Owner's Manual

Connecting 11
Connecting
2
Connecting to an
Amplifi er
Connecting Audio cable
Connect the AUDIO OUTPUT on the unit to 2CH
AUDIO IN on ampli er with Audio cable, such as
AUDIO Left/Right with white/red.
Audio Cable
Receiver / Ampli er
Rear of the Unit
Connecting COAXIAL
(digital audio) cable
Connect one of the unit’s DIGITAL AUDIO OUTPUT
(COAXIAL) jacks to the corresponding jack on your
ampli er.
OPTICAL
Rear of the Unit
Receiver / Ampli er
Coaxial Cable

If your TV is not capable of handling 96 kHz
sampling frequency, set the [Sample Freq.]
option to [48 kHz] on the setup menu.

If your TV is not equipped with Dolby Digital
and MPEG decoder, set the [Dolby Digital] and
[MPEG] options to [PCM] on the setup menu.

If the audio format of the digital output
does not match the capabilities of your
ampli er, the ampli er will produce a strong,
distorted sound or no sound at all.

To see the audio format of the current disc
in the on-screen display, press AUDIO.

This unit does not perform internal (2
channel) decoding of a DTS sound track.
To enjoy DTS multi channel surround, you
must connect this unit to a DTS compatible
ampli er via one of this unit’s digital audio
outputs.
,
Note