. Insert a playable disc. (Check the disc type and regional code.) The rating level is set. Change the rating level. The remote control does not work properly. The remote control is not pointed at the remote sensor on the unit. Point the remote control at the remote sensor of the unit.
Appendix Area Code List Choose an area code from this list.
Appendix 19 Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Specifications Power requirements AC 110 - 240 V, 50 / 60 Hz Power consumption 11 W Dimensions (W x D x H) Approx. (360 x 200 x 35) mm Net Weight (Approx.) 1.4 kg Operating temperature 0 °C to 40 °C Operating humidity 5 % to 90 % Laser Semiconductor laser Signal system PAL / NTSC Bus Power Supply (USB) 5 V 0 500 mA Video Out 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 Component Video Out (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1, (PB)/(PR) 0.