Owner's Manual
Connecting 11
Connecting
2
Connecting to an
Amplifier
Connecting Audio cable
Connect the AUDIO OUT on the unit to 2CH AUDIO
IN on amplier with Audio cable, such as AUDIO
Left/Right with white/red.
Connecting COAXIAL (digital
audio) cable
Connect the COAXIAL (digital audio out) on the
unit to Digital Audio IN (COAXIAL) on amplier with
COAXIAL cable.
y
If your TV is not capable of handling 96 kHz
sampling frequency, set the [Sample Freq.]
option to [48 KHz] on the setup menu (See page
12).
y
If your TV is not equipped with Dolby Digital
and MPEG decoder, set the [Dolby Digital] and
[MPEG] options to [PCM] on the setup menu
(See page 12).
Connecting HDMI cable
Connect the HDMI OUT on the unit to the HDMI IN
on amplier with HDMI cable.
Connect the HDMI OUT jack on amplier to HDMI
IN jack on TV with HDMI cable, if the amplier has
HDMI OUT jack.
Audio Cable
Amplier/
Receiver
Rear of the Unit
Coaxial Cable
Amplier/
Receiver
Rear of the Unit
Rear of the Unit
TV
HDMI Cable
Amplier/
Receiver
HDMI Cable